[PATCH] [Nios2]: Add Altera JTAG UART driver

Franck JULLIEN franck.jullien at gmail.com
Mon Jun 6 03:04:42 EDT 2011


Hi Sascha,

2011/6/6 Sascha Hauer <s.hauer at pengutronix.de>

> Hi Franck,
>
> On Sat, Jun 04, 2011 at 09:29:29PM +0200, franck.jullien at gmail.com wrote:
> > From: Franck Jullien <franck.jullien at gmail.com>
> >
> > Add ALtera JTAG UART driver.
> >
> > Signed-off-by: Franck Jullien <franck.jullien at gmail.com>
> > ---
> >  drivers/serial/Kconfig              |   10 +++
> >  drivers/serial/Makefile             |    1 +
> >  drivers/serial/serial_altera_jtag.c |  106
> +++++++++++++++++++++++++++++++++++
> >  3 files changed, 117 insertions(+), 0 deletions(-)
> >  create mode 100644 drivers/serial/serial_altera_jtag.c
> >
> > diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> > index 9e05f4b..c8f9ecd 100644
> > --- a/drivers/serial/Kconfig
> > +++ b/drivers/serial/Kconfig
> > @@ -48,6 +48,16 @@ config DRIVER_SERIAL_ALTERA
> >       default y
> >       bool "Altera serial driver"
> >
> > +config DRIVER_SERIAL_ALTERA_JTAG
> > +     depends on NIOS2
> > +     default n
> > +     bool "Altera JTAG serial driver"
> > +
> > +config ALTERA_JTAG_UART_BYPASS
> > +     depends on DRIVER_SERIAL_ALTERA_JTAG
> > +     default y
> > +     bool "Don't block on serial putc if JTAG is not connected"
>
> Is there a reason to block on putc if JTAG is not connected? Without
> strong reasons I think this option should be removed.
>
>
Well, there is not....I copied this from u-boot but I never used this
feature.
You're right, I'll remove it.

Franck.



> Sascha
>
> > +
> >  config DRIVER_SERIAL_NS16550
> >       default n
> >       bool "NS16550 serial driver"
> > diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
> > index df9e705..8b56d15 100644
> > --- a/drivers/serial/Makefile
> > +++ b/drivers/serial/Makefile
> > @@ -17,3 +17,4 @@ obj-$(CONFIG_DRIVER_SERIAL_NS16550)         +=
> serial_ns16550.o
> >  obj-$(CONFIG_DRIVER_SERIAL_PL010)            += serial_pl010.o
> >  obj-$(CONFIG_DRIVER_SERIAL_S3C24X0)          += serial_s3c24x0.o
> >  obj-$(CONFIG_DRIVER_SERIAL_ALTERA)           += serial_altera.o
> > +obj-$(CONFIG_DRIVER_SERIAL_ALTERA_JTAG)              +=
> serial_altera_jtag.o
> > diff --git a/drivers/serial/serial_altera_jtag.c
> b/drivers/serial/serial_altera_jtag.c
> > new file mode 100644
> > index 0000000..70bc5a9
> > --- /dev/null
> > +++ b/drivers/serial/serial_altera_jtag.c
> > @@ -0,0 +1,106 @@
> > +/*
> > + * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
> > + * Scott McNutt <smcnutt at psyent.com>
> > + *
> > + * (C) Copyright 2011 - Franck JULLIEN <elec4fun at gmail.com>
> > + *
> > + * See file CREDITS for list of people who contributed to this
> > + * project.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > +#include <common.h>
> > +#include <driver.h>
> > +#include <init.h>
> > +#include <malloc.h>
> > +#include <asm/io.h>
> > +#include <asm/nios2-io.h>
> > +
> > +static int altera_serial_jtag_setbaudrate(struct console_device *cdev,
> int baudrate)
> > +{
> > +     return 0;
> > +}
> > +
> > +static void altera_serial_jtag_putc(struct console_device *cdev, char c)
> > +{
> > +     struct nios_jtag *jtag = (struct nios_jtag *)cdev->dev->map_base;
> > +     uint32_t st;
> > +
> > +     while (1) {
> > +             st = readl(&jtag->control);
> > +             if (NIOS_JTAG_WSPACE(st))
> > +                     break;
> > +#ifdef CONFIG_ALTERA_JTAG_UART_BYPASS
> > +             if (!(st & NIOS_JTAG_AC)) /* no connection */
> > +                     return;
> > +#endif
> > +     }
> > +
> > +     writel(c, &jtag->data);
> > +}
> > +
> > +static int altera_serial_jtag_tstc(struct console_device *cdev)
> > +{
> > +     struct nios_jtag *jtag = (struct nios_jtag *)cdev->dev->map_base;
> > +
> > +     return readl(&jtag->control) & NIOS_JTAG_RRDY;
> > +}
> > +
> > +static int altera_serial_jtag_getc(struct console_device *cdev)
> > +{
> > +     struct nios_jtag *jtag = (struct nios_jtag *)cdev->dev->map_base;
> > +     uint32_t val;
> > +
> > +     while (1) {
> > +             val = readl(&jtag->data);
> > +             if (val & NIOS_JTAG_RVALID)
> > +                     break;
> > +     }
> > +
> > +     return val & 0xFF;
> > +}
> > +
> > +static int altera_serial_jtag_probe(struct device_d *dev) {
> > +
> > +     struct console_device *cdev;
> > +
> > +     cdev = malloc(sizeof(struct console_device));
> > +     dev->type_data = cdev;
> > +     cdev->dev = dev;
> > +     cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR;
> > +     cdev->tstc = altera_serial_jtag_tstc;
> > +     cdev->putc = altera_serial_jtag_putc;
> > +     cdev->getc = altera_serial_jtag_getc;
> > +     cdev->setbrg = altera_serial_jtag_setbaudrate;
> > +
> > +     console_register(cdev);
> > +
> > +     return 0;
> > +}
> > +
> > +static struct driver_d altera_serial_jtag_driver = {
> > +     .name = "altera_serial_jtag",
> > +     .probe = altera_serial_jtag_probe,
> > +};
> > +
> > +static int altera_serial_jtag_init(void)
> > +{
> > +     return register_driver(&altera_serial_jtag_driver);
> > +}
> > +
> > +console_initcall(altera_serial_jtag_init);
> > +
> > --
> > 1.7.0.4
> >
> >
> > _______________________________________________
> > barebox mailing list
> > barebox at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> >
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/barebox/attachments/20110606/44f5ed90/attachment-0001.html>


More information about the barebox mailing list