[PATCH 08/10] fb i.MX23/28: rename imx_fb_videomode to imx_fb_platformdata
Sascha Hauer
s.hauer at pengutronix.de
Thu Jan 20 04:46:59 EST 2011
It's not a video mode, it contains video modes, so rename
the struct to what it actually is.
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
arch/arm/boards/chumby_falconwing/falconwing.c | 2 +-
arch/arm/mach-stm/include/mach/fb.h | 2 +-
drivers/video/stm.c | 12 ++++++------
3 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boards/chumby_falconwing/falconwing.c b/arch/arm/boards/chumby_falconwing/falconwing.c
index 0979630..d46431c 100644
--- a/arch/arm/boards/chumby_falconwing/falconwing.c
+++ b/arch/arm/boards/chumby_falconwing/falconwing.c
@@ -98,7 +98,7 @@ static struct fb_videomode falconwing_vmode = {
.flag = 0,
};
-static struct imx_fb_videomode fb_mode = {
+static struct imx_fb_platformdata fb_mode = {
.mode_list = &falconwing_vmode,
.mode_cnt = 1,
/* the NMA35 is a 24 bit display, but only 18 bits are connected */
diff --git a/arch/arm/mach-stm/include/mach/fb.h b/arch/arm/mach-stm/include/mach/fb.h
index 3c53f1a..5346306 100644
--- a/arch/arm/mach-stm/include/mach/fb.h
+++ b/arch/arm/mach-stm/include/mach/fb.h
@@ -31,7 +31,7 @@
/** swap RGB to BGR */
#define FB_SYNC_SWAP_RGB (1 << 31)
-struct imx_fb_videomode {
+struct imx_fb_platformdata {
struct fb_videomode *mode_list;
unsigned mode_cnt;
diff --git a/drivers/video/stm.c b/drivers/video/stm.c
index 8d6361e..83c39c8 100644
--- a/drivers/video/stm.c
+++ b/drivers/video/stm.c
@@ -142,7 +142,7 @@ struct imxfb_info {
unsigned memory_size;
struct fb_info info;
struct device_d *hw_dev;
- struct imx_fb_videomode *pdata;
+ struct imx_fb_platformdata *pdata;
};
/* the RGB565 true colour mode */
@@ -293,7 +293,7 @@ static void stmfb_disable_controller(struct fb_info *fb_info)
static int stmfb_activate_var(struct fb_info *fb_info)
{
struct imxfb_info *fbi = fb_info->priv;
- struct imx_fb_videomode *pdata = fbi->pdata;
+ struct imx_fb_platformdata *pdata = fbi->pdata;
struct fb_videomode *mode = fb_info->mode;
uint32_t reg;
unsigned size;
@@ -442,7 +442,7 @@ static int stmfb_activate_var(struct fb_info *fb_info)
static void stmfb_info(struct device_d *hw_dev)
{
- struct imx_fb_videomode *pdata = hw_dev->platform_data;
+ struct imx_fb_platformdata *pdata = hw_dev->platform_data;
unsigned u;
printf(" Supported video modes:\n");
@@ -469,7 +469,7 @@ static struct imxfb_info fbi = {
static int stmfb_probe(struct device_d *hw_dev)
{
- struct imx_fb_videomode *pdata = hw_dev->platform_data;
+ struct imx_fb_platformdata *pdata = hw_dev->platform_data;
int ret;
/* just init */
@@ -524,8 +524,8 @@ device_initcall(stmfb_init);
* (platform specific).
*
* For the developer: Don't forget to set the data bus width to the display
- * in the imx_fb_videomode structure. You will else end up with ugly colours.
+ * in the imx_fb_platformdata structure. You will else end up with ugly colours.
* If you fight against jitter you can vary the clock delay. This is a feature
* of the i.MX28 and you can vary it between 2 ns ... 8 ns in 2 ns steps. Give
- * the required value in the imx_fb_videomode structure.
+ * the required value in the imx_fb_platformdata structure.
*/
--
1.7.2.3
More information about the barebox
mailing list