[PATCH] remove unused U-Boot header file include/ioports.h

[Antony Pavlov]

Signed-off-by: Antony Pavlov <antonynpavlov at gmail.com>
---
 include/ioports.h |   65 -----------------------------------------------------
 1 files changed, 0 insertions(+), 65 deletions(-)
 delete mode 100644 include/ioports.h

diff --git a/include/ioports.h b/include/ioports.h
deleted file mode 100644
index cfba667..0000000
--- a/include/ioports.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * definitions for MPC8260 I/O Ports
- *
- * (in addition to those provided in <asm/immap_8260.h>)
- *
- * Murray.Jensen at cmst.csiro.au, 20-Oct-00
- */
-
-/*
- * this structure mirrors the layout of the five port registers in
- * the internal memory map - see iop8260_t in <asm/immap_8260.h>
- */
-typedef struct {
-    unsigned int pdir;		/* Port Data Direction Register (35-3) */
-    unsigned int ppar;		/* Port Pin Assignment Register (35-4) */
-    unsigned int psor;		/* Port Special Options Register (35-5) */
-    unsigned int podr;		/* Port Open Drain Register (35-2) */
-    unsigned int pdat;		/* Port Data Register (35-3) */
-} ioport_t;
-
-/*
- * this macro calculates the address within the internal
- * memory map (im) of the set of registers for a port (idx)
- *
- * the internal memory map aligns the above structure on
- * a 0x20 byte boundary
- */
-#ifdef CONFIG_MPC85xx
-#define ioport_addr(im, idx) (ioport_t *)((uint)&((im)->im_cpm.im_cpm_iop) + ((idx)*0x20))
-#else
-#define ioport_addr(im, idx) (ioport_t *)((uint)&(im)->im_ioport + ((idx)*0x20))
-#endif
-
-/*
- * this structure provides configuration
- * information for one port pin
- */
-typedef struct {
-    unsigned char conf:1;	/* if 1, configure this port */
-    unsigned char ppar:1;	/* Port Pin Assignment Register (35-4) */
-    unsigned char psor:1;	/* Port Special Options Register (35-2) */
-    unsigned char pdir:1;	/* Port Data Direction Register (35-3) */
-    unsigned char podr:1;	/* Port Open Drain Register (35-2) */
-    unsigned char pdat:1;	/* Port Data Register (35-2) */
-} iop_conf_t;
-
-/*
- * a table that contains configuration information for all 32 pins
- * of all four MPC8260 I/O ports.
- *
- * NOTE: in the second dimension of this table, index 0 refers to pin 31
- * and index 31 refers to pin 0. this made the code in the table look more
- * like the table in the 8260UM (and in the hymod manuals).
- */
-extern const iop_conf_t iop_conf_tab[4][32];
-
-typedef struct {
-	unsigned char	port;
-	unsigned char	pin;
-	int		dir;
-	int		open_drain;
-	int		assign;
-} qe_iop_conf_t;
-
-#define QE_IOP_TAB_END	(-1)
-- 
1.7.5.4