[PATCH 07/24] add to speed
Sascha Hauer
s.hauer at pengutronix.de
Fri Jan 7 05:43:47 EST 2011
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
arch/arm/mach-imx/speed-imx1.c | 20 ++++++++++----------
arch/arm/mach-imx/speed-imx21.c | 20 ++++++++++----------
arch/arm/mach-imx/speed-imx25.c | 20 ++++++++++----------
arch/arm/mach-imx/speed-imx31.c | 4 ++--
arch/arm/mach-imx/speed-imx35.c | 18 +++++++++---------
5 files changed, 41 insertions(+), 41 deletions(-)
diff --git a/arch/arm/mach-imx/speed-imx1.c b/arch/arm/mach-imx/speed-imx1.c
index a4b4f96..6fd549f 100644
--- a/arch/arm/mach-imx/speed-imx1.c
+++ b/arch/arm/mach-imx/speed-imx1.c
@@ -81,15 +81,15 @@ ulong imx_get_gptclk(void)
void imx_dump_clocks(void)
{
- printf("spll: %10d Hz\n", imx_get_spllclk());
- printf("mpll: %10d Hz\n", imx_get_mpllclk());
- printf("fclk: %10d Hz\n", imx_get_fclk());
- printf("hclk: %10d Hz\n", imx_get_hclk());
- printf("bclk: %10d Hz\n", imx_get_bclk());
- printf("perclk1: %10d Hz\n", imx_get_perclk1());
- printf("perclk2: %10d Hz\n", imx_get_perclk2());
- printf("perclk3: %10d Hz\n", imx_get_perclk3());
- printf("uart: %10d Hz\n", imx_get_uartclk());
- printf("gpt: %10d Hz\n", imx_get_gptclk());
+ printf("spll: %10ld Hz\n", imx_get_spllclk());
+ printf("mpll: %10ld Hz\n", imx_get_mpllclk());
+ printf("fclk: %10ld Hz\n", imx_get_fclk());
+ printf("hclk: %10ld Hz\n", imx_get_hclk());
+ printf("bclk: %10ld Hz\n", imx_get_bclk());
+ printf("perclk1: %10ld Hz\n", imx_get_perclk1());
+ printf("perclk2: %10ld Hz\n", imx_get_perclk2());
+ printf("perclk3: %10ld Hz\n", imx_get_perclk3());
+ printf("uart: %10ld Hz\n", imx_get_uartclk());
+ printf("gpt: %10ld Hz\n", imx_get_gptclk());
}
diff --git a/arch/arm/mach-imx/speed-imx21.c b/arch/arm/mach-imx/speed-imx21.c
index 9ae8026..6ab1dca 100644
--- a/arch/arm/mach-imx/speed-imx21.c
+++ b/arch/arm/mach-imx/speed-imx21.c
@@ -145,16 +145,16 @@ void imx_dump_clocks(void)
uint32_t cid = CID;
printf("chip id: [%08x]\n", cid);
- printf("mpll: %10d Hz\n", imx_get_mpllclk());
- printf("spll: %10d Hz\n", imx_get_spllclk());
- printf("arm: %10d Hz\n", imx_get_armclk());
- printf("fclk: %10d Hz\n", imx_get_fclk());
- printf("nfcclk: %10d Hz\n", imx_get_nfcclk());
- printf("perclk1: %10d Hz\n", imx_get_perclk1());
- printf("perclk2: %10d Hz\n", imx_get_perclk2());
- printf("perclk3: %10d Hz\n", imx_get_perclk3());
- printf("perclk4: %10d Hz\n", imx_get_perclk4());
- printf("clkin26: %10d Hz\n", clk_in_26m());
+ printf("mpll: %10ld Hz\n", imx_get_mpllclk());
+ printf("spll: %10ld Hz\n", imx_get_spllclk());
+ printf("arm: %10ld Hz\n", imx_get_armclk());
+ printf("fclk: %10ld Hz\n", imx_get_fclk());
+ printf("nfcclk: %10ld Hz\n", imx_get_nfcclk());
+ printf("perclk1: %10ld Hz\n", imx_get_perclk1());
+ printf("perclk2: %10ld Hz\n", imx_get_perclk2());
+ printf("perclk3: %10ld Hz\n", imx_get_perclk3());
+ printf("perclk4: %10ld Hz\n", imx_get_perclk4());
+ printf("clkin26: %10ld Hz\n", clk_in_26m());
}
/*
diff --git a/arch/arm/mach-imx/speed-imx25.c b/arch/arm/mach-imx/speed-imx25.c
index cb28e9f..68b50e9 100644
--- a/arch/arm/mach-imx/speed-imx25.c
+++ b/arch/arm/mach-imx/speed-imx25.c
@@ -89,16 +89,16 @@ unsigned long imx_get_mmcclk(void)
void imx_dump_clocks(void)
{
- printf("mpll: %10d Hz\n", imx_get_mpllclk());
- printf("upll: %10d Hz\n", imx_get_upllclk());
- printf("arm: %10d Hz\n", imx_get_armclk());
- printf("ahb: %10d Hz\n", imx_get_ahbclk());
- printf("uart: %10d Hz\n", imx_get_perclk(15));
- printf("gpt: %10d Hz\n", imx_get_ipgclk());
- printf("nand: %10d Hz\n", imx_get_perclk(8));
- printf("lcd: %10d Hz\n", imx_get_perclk(7));
- printf("i2c: %10d Hz\n", imx_get_perclk(6));
- printf("sdhc1: %10d Hz\n", imx_get_perclk(3));
+ printf("mpll: %10ld Hz\n", imx_get_mpllclk());
+ printf("upll: %10ld Hz\n", imx_get_upllclk());
+ printf("arm: %10ld Hz\n", imx_get_armclk());
+ printf("ahb: %10ld Hz\n", imx_get_ahbclk());
+ printf("uart: %10ld Hz\n", imx_get_perclk(15));
+ printf("gpt: %10ld Hz\n", imx_get_ipgclk());
+ printf("nand: %10ld Hz\n", imx_get_perclk(8));
+ printf("lcd: %10ld Hz\n", imx_get_perclk(7));
+ printf("i2c: %10ld Hz\n", imx_get_perclk(6));
+ printf("sdhc1: %10ld Hz\n", imx_get_perclk(3));
}
/*
diff --git a/arch/arm/mach-imx/speed-imx31.c b/arch/arm/mach-imx/speed-imx31.c
index 70b1330..32a517d 100644
--- a/arch/arm/mach-imx/speed-imx31.c
+++ b/arch/arm/mach-imx/speed-imx31.c
@@ -67,8 +67,8 @@ ulong imx_get_perclk1(void)
void imx_dump_clocks(void)
{
ulong cpufreq = imx_get_mcu_main_clk();
- printf("mx31 cpu clock: %dMHz\n",cpufreq / 1000000);
- printf("ipg clock : %dHz\n", imx_get_perclk1());
+ printf("mx31 cpu clock: %ldMHz\n",cpufreq / 1000000);
+ printf("ipg clock : %ldHz\n", imx_get_perclk1());
}
ulong imx_get_uartclk(void)
diff --git a/arch/arm/mach-imx/speed-imx35.c b/arch/arm/mach-imx/speed-imx35.c
index 8937ef1..b2a339c 100644
--- a/arch/arm/mach-imx/speed-imx35.c
+++ b/arch/arm/mach-imx/speed-imx35.c
@@ -187,15 +187,15 @@ ulong imx_get_i2cclk(void)
void imx_dump_clocks(void)
{
- printf("mpll: %10d Hz\n", imx_get_mpllclk());
- printf("ppll: %10d Hz\n", imx_get_ppllclk());
- printf("arm: %10d Hz\n", imx_get_armclk());
- printf("gpt: %10d Hz\n", imx_get_gptclk());
- printf("ahb: %10d Hz\n", imx_get_ahbclk());
- printf("ipg: %10d Hz\n", imx_get_ipgclk());
- printf("ipg_per: %10d Hz\n", imx_get_ipg_perclk());
- printf("uart: %10d Hz\n", imx_get_uartclk());
- printf("sdhc1: %10d Hz\n", imx_get_mmcclk());
+ printf("mpll: %10ld Hz\n", imx_get_mpllclk());
+ printf("ppll: %10ld Hz\n", imx_get_ppllclk());
+ printf("arm: %10ld Hz\n", imx_get_armclk());
+ printf("gpt: %10ld Hz\n", imx_get_gptclk());
+ printf("ahb: %10ld Hz\n", imx_get_ahbclk());
+ printf("ipg: %10ld Hz\n", imx_get_ipgclk());
+ printf("ipg_per: %10ld Hz\n", imx_get_ipg_perclk());
+ printf("uart: %10ld Hz\n", imx_get_uartclk());
+ printf("sdhc1: %10ld Hz\n", imx_get_mmcclk());
}
/*
--
1.7.2.3
More information about the barebox
mailing list