[PATCH 04/12 v2] at91: switch to add_generic_device
Jean-Christophe PLAGNIOL-VILLARD
plagnioj at jcrosoft.com
Sun Jul 24 10:49:01 EDT 2011
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
arch/arm/boards/at91rm9200ek/init.c | 18 +--
arch/arm/boards/at91sam9263ek/init.c | 18 +---
arch/arm/boards/mmccpu/init.c | 17 +--
arch/arm/boards/pm9261/init.c | 11 +--
arch/arm/boards/pm9263/init.c | 18 +---
arch/arm/mach-at91/at91rm9200_devices.c | 144 ++++-----------------
arch/arm/mach-at91/at91sam9260_devices.c | 209 ++++++------------------------
arch/arm/mach-at91/at91sam9261_devices.c | 130 ++++---------------
arch/arm/mach-at91/at91sam9263_devices.c | 177 +++++--------------------
arch/arm/mach-at91/at91sam9g45_devices.c | 197 ++++++----------------------
10 files changed, 177 insertions(+), 762 deletions(-)
diff --git a/arch/arm/boards/at91rm9200ek/init.c b/arch/arm/boards/at91rm9200ek/init.c
index 2b16980..3ef41a2 100644
--- a/arch/arm/boards/at91rm9200ek/init.c
+++ b/arch/arm/boards/at91rm9200ek/init.c
@@ -34,20 +34,6 @@
#include <mach/gpio.h>
#include <mach/io.h>
-static struct resource cfi_resources[] = {
- [0] = {
- .start = AT91_CHIPSELECT_0,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d cfi_dev = {
- .id = 0,
- .name = "cfi_flash",
- .num_resources = ARRAY_SIZE(cfi_resources),
- .resource = cfi_resources,
-};
-
static struct at91_ether_platform_data ether_pdata = {
.flags = AT91SAM_ETHER_RMII,
.phy_addr = 0,
@@ -63,7 +49,9 @@ static int at91rm9200ek_devices_init(void)
at91_add_device_sdram(64 * 1024 * 1024);
at91_add_device_eth(ðer_pdata);
- register_device(&cfi_dev);
+
+ add_generic_device("cfi_flash", 0, NULL, AT91_CHIPSELECT_0, 0,
+ IORESOURCE_MEM, NULL);
#if defined(CONFIG_DRIVER_CFI) || defined(CONFIG_DRIVER_CFI_OLD)
devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self");
diff --git a/arch/arm/boards/at91sam9263ek/init.c b/arch/arm/boards/at91sam9263ek/init.c
index af8a1e1..655d46a 100644
--- a/arch/arm/boards/at91sam9263ek/init.c
+++ b/arch/arm/boards/at91sam9263ek/init.c
@@ -87,21 +87,6 @@ static void ek_add_device_nand(void)
at91_add_device_nand(&nand_pdata);
}
-static struct resource cfi_resources[] = {
- [0] = {
- .start = AT91_CHIPSELECT_0,
- .size = 8 * 1024 * 1024,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d cfi_dev = {
- .id = -1,
- .name = "cfi_flash",
- .num_resources = ARRAY_SIZE(cfi_resources),
- .resource = cfi_resources,
-};
-
static struct at91_ether_platform_data macb_pdata = {
.flags = AT91SAM_ETHER_RMII,
.phy_addr = 0,
@@ -135,7 +120,8 @@ static int at91sam9263ek_devices_init(void)
at91_add_device_sdram(64 * 1024 * 1024);
ek_add_device_nand();
at91_add_device_eth(&macb_pdata);
- register_device(&cfi_dev);
+ add_generic_device("cfi_flash", 0, NULL, AT91_CHIPSELECT_0, 8 * 1024 * 1024,
+ IORESOURCE_MEM, NULL);
ek_add_device_mci();
#if defined(CONFIG_DRIVER_CFI) || defined(CONFIG_DRIVER_CFI_OLD)
diff --git a/arch/arm/boards/mmccpu/init.c b/arch/arm/boards/mmccpu/init.c
index 8cc5f2c..85a18e0 100644
--- a/arch/arm/boards/mmccpu/init.c
+++ b/arch/arm/boards/mmccpu/init.c
@@ -37,20 +37,6 @@
#include <mach/gpio.h>
#include <mach/io.h>
-static struct resource cfi_resources[] = {
- [0] = {
- .start = AT91_CHIPSELECT_0,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d cfi_dev = {
- .id = -1,
- .name = "cfi_flash",
- .num_resources = ARRAY_SIZE(cfi_resources),
- .resource = cfi_resources,
-};
-
static struct at91_ether_platform_data macb_pdata = {
.flags = AT91SAM_ETHER_MII | AT91SAM_ETHER_FORCE_LINK,
.phy_addr = 4,
@@ -68,7 +54,8 @@ static int mmccpu_devices_init(void)
at91_add_device_sdram(128 * 1024 * 1024);
at91_add_device_eth(&macb_pdata);
- register_device(&cfi_dev);
+ add_generic_device("cfi_flash", 0, NULL, AT91_CHIPSELECT_0, 0,
+ IORESOURCE_MEM, NULL);
devfs_add_partition("nor0", 0x00000, 256 * 1024, PARTITION_FIXED, "self0");
devfs_add_partition("nor0", 0x40000, 128 * 1024, PARTITION_FIXED, "env0");
diff --git a/arch/arm/boards/pm9261/init.c b/arch/arm/boards/pm9261/init.c
index ad4fa9d..38e4350 100644
--- a/arch/arm/boards/pm9261/init.c
+++ b/arch/arm/boards/pm9261/init.c
@@ -147,19 +147,12 @@ static void __init pm_add_device_dm9000(void)
static void __init ek_add_device_dm9000(void) {}
#endif /* CONFIG_DRIVER_NET_DM9000 */
-static struct device_d cfi_dev = {
- .id = 0,
- .name = "cfi_flash",
- .map_base = AT91_CHIPSELECT_0,
- .size = 4 * 1024 * 1024,
-};
-
static int pm9261_devices_init(void)
{
at91_add_device_sdram(64 * 1024 * 1024);
pm_add_device_nand();
- register_device(&cfi_dev);
- pm_add_device_dm9000();
+ add_generic_device("cfi_flash", 0, NULL, AT91_CHIPSELECT_0, 4 * 1024 * 1024,
+ IORESOURCE_MEM, NULL);
devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self");
devfs_add_partition("nor0", 0x40000, 0x10000, PARTITION_FIXED, "env0");
diff --git a/arch/arm/boards/pm9263/init.c b/arch/arm/boards/pm9263/init.c
index e21e8e3..9f86d67 100644
--- a/arch/arm/boards/pm9263/init.c
+++ b/arch/arm/boards/pm9263/init.c
@@ -86,21 +86,6 @@ static void pm_add_device_nand(void)
at91_add_device_nand(&nand_pdata);
}
-static struct resource cfi_resources[] = {
- [0] = {
- .start = AT91_CHIPSELECT_0,
- .size = 4 * 1024 * 1024,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d cfi_dev = {
- .id = -1,
- .name = "cfi_flash",
- .num_resources = ARRAY_SIZE(cfi_resources),
- .resource = cfi_resources,
-};
-
static struct at91_ether_platform_data macb_pdata = {
.flags = AT91SAM_ETHER_RMII,
.phy_addr = 0,
@@ -119,7 +104,8 @@ static int pm9263_devices_init(void)
at91_add_device_sdram(64 * 1024 * 1024);
pm_add_device_nand();
at91_add_device_eth(&macb_pdata);
- register_device(&cfi_dev);
+ add_generic_device("cfi_flash", 0, NULL, AT91_CHIPSELECT_0, 4 * 1024 * 1024,
+ IORESOURCE_MEM, NULL);
devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self0");
devfs_add_partition("nor0", 0x40000, 0x10000, PARTITION_FIXED, "env0");
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 16c94a6..289f2c3 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -34,21 +34,6 @@ void at91_add_device_sdram(u32 size)
* -------------------------------------------------------------------- */
#if defined(CONFIG_DRIVER_NET_AT91_ETHER)
-static struct resource eth_resources[] = {
- [0] = {
- .start = AT91_VA_BASE_EMAC,
- .size = 0x1000,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d at91rm9200_eth_device = {
- .id = 0,
- .name = "at91_ether",
- .resource = eth_resources,
- .num_resources = ARRAY_SIZE(eth_resources),
-};
-
void __init at91_add_device_eth(struct at91_ether_platform_data *data)
{
if (!data)
@@ -77,8 +62,8 @@ void __init at91_add_device_eth(struct at91_ether_platform_data *data)
at91_set_B_periph(AT91_PIN_PB12, 0); /* ETX2 */
}
- at91rm9200_eth_device.platform_data = data;
- register_device(&at91rm9200_eth_device);
+ add_generic_device("at91_ether", 0, NULL, AT91_VA_BASE_EMAC, 0x1000,
+ IORESOURCE_MEM, data);
}
#else
void __init at91_add_device_eth(struct at91_ether_platform_data *data) {}
@@ -89,21 +74,6 @@ void __init at91_add_device_eth(struct at91_ether_platform_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_NAND_ATMEL)
-static struct resource nand_resources[] = {
- [0] = {
- .start = AT91_CHIPSELECT_3,
- .size = 0x10,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d at91rm9200_nand_device = {
- .id = -1,
- .name = "atmel_nand",
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
void __init at91_add_device_nand(struct atmel_nand_data *data)
{
unsigned int csa;
@@ -138,8 +108,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
at91_set_A_periph(AT91_PIN_PC1, 0); /* SMOE */
at91_set_A_periph(AT91_PIN_PC3, 0); /* SMWE */
- at91rm9200_nand_device.platform_data = data;
- platform_device_register(&at91rm9200_nand_device);
+ add_generic_device("atmel_nand", 0, NULL, AT91_CHIPSELECT_3, 0x10,
+ IORESOURCE_MEM, data);
}
#else
void __init at91_add_device_nand(struct atmel_nand_data *data) {}
@@ -149,42 +119,12 @@ void __init at91_add_device_nand(struct atmel_nand_data *data) {}
* UART
* -------------------------------------------------------------------- */
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91_BASE_SYS + AT91_DBGU,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d dbgu_serial_device = {
- .id = 0,
- .name = "atmel_serial",
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
static inline void configure_dbgu_pins(void)
{
at91_set_A_periph(AT91_PIN_PA30, 0); /* DRXD */
at91_set_A_periph(AT91_PIN_PA31, 1); /* DTXD */
}
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_US0,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart0_serial_device = {
- .id = 1,
- .name = "atmel_serial",
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */
@@ -202,21 +142,6 @@ static inline void configure_usart0_pins(unsigned pins)
}
}
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_US1,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart1_serial_device = {
- .id = 2,
- .name = "atmel_serial",
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */
@@ -236,21 +161,6 @@ static inline void configure_usart1_pins(unsigned pins)
at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
}
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_US2,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart2_serial_device = {
- .id = 3,
- .name = "atmel_serial",
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */
@@ -262,21 +172,6 @@ static inline void configure_usart2_pins(unsigned pins)
at91_set_B_periph(AT91_PIN_PA31, 0); /* RTS2 */
}
-static struct resource uart3_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_US3,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart3_serial_device = {
- .id = 4,
- .name = "atmel_serial",
- .resource = uart3_resources,
- .num_resources = ARRAY_SIZE(uart3_resources),
-};
-
static inline void configure_usart3_pins(unsigned pins)
{
at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */
@@ -290,33 +185,46 @@ static inline void configure_usart3_pins(unsigned pins)
void __init at91_register_uart(unsigned id, unsigned pins)
{
+ resource_size_t start;
+ struct device_d *dev;
+ char* clk_name;
+
switch (id) {
case 0: /* DBGU */
configure_dbgu_pins();
- at91_clock_associate("mck", &dbgu_serial_device, "usart");
- register_device(&dbgu_serial_device);
+ start = AT91_BASE_SYS + AT91_DBGU;
+ clk_name = "mck";
+ id = 0;
break;
case AT91RM9200_ID_US0:
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &uart0_serial_device, "usart");
+ clk_name = "usart0_clk";
+ start = AT91RM9200_BASE_US0;
+ id = 1;
break;
case AT91RM9200_ID_US1:
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &uart1_serial_device, "usart");
- register_device(&uart1_serial_device);
+ clk_name = "usart1_clk";
+ start = AT91RM9200_BASE_US1;
+ id = 2;
break;
case AT91RM9200_ID_US2:
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &uart2_serial_device, "usart");
- register_device(&uart2_serial_device);
+ clk_name = "usart2_clk";
+ start = AT91RM9200_BASE_US2;
+ id = 3;
break;
case AT91RM9200_ID_US3:
configure_usart3_pins(pins);
- at91_clock_associate("usart3_clk", &uart3_serial_device, "usart");
- register_device(&uart3_serial_device);
+ clk_name = "usart3_clk";
+ start = AT91RM9200_BASE_US3;
+ id = 4;
break;
default:
return;
}
+ dev = add_generic_device("atmel_serial", id, NULL, start, 4096,
+ IORESOURCE_MEM, NULL);
+ at91_clock_associate(clk_name, dev, "usart");
}
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 3808c66..468f00d 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -31,21 +31,6 @@ void at91_add_device_sdram(u32 size)
}
#if defined(CONFIG_DRIVER_NET_MACB)
-static struct resource eth_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_EMAC,
- .size = 0x1000,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d macb_dev = {
- .id = -1,
- .name = "macb",
- .resource = eth_resources,
- .num_resources = ARRAY_SIZE(eth_resources),
-};
-
void at91_add_device_eth(struct at91_ether_platform_data *data)
{
if (!data)
@@ -74,29 +59,14 @@ void at91_add_device_eth(struct at91_ether_platform_data *data)
at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */
}
- macb_dev.platform_data = data;
- register_device(&macb_dev);
+ add_generic_device("macb", 0, NULL, AT91SAM9260_BASE_EMAC, 0x1000,
+ IORESOURCE_MEM, data);
}
#else
void at91_add_device_eth(struct at91_ether_platform_data *data) {}
#endif
#if defined(CONFIG_NAND_ATMEL)
-static struct resource nand_resources[] = {
- [0] = {
- .start = AT91_CHIPSELECT_3,
- .size = 0x10,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d nand_dev = {
- .id = -1,
- .name = "atmel_nand",
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
void at91_add_device_nand(struct atmel_nand_data *data)
{
unsigned long csa;
@@ -119,49 +89,19 @@ void at91_add_device_nand(struct atmel_nand_data *data)
if (data->det_pin)
at91_set_gpio_input(data->det_pin, 1);
- nand_dev.platform_data = data;
- register_device(&nand_dev);
+ add_generic_device("atmel_nand", 0, NULL, AT91_CHIPSELECT_3, 0x10,
+ IORESOURCE_MEM, data);
}
#else
void at91_add_device_nand(struct atmel_nand_data *data) {}
#endif
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91_BASE_SYS + AT91_DBGU,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d dbgu_serial_device = {
- .id = 0,
- .name = "atmel_serial",
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
static inline void configure_dbgu_pins(void)
{
at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
}
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US0,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart0_serial_device = {
- .id = 1,
- .name = "atmel_serial",
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
@@ -181,21 +121,6 @@ static inline void configure_usart0_pins(unsigned pins)
at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
}
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US1,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart1_serial_device = {
- .id = 2,
- .name = "atmel_serial",
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
@@ -207,21 +132,6 @@ static inline void configure_usart1_pins(unsigned pins)
at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
}
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US2,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart2_serial_device = {
- .id = 3,
- .name = "atmel_serial",
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
@@ -233,21 +143,6 @@ static inline void configure_usart2_pins(unsigned pins)
at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */
}
-static struct resource uart3_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US3,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart3_serial_device = {
- .id = 4,
- .name = "atmel_serial",
- .resource = uart3_resources,
- .num_resources = ARRAY_SIZE(uart3_resources),
-};
-
static inline void configure_usart3_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */
@@ -259,42 +154,12 @@ static inline void configure_usart3_pins(unsigned pins)
at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */
}
-static struct resource uart4_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US4,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart4_serial_device = {
- .id = 5,
- .name = "atmel_serial",
- .resource = uart4_resources,
- .num_resources = ARRAY_SIZE(uart4_resources),
-};
-
static inline void configure_usart4_pins(void)
{
at91_set_B_periph(AT91_PIN_PA31, 1); /* TXD4 */
at91_set_B_periph(AT91_PIN_PA30, 0); /* RXD4 */
}
-static struct resource uart5_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US5,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart5_serial_device = {
- .id = 6,
- .name = "atmel_serial",
- .resource = uart5_resources,
- .num_resources = ARRAY_SIZE(uart5_resources),
-};
-
static inline void configure_usart5_pins(void)
{
at91_set_A_periph(AT91_PIN_PB12, 1); /* TXD5 */
@@ -303,66 +168,68 @@ static inline void configure_usart5_pins(void)
void at91_register_uart(unsigned id, unsigned pins)
{
+ resource_size_t start;
+ struct device_d *dev;
+ char* clk_name;
+
switch (id) {
case 0: /* DBGU */
configure_dbgu_pins();
- at91_clock_associate("mck", &dbgu_serial_device, "usart");
- register_device(&dbgu_serial_device);
+ start = AT91_BASE_SYS + AT91_DBGU;
+ clk_name = "mck";
+ id = 0;
break;
case AT91SAM9260_ID_US0:
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &uart0_serial_device, "usart");
- register_device(&uart0_serial_device);
+ clk_name = "usart0_clk";
+ start = AT91SAM9260_BASE_US0;
+ id = 1;
break;
case AT91SAM9260_ID_US1:
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &uart1_serial_device, "usart");
- register_device(&uart1_serial_device);
+ clk_name = "usart1_clk";
+ start = AT91SAM9260_BASE_US1;
+ id = 2;
break;
case AT91SAM9260_ID_US2:
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &uart2_serial_device, "usart");
- register_device(&uart2_serial_device);
+ clk_name = "usart2_clk";
+ start = AT91SAM9260_BASE_US2;
+ id = 3;
break;
case AT91SAM9260_ID_US3:
configure_usart3_pins(pins);
- at91_clock_associate("usart3_clk", &uart3_serial_device, "usart");
- register_device(&uart3_serial_device);
+ clk_name = "usart3_clk";
+ start = AT91SAM9260_BASE_US3;
+ id = 4;
break;
case AT91SAM9260_ID_US4:
configure_usart4_pins();
- at91_clock_associate("usart4_clk", &uart4_serial_device, "usart");
- register_device(&uart4_serial_device);
+ clk_name = "usart4_clk";
+ start = AT91SAM9260_BASE_US4;
+ id = 5;
break;
case AT91SAM9260_ID_US5:
configure_usart5_pins();
- at91_clock_associate("usart5_clk", &uart5_serial_device, "usart");
- register_device(&uart5_serial_device);
+ clk_name = "usart5_clk";
+ start = AT91SAM9260_BASE_US5;
+ id = 6;
break;
default:
return;
}
+
+ dev = add_generic_device("atmel_serial", id, NULL, start, 4096,
+ IORESOURCE_MEM, NULL);
+ at91_clock_associate(clk_name, dev, "usart");
}
#if defined(CONFIG_MCI_ATMEL)
-static struct resource mci_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_MCI,
- .size = SZ_16K,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d mci_device = {
- .id = -1,
- .name = "atmel_mci",
- .num_resources = ARRAY_SIZE(mci_resources),
- .resource = mci_resources,
-};
-
/* Consider only one slot : slot 0 */
void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
{
+ struct device_d *dev;
+
if (!data)
return;
@@ -393,9 +260,9 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
at91_set_A_periph(AT91_PIN_PA11, 1);
}
- mci_device.platform_data = data;
- at91_clock_associate("mci_clk", &mci_device, "mci_clk");
- register_device(&mci_device);
+ dev = add_generic_device("atmel_mci", 0, NULL, AT91SAM9260_BASE_MCI, SZ_16K,
+ IORESOURCE_MEM, data);
+ at91_clock_associate("mci_clk", dev, "mci_clk");
}
#else
void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index f2a0664..1e741fd 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -31,21 +31,6 @@ void at91_add_device_sdram(u32 size)
}
#if defined(CONFIG_NAND_ATMEL)
-static struct resource nand_resources[] = {
- [0] = {
- .start = AT91_CHIPSELECT_3,
- .size = 0x10,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d nand_dev = {
- .id = 0,
- .name = "atmel_nand",
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
void at91_add_device_nand(struct atmel_nand_data *data)
{
unsigned long csa;
@@ -71,49 +56,19 @@ void at91_add_device_nand(struct atmel_nand_data *data)
at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */
at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */
- nand_dev.platform_data = data;
- register_device(&nand_dev);
+ add_generic_device("atmel_nand", 0, NULL, AT91_CHIPSELECT_3, 0x10,
+ IORESOURCE_MEM, data);
}
#else
void at91_add_device_nand(struct atmel_nand_data *data) {}
#endif
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = (AT91_BASE_SYS + AT91_DBGU),
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d dbgu_serial_device = {
- .id = 0,
- .name = "atmel_serial",
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
static inline void configure_dbgu_pins(void)
{
at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */
at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */
}
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_US0,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart0_serial_device = {
- .id = 1,
- .name = "atmel_serial",
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
@@ -125,21 +80,6 @@ static inline void configure_usart0_pins(unsigned pins)
at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
}
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_US1,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart1_serial_device = {
- .id = 2,
- .name = "atmel_serial",
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
@@ -151,21 +91,6 @@ static inline void configure_usart1_pins(unsigned pins)
at91_set_B_periph(AT91_PIN_PA13, 0); /* CTS1 */
}
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_US2,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart2_serial_device = {
- .id = 3,
- .name = "atmel_serial",
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
@@ -179,51 +104,50 @@ static inline void configure_usart2_pins(unsigned pins)
void at91_register_uart(unsigned id, unsigned pins)
{
+ resource_size_t start;
+ struct device_d *dev;
+ char* clk_name;
+
switch (id) {
case 0: /* DBGU */
configure_dbgu_pins();
- at91_clock_associate("mck", &dbgu_serial_device, "usart");
- register_device(&dbgu_serial_device);
+ start = AT91_BASE_SYS + AT91_DBGU;
+ clk_name = "mck";
+ id = 0;
break;
case AT91SAM9261_ID_US0:
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &uart0_serial_device, "usart");
- register_device(&uart0_serial_device);
+ clk_name = "usart0_clk";
+ start = AT91SAM9261_BASE_US0;
+ id = 1;
break;
case AT91SAM9261_ID_US1:
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &uart1_serial_device, "usart");
- register_device(&uart1_serial_device);
+ clk_name = "usart1_clk";
+ start = AT91SAM9261_BASE_US1;
+ id = 2;
break;
case AT91SAM9261_ID_US2:
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &uart2_serial_device, "usart");
- register_device(&uart2_serial_device);
+ clk_name = "usart3_clk";
+ start = AT91SAM9261_BASE_US2;
+ id = 3;
break;
default:
return;
}
+
+ dev = add_generic_device("atmel_serial", id, NULL, start, 4096,
+ IORESOURCE_MEM, NULL);
+ at91_clock_associate(clk_name, dev, "usart");
}
#if defined(CONFIG_MCI_ATMEL)
-static struct resource mci_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_MCI,
- .size = SZ_16K,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d mci_device = {
- .id = -1,
- .name = "atmel_mci",
- .num_resources = ARRAY_SIZE(mci_resources),
- .resource = mci_resources,
-};
-
/* Consider only one slot : slot 0 */
void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
{
+ struct device_d *dev;
+
if (!data)
return;
@@ -254,9 +178,9 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
at91_set_B_periph(AT91_PIN_PA6, 1);
}
- mci_device.platform_data = data;
- at91_clock_associate("mci_clk", &mci_device, "mci_clk");
- register_device(&mci_device);
+ dev = add_generic_device("atmel_mci", 0, NULL, AT91SAM9261_BASE_MCI, SZ_16K,
+ IORESOURCE_MEM, data);
+ at91_clock_associate("mci_clk", dev, "mci_clk");
}
#else
void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index c951800..07bd02f 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -31,21 +31,6 @@ void at91_add_device_sdram(u32 size)
}
#if defined(CONFIG_DRIVER_NET_MACB)
-static struct resource eth_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_EMAC,
- .size = 0x1000,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d macb_dev = {
- .id = -1,
- .name = "macb",
- .resource = eth_resources,
- .num_resources = ARRAY_SIZE(eth_resources),
-};
-
void at91_add_device_eth(struct at91_ether_platform_data *data)
{
if (!data)
@@ -73,29 +58,14 @@ void at91_add_device_eth(struct at91_ether_platform_data *data)
at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
}
- macb_dev.platform_data = data;
- register_device(&macb_dev);
+ add_generic_device("macb", 0, NULL, AT91SAM9263_BASE_EMAC, 0x1000,
+ IORESOURCE_MEM, data);
}
#else
void at91_add_device_eth(struct at91_ether_platform_data *data) {}
#endif
#if defined(CONFIG_NAND_ATMEL)
-static struct resource nand_resources[] = {
- [0] = {
- .start = AT91_CHIPSELECT_3,
- .size = 0x10,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d nand_dev = {
- .id = -1,
- .name = "atmel_nand",
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
void at91_add_device_nand(struct atmel_nand_data *data)
{
unsigned long csa;
@@ -118,49 +88,19 @@ void at91_add_device_nand(struct atmel_nand_data *data)
if (data->det_pin)
at91_set_gpio_input(data->det_pin, 1);
- nand_dev.platform_data = data;
- register_device(&nand_dev);
+ add_generic_device("atmel_nand", -1, NULL, AT91_CHIPSELECT_3, 0x10,
+ IORESOURCE_MEM, data);
}
#else
void at91_add_device_nand(struct atmel_nand_data *data) {}
#endif
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = (AT91_BASE_SYS + AT91_DBGU),
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d dbgu_serial_device = {
- .id = 0,
- .name = "atmel_serial",
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
static inline void configure_dbgu_pins(void)
{
at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
}
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_US0,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart0_serial_device = {
- .id = 1,
- .name = "atmel_serial",
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
@@ -172,21 +112,6 @@ static inline void configure_usart0_pins(unsigned pins)
at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
}
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_US1,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart1_serial_device = {
- .id = 2,
- .name = "atmel_serial",
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
@@ -198,21 +123,6 @@ static inline void configure_usart1_pins(unsigned pins)
at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
}
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_US2,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart2_serial_device = {
- .id = 3,
- .name = "atmel_serial",
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
@@ -226,67 +136,53 @@ static inline void configure_usart2_pins(unsigned pins)
void at91_register_uart(unsigned id, unsigned pins)
{
+ resource_size_t start;
+ struct device_d *dev;
+ char* clk_name;
+
switch (id) {
case 0: /* DBGU */
configure_dbgu_pins();
- at91_clock_associate("mck", &dbgu_serial_device, "usart");
- register_device(&dbgu_serial_device);
+ start = AT91_BASE_SYS + AT91_DBGU;
+ clk_name = "mck";
+ id = 0;
break;
case AT91SAM9263_ID_US0:
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &uart0_serial_device, "usart");
- register_device(&uart0_serial_device);
+ clk_name = "usart0_clk";
+ start = AT91SAM9263_BASE_US0;
+ id = 1;
break;
case AT91SAM9263_ID_US1:
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &uart1_serial_device, "usart");
- register_device(&uart1_serial_device);
+ clk_name = "usart1_clk";
+ start = AT91SAM9263_BASE_US1;
+ id = 2;
break;
case AT91SAM9263_ID_US2:
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &uart2_serial_device, "usart");
- register_device(&uart2_serial_device);
+ clk_name = "usart2_clk";
+ start = AT91SAM9263_BASE_US2;
+ id = 3;
break;
default:
return;
}
+ dev = add_generic_device("atmel_serial", id, NULL, start, 4096,
+ IORESOURCE_MEM, NULL);
+ at91_clock_associate(clk_name, dev, "usart");
+
}
#if defined(CONFIG_MCI_ATMEL)
-static struct resource mci0_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_MCI0,
- .size = SZ_16K,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d mci0_device = {
- .id = 0,
- .name = "atmel_mci",
- .num_resources = ARRAY_SIZE(mci0_resources),
- .resource = mci0_resources,
-};
-
-static struct resource mci1_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_MCI1,
- .size = SZ_16K,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d mci1_device = {
- .id = 1,
- .name = "atmel_mci",
- .num_resources = ARRAY_SIZE(mci1_resources),
- .resource = mci1_resources,
-};
-
/* Consider only one slot : slot 0 */
void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
{
+ resource_size_t start;
+ struct device_d *dev;
+ char* clk_name;
+
if (!data)
return;
@@ -304,6 +200,8 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
at91_set_gpio_input(data->wp_pin, 1);
if (mmc_id == 0) { /* MCI0 */
+ start = AT91SAM9263_BASE_MCI0;
+ clk_name = "mci0_clk";
/* CLK */
at91_set_A_periph(AT91_PIN_PA12, 0);
@@ -317,12 +215,9 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
at91_set_A_periph(AT91_PIN_PA4, 1);
at91_set_A_periph(AT91_PIN_PA5, 1);
}
-
- mci0_device.platform_data = data;
- at91_clock_associate("mci0_clk", &mci0_device, "mci_clk");
- register_device(&mci0_device);
-
} else { /* MCI1 */
+ start = AT91SAM9263_BASE_MCI1;
+ clk_name = "mci1_clk";
/* CLK */
at91_set_A_periph(AT91_PIN_PA6, 0);
@@ -336,11 +231,11 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
at91_set_A_periph(AT91_PIN_PA10, 1);
at91_set_A_periph(AT91_PIN_PA11, 1);
}
-
- mci1_device.platform_data = data;
- at91_clock_associate("mci1_clk", &mci1_device, "mci_clk");
- register_device(&mci1_device);
}
+
+ dev = add_generic_device("atmel_mci", mmc_id, NULL, start, 4096,
+ IORESOURCE_MEM, data);
+ at91_clock_associate(clk_name, dev, "mci_clk");
}
#else
void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 4f5279f..4d55e22 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -31,21 +31,6 @@ void at91_add_device_sdram(u32 size)
}
#if defined(CONFIG_DRIVER_NET_MACB)
-static struct resource eth_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_EMAC,
- .size = 0x1000,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d macb_dev = {
- .id = 0,
- .name = "macb",
- .resource = eth_resources,
- .num_resources = ARRAY_SIZE(eth_resources),
-};
-
void at91_add_device_eth(struct at91_ether_platform_data *data)
{
if (!data)
@@ -74,29 +59,14 @@ void at91_add_device_eth(struct at91_ether_platform_data *data)
at91_set_B_periph(AT91_PIN_PA27, 0); /* ETXER */
}
- macb_dev.platform_data = data;
- register_device(&macb_dev);
+ add_generic_device("macb", 0, NULL, AT91SAM9G45_BASE_EMAC, 0x1000,
+ IORESOURCE_MEM, data);
}
#else
void at91_add_device_eth(struct at91_ether_platform_data *data) {}
#endif
#if defined(CONFIG_NAND_ATMEL)
-static struct resource nand_resources[] = {
- [0] = {
- .start = AT91_CHIPSELECT_3,
- .size = 0x10,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d nand_dev = {
- .id = -1,
- .name = "atmel_nand",
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
void at91_add_device_nand(struct atmel_nand_data *data)
{
unsigned long csa;
@@ -122,49 +92,19 @@ void at91_add_device_nand(struct atmel_nand_data *data)
if (data->det_pin)
at91_set_gpio_input(data->det_pin, 1);
- nand_dev.platform_data = data;
- register_device(&nand_dev);
+ add_generic_device("atmel_nand", -1, NULL, AT91_CHIPSELECT_3, 0x10,
+ IORESOURCE_MEM, data);
}
#else
void at91_add_device_nand(struct atmel_nand_data *data) {}
#endif
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = (AT91_BASE_SYS + AT91_DBGU),
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d dbgu_serial_device = {
- .id = -1,
- .name = "atmel_serial",
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
static inline void configure_dbgu_pins(void)
{
at91_set_A_periph(AT91_PIN_PB12, 0); /* DRXD */
at91_set_A_periph(AT91_PIN_PB13, 1); /* DTXD */
}
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_US0,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart0_serial_device = {
- .id = -1,
- .name = "atmel_serial",
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB19, 1); /* TXD0 */
@@ -176,21 +116,6 @@ static inline void configure_usart0_pins(unsigned pins)
at91_set_B_periph(AT91_PIN_PB15, 0); /* CTS0 */
}
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_US1,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart1_serial_device = {
- .id = -1,
- .name = "atmel_serial",
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD1 */
@@ -202,21 +127,6 @@ static inline void configure_usart1_pins(unsigned pins)
at91_set_A_periph(AT91_PIN_PD17, 0); /* CTS1 */
}
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_US2,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart2_serial_device = {
- .id = -1,
- .name = "atmel_serial",
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD2 */
@@ -228,21 +138,6 @@ static inline void configure_usart2_pins(unsigned pins)
at91_set_B_periph(AT91_PIN_PC11, 0); /* CTS2 */
}
-static struct resource uart3_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_US3,
- .size = 4096,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d uart3_serial_device = {
- .id = -1,
- .name = "atmel_serial",
- .resource = uart3_resources,
- .num_resources = ARRAY_SIZE(uart3_resources),
-};
-
static inline void configure_usart3_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD3 */
@@ -256,72 +151,59 @@ static inline void configure_usart3_pins(unsigned pins)
void at91_register_uart(unsigned id, unsigned pins)
{
+ resource_size_t start;
+ struct device_d *dev;
+ char* clk_name;
+
switch (id) {
case 0: /* DBGU */
configure_dbgu_pins();
- at91_clock_associate("mck", &dbgu_serial_device, "usart");
- register_device(&dbgu_serial_device);
+ start = AT91_BASE_SYS + AT91_DBGU;
+ clk_name = "mck";
+ id = 0;
break;
case AT91SAM9G45_ID_US0:
configure_usart0_pins(pins);
- at91_clock_associate("usart0_clk", &uart0_serial_device, "usart");
- register_device(&uart0_serial_device);
+ clk_name = "usart0_clk";
+ start = AT91SAM9G45_BASE_US0;
+ id = 1;
break;
case AT91SAM9G45_ID_US1:
configure_usart1_pins(pins);
- at91_clock_associate("usart1_clk", &uart1_serial_device, "usart");
- register_device(&uart1_serial_device);
+ clk_name = "usart1_clk";
+ start = AT91SAM9G45_BASE_US1;
+ id = 2;
break;
case AT91SAM9G45_ID_US2:
configure_usart2_pins(pins);
- at91_clock_associate("usart2_clk", &uart2_serial_device, "usart");
- register_device(&uart2_serial_device);
+ clk_name = "usart2_clk";
+ start = AT91SAM9G45_BASE_US2;
+ id = 3;
break;
case AT91SAM9G45_ID_US3:
configure_usart3_pins(pins);
- at91_clock_associate("usart3_clk", &uart2_serial_device, "usart");
- register_device(&uart3_serial_device);
+ clk_name = "usart3_clk";
+ start = AT91SAM9G45_BASE_US3;
+ id = 4;
break;
default:
return;
}
+ dev = add_generic_device("atmel_serial", id, NULL, start, 4096,
+ IORESOURCE_MEM, NULL);
+ at91_clock_associate(clk_name, dev, "usart");
+
}
#if defined(CONFIG_MCI_ATMEL)
-static struct resource mci0_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_MCI0,
- .size = SZ_16K,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d mci0_device = {
- .id = 0,
- .name = "atmel_mci",
- .num_resources = ARRAY_SIZE(mci0_resources),
- .resource = mci0_resources,
-};
-
-static struct resource mci1_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_MCI1,
- .size = SZ_16K,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct device_d mci1_device = {
- .id = 1,
- .name = "atmel_mci",
- .num_resources = ARRAY_SIZE(mci1_resources),
- .resource = mci1_resources,
-};
-
/* Consider only one slot : slot 0 */
void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
{
+ resource_size_t start;
+ struct device_d *dev;
+ char* clk_name;
+
if (!data)
return;
@@ -339,6 +221,8 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
at91_set_gpio_input(data->wp_pin, 1);
if (mmc_id == 0) { /* MCI0 */
+ start = AT91SAM9G45_BASE_MCI0;
+ clk_name = "mci0_clk";
/* CLK */
at91_set_A_periph(AT91_PIN_PA0, 0);
@@ -358,12 +242,9 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
at91_set_A_periph(AT91_PIN_PA9, 1);
}
}
-
- mci0_device.platform_data = data;
- at91_clock_associate("mci0_clk", &mci0_device, "mci_clk");
- register_device(&mci0_device);
-
} else { /* MCI1 */
+ start = AT91SAM9G45_BASE_MCI1;
+ clk_name = "mci1_clk";
/* CLK */
at91_set_A_periph(AT91_PIN_PA31, 0);
@@ -383,11 +264,11 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
at91_set_A_periph(AT91_PIN_PA30, 1);
}
}
-
- mci1_device.platform_data = data;
- at91_clock_associate("mci1_clk", &mci1_device, "mci_clk");
- register_device(&mci1_device);
}
+
+ dev = add_generic_device("atmel_mci", mmc_id, NULL, start, 4096,
+ IORESOURCE_MEM, data);
+ at91_clock_associate(clk_name, dev, "mci_clk");
}
#else
void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
--
1.7.5.4
More information about the barebox
mailing list