[PATCH] at91sam9m10g45ek: add board revision support
Sascha Hauer
s.hauer at pengutronix.de
Sat Jan 15 11:21:34 EST 2011
On Sat, Jan 15, 2011 at 04:50:35PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > > diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> > > index e5bd45e..4d35ebe 100644
> > > --- a/arch/arm/mach-at91/Kconfig
> > > +++ b/arch/arm/mach-at91/Kconfig
> > > @@ -174,7 +174,8 @@ config MACH_AT91SAM9M10G45EK
> > > bool "Atmel AT91SAM9M10G45-EK Evaluation Kit"
> > > select HAVE_NAND_ATMEL_BUSWIDTH_16
> > > help
> > > - Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
> > > + Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit
> > > + or AT91SAM9G45-EKES or AT91SAM9M10-EKES (for those 2 select the LG LCD)
> > > <http://atmel.com/dyn/products/tools_card_v2.asp?tool_id=4735>
> >
> > Isn't it better to let the user choose the exact board type here and
> > select the display type automatically depending on the choice?
> They are nearly the same board and the idea is to allow to specify the lcd as
> we can change it and it's the only difference between the 3 boards,
Ok, fine. Note I didn't want to suggest a complete new board support,
only the Kconfig option. The user likely knows better which board he has
than what exact display is connected to it.
Can you then add a help text to the display choice? Something like:
+choice
+ prompt "LCD type"
+ depends on MACH_AT91SAM9M10G45EK
+
+config LCD_TRULY_TFT1N4633E
+ bool "truly TFT1N4633E"
+ help
+ Found on AT91SAM9M10G45-EK
+
+config LCD_LG_LB043WQ1
+ bool "LG philips LB043WQ1"
+ help
+ Found on AT91SAM9G45-EKES and AT91SAM9M10-EKES
+
+endchoice
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list