[PATCH 2/6] at91: add Ronetix pm9261 board support
Sascha Hauer
s.hauer at pengutronix.de
Wed Nov 10 10:02:02 EST 2010
On Wed, Nov 10, 2010 at 12:44:56PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
> Cc: Ilko Iliev <iliev at ronetix.at>
> ---
> arch/arm/Makefile | 1 +
> arch/arm/boards/pm9261/Makefile | 1 +
> arch/arm/boards/pm9261/config.h | 110 ++++++++++++++++++++++++
> arch/arm/boards/pm9261/env/config | 41 +++++++++
> arch/arm/boards/pm9261/init.c | 168 +++++++++++++++++++++++++++++++++++++
> arch/arm/configs/pm9261_defconfig | 52 +++++++++++
> arch/arm/mach-at91/Kconfig | 8 ++
> 7 files changed, 381 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/boards/pm9261/Makefile
> create mode 100644 arch/arm/boards/pm9261/config.h
> create mode 100644 arch/arm/boards/pm9261/env/config
> create mode 100644 arch/arm/boards/pm9261/init.c
> create mode 100644 arch/arm/configs/pm9261_defconfig
>
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index a2ef430..80c5561 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -79,6 +79,7 @@ board-$(CONFIG_MACH_PCA100) := phycard-i.MX27
> board-$(CONFIG_MACH_PCM037) := pcm037
> board-$(CONFIG_MACH_PCM038) := pcm038
> board-$(CONFIG_MACH_PCM043) := pcm043
> +board-$(CONFIG_MACH_PM9261) := pm9261
> board-$(CONFIG_MACH_PM9263) := pm9263
> board-$(CONFIG_MACH_SCB9328) := scb9328
> board-$(CONFIG_MACH_NESO) := guf-neso
> diff --git a/arch/arm/boards/pm9261/Makefile b/arch/arm/boards/pm9261/Makefile
> new file mode 100644
> index 0000000..eb072c0
> --- /dev/null
> +++ b/arch/arm/boards/pm9261/Makefile
> @@ -0,0 +1 @@
> +obj-y += init.o
> diff --git a/arch/arm/boards/pm9261/config.h b/arch/arm/boards/pm9261/config.h
> new file mode 100644
> index 0000000..1c57448
> --- /dev/null
> +++ b/arch/arm/boards/pm9261/config.h
> @@ -0,0 +1,110 @@
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#define AT91_MAIN_CLOCK 18432000 /* 16.367 MHz crystal */
Better no comment than a wrong one.
> +
> +#define MASTER_PLL_DIV 15
> +#define MASTER_PLL_MUL 162
> +#define MAIN_PLL_DIV 2
> +
> +/* clocks */
> +#define CONFIG_SYS_MOR_VAL \
> + (AT91_PMC_MOSCEN | \
> + (255 << 8)) /* Main Oscillator Start-up Time */
> +#define CONFIG_SYS_PLLAR_VAL \
> + (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
> + AT91_PMC_OUT | \
> + ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
> +
> +/* PCK/2 = MCK Master Clock from PLLA */
> +#define CONFIG_SYS_MCKR1_VAL \
> + (AT91_PMC_CSS_SLOW | \
> + AT91_PMC_PRES_1 | \
> + AT91SAM9_PMC_MDIV_2 | \
> + AT91_PMC_PDIV_1)
> +
> +/* PCK/2 = MCK Master Clock from PLLA */
> +#define CONFIG_SYS_MCKR2_VAL \
> + (AT91_PMC_CSS_PLLA | \
> + AT91_PMC_PRES_1 | \
> + AT91SAM9_PMC_MDIV_2 | \
> + AT91_PMC_PDIV_1)
> +
> +/* define PDC[31:16] as DATA[31:16] */
> +#define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000
> +/* no pull-up for D[31:16] */
> +#define CONFIG_SYS_PIOC_PPUDR_VAL 0xFFFF0000
> +
> +/* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */
> +#define CONFIG_SYS_MATRIX_EBICSA_VAL \
> + (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC)
> +
> +/* SDRAM */
> +/* SDRAMC_MR Mode register */
> +#define CONFIG_SYS_SDRC_MR_VAL1 AT91_SDRAMC_MODE_NORMAL
> +/* SDRAMC_TR - Refresh Timer register */
> +#define CONFIG_SYS_SDRC_TR_VAL1 0x13C
> +/* SDRAMC_CR - Configuration register*/
> +#define CONFIG_SYS_SDRC_CR_VAL \
> + (AT91_SDRAMC_NC_9 | \
> + AT91_SDRAMC_NR_13 | \
> + AT91_SDRAMC_NB_4 | \
> + AT91_SDRAMC_CAS_3 | \
> + AT91_SDRAMC_DBW_32 | \
> + (1 << 8) | /* Write Recovery Delay */ \
> + (7 << 12) | /* Row Cycle Delay */ \
> + (3 << 16) | /* Row Precharge Delay */ \
> + (2 << 20) | /* Row to Column Delay */ \
> + (5 << 24) | /* Active to Precharge Delay */ \
> + (1 << 28)) /* Exit Self Refresh to Active Delay */
> +
> +/* Memory Device Register -> SDRAM */
> +#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM
> +#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE
> +#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */
> +#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH
> +#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */
> +#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */
> +#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */
> +#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */
> +#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */
> +#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */
> +#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */
> +#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */
> +#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR
> +#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */
> +#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL
> +#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */
> +#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */
> +#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */
> +
> +/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
> +#define CONFIG_SYS_SMC0_SETUP0_VAL \
> + (AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | \
> + AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
> +#define CONFIG_SYS_SMC0_PULSE0_VAL \
> + (AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | \
> + AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
> +#define CONFIG_SYS_SMC0_CYCLE0_VAL \
> + (AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
> +#define CONFIG_SYS_SMC0_MODE0_VAL \
> + (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \
> + AT91_SMC_DBW_16 | \
> + AT91_SMC_TDFMODE | \
> + AT91_SMC_TDF_(6))
> +
> +/* user reset enable */
> +#define CONFIG_SYS_RSTC_RMR_VAL \
> + (AT91_RSTC_KEY | \
> + AT91_RSTC_PROCRST | \
> + AT91_RSTC_RSTTYP_WAKEUP | \
> + AT91_RSTC_RSTTYP_WATCHDOG)
> +
> +/* Disable Watchdog */
> +#define CONFIG_SYS_WDTC_WDMR_VAL \
> + (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \
> + AT91_WDT_WDV | \
> + AT91_WDT_WDDIS | \
> + AT91_WDT_WDD)
> +
> +#endif /* __CONFIG_H */
> diff --git a/arch/arm/boards/pm9261/env/config b/arch/arm/boards/pm9261/env/config
> new file mode 100644
> index 0000000..f7e133e
> --- /dev/null
> +++ b/arch/arm/boards/pm9261/env/config
> @@ -0,0 +1,41 @@
> +#!/bin/sh
> +
> +# use 'dhcp' to do dhcp in barebox and in kernel
> +# use 'none' if you want to skip kernel ip autoconfiguration
> +ip=dhcp
> +
> +# or set your networking parameters here
> +#eth0.ipaddr=a.b.c.d
> +#eth0.netmask=a.b.c.d
> +#eth0.gateway=a.b.c.d
> +#eth0.serverip=a.b.c.d
> +
> +# can be either 'net' or 'nand'
> +kernel_loc=net
> +# can be either 'net', 'nand' or 'initrd'
> +rootfs_loc=net
> +
> +# can be either 'jffs2' or 'ubifs'
> +rootfs_type=ubifs
> +rootfsimage=root.$rootfs_type
> +
> +# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
> +#kernelimage_type=zimage
> +#kernelimage=zImage
> +kernelimage_type=uimage
> +kernelimage=uImage
> +#kernelimage_type=raw
> +#kernelimage=Image
> +#kernelimage_type=raw_lzo
> +#kernelimage=Image.lzo
> +
> +nor_parts="256k(barebox)ro,64k(bareboxenv),1536k(kernel),-(root)"
> +rootfs_mtdblock_nor=3
> +
> +autoboot_timeout=3
> +
> +bootargs="console=ttyS0,115200"
> +
> +# set a fancy prompt (if support is compiled in)
> +PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
> +
> diff --git a/arch/arm/boards/pm9261/init.c b/arch/arm/boards/pm9261/init.c
> new file mode 100644
> index 0000000..6fb14f7
> --- /dev/null
> +++ b/arch/arm/boards/pm9261/init.c
> @@ -0,0 +1,168 @@
> +/*
> + * Copyright (C) 2007 Sascha Hauer, Pengutronix
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + *
> + */
> +
> +#include <common.h>
> +#include <net.h>
> +#include <init.h>
> +#include <environment.h>
> +#include <asm/armlinux.h>
> +#include <generated/mach-types.h>
> +#include <partition.h>
> +#include <fs.h>
> +#include <fcntl.h>
> +#include <asm/io.h>
> +#include <asm/hardware.h>
> +#include <nand.h>
> +#include <linux/mtd/nand.h>
> +#include <mach/at91_pmc.h>
> +#include <mach/board.h>
> +#include <mach/gpio.h>
> +#include <mach/io.h>
> +#include <mach/at91sam9_smc.h>
> +#include <mach/sam9_smc.h>
> +#include <dm9000.h>
> +
> +static struct atmel_nand_data nand_pdata = {
> + .ale = 22,
> + .cle = 21,
> +/* .det_pin = ... not connected */
> + .rdy_pin = AT91_PIN_PA16,
> + .enable_pin = AT91_PIN_PC14,
> +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
> + .bus_width_16 = 1,
> +#else
> + .bus_width_16 = 0,
> +#endif
> +};
> +
> +static struct sam9_smc_config pm_nand_smc_config = {
> + .ncs_read_setup = 0,
> + .nrd_setup = 1,
> + .ncs_write_setup = 0,
> + .nwe_setup = 1,
> +
> + .ncs_read_pulse = 3,
> + .nrd_pulse = 3,
> + .ncs_write_pulse = 3,
> + .nwe_pulse = 3,
> +
> + .read_cycle = 5,
> + .write_cycle = 5,
> +
> + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
> + .tdf_cycles = 2,
> +};
> +
> +static void pm_add_device_nand(void)
> +{
> + /* setup bus-width (8 or 16) */
> + if (nand_pdata.bus_width_16)
> + pm_nand_smc_config.mode |= AT91_SMC_DBW_16;
> + else
> + pm_nand_smc_config.mode |= AT91_SMC_DBW_8;
> +
> + /* configure chip-select 3 (NAND) */
> + sam9_smc_configure(3, &pm_nand_smc_config);
> +
> + at91_add_device_nand(&nand_pdata);
> +}
> +
> +/*
> + * DM9000 ethernet device
> + */
> +#if defined(CONFIG_DRIVER_NET_DM9000)
> +static struct dm9000_platform_data dm9000_data = {
> + .iobase = AT91_CHIPSELECT_2,
> + .iodata = AT91_CHIPSELECT_2 + 4,
> + .buswidth = DM9000_WIDTH_16,
> + .srom = 1,
> +};
> +
> +static struct device_d dm9000_dev = {
> + .id = 0,
> + .name = "dm9000",
> + .map_base = AT91_CHIPSELECT_2,
> + .size = 8,
> + .platform_data = &dm9000_data,
> +};
> +
> +/*
> + * SMC timings for the DM9000.
> + * Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings.
> + */
> +static struct sam9_smc_config __initdata dm9000_smc_config = {
> + .ncs_read_setup = 0,
> + .nrd_setup = 2,
> + .ncs_write_setup = 0,
> + .nwe_setup = 2,
> +
> + .ncs_read_pulse = 8,
> + .nrd_pulse = 4,
> + .ncs_write_pulse = 8,
> + .nwe_pulse = 4,
> +
> + .read_cycle = 16,
> + .write_cycle = 16,
> +
> + .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
> + .tdf_cycles = 1,
> +};
> +
> +static void __init pm_add_device_dm9000(void)
> +{
> + /* Configure chip-select 2 (DM9000) */
> + sam9_smc_configure(2, &dm9000_smc_config);
> +
> + register_device(&dm9000_dev);
> +}
> +#else
> +static void __init ek_add_device_dm9000(void) {}
> +#endif /* CONFIG_DRIVER_NET_DM9000 */
> +
> +static struct device_d cfi_dev = {
> + .id = 0,
> + .name = "cfi_flash",
> + .map_base = AT91_CHIPSELECT_0,
> + .size = 4 * 1024 * 1024,
> +};
> +
> +static int pm9261_devices_init(void)
> +{
> + at91_add_device_sdram(64 * 1024 * 1024);
> + pm_add_device_nand();
> + register_device(&cfi_dev);
> + pm_add_device_dm9000();
> +
> + devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self");
> + devfs_add_partition("nor0", 0x40000, 0x10000, PARTITION_FIXED, "env0");
> +
> + armlinux_set_bootparams((void *)(AT91_CHIPSELECT_1 + 0x100));
> + armlinux_set_architecture(MACH_TYPE_PM9261);
> +
> + return 0;
> +}
> +device_initcall(pm9261_devices_init);
> +
> +static int pm9261_console_init(void)
> +{
> + at91_register_uart(0, 0);
> + return 0;
> +}
> +console_initcall(pm9261_console_init);
> diff --git a/arch/arm/configs/pm9261_defconfig b/arch/arm/configs/pm9261_defconfig
> new file mode 100644
> index 0000000..0bd9483
> --- /dev/null
> +++ b/arch/arm/configs/pm9261_defconfig
> @@ -0,0 +1,52 @@
> +CONFIG_ARCH_AT91SAM9261=y
> +CONFIG_MACH_PM9261=y
> +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_PROMPT="PM9261:"
> +CONFIG_LONGHELP=y
> +CONFIG_GLOB=y
> +CONFIG_HUSH_FANCY_PROMPT=y
> +CONFIG_CMDLINE_EDITING=y
> +CONFIG_AUTO_COMPLETE=y
> +CONFIG_MENU=y
> +CONFIG_PARTITION=y
> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
> +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/pm9261/env/"
> +CONFIG_CMD_EDIT=y
> +CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_LOADENV=y
> +CONFIG_CMD_EXPORT=y
> +CONFIG_CMD_PRINTENV=y
> +CONFIG_CMD_READLINE=y
> +CONFIG_CMD_MENU=y
> +CONFIG_CMD_MENU_MANAGEMENT=y
> +CONFIG_CMD_PASSWD=y
> +CONFIG_CMD_ECHO_E=y
> +CONFIG_CMD_LOADB=y
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_MTEST=y
> +CONFIG_CMD_FLASH=y
> +CONFIG_CMD_BOOTM_ZLIB=y
> +CONFIG_CMD_BOOTM_BZLIB=y
> +CONFIG_CMD_BOOTM_SHOW_TYPE=y
> +CONFIG_CMD_RESET=y
> +CONFIG_CMD_GO=y
> +CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_PARTITION=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_UNLZO=y
> +CONFIG_NET=y
> +CONFIG_NET_DHCP=y
> +CONFIG_NET_NFS=y
> +CONFIG_NET_PING=y
> +CONFIG_NET_TFTP=y
> +CONFIG_NET_TFTP_PUSH=y
> +CONFIG_NET_RESOLV=y
> +CONFIG_DRIVER_NET_DM9000=y
> +# CONFIG_SPI is not set
> +CONFIG_DRIVER_CFI=y
> +CONFIG_CFI_BUFFER_WRITE=y
> +CONFIG_MTD=y
> +CONFIG_NAND=y
> +CONFIG_NAND_ATMEL=y
> +CONFIG_UBI=y
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index b3932f3..f0a81f4 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -10,6 +10,7 @@ config BOARDINFO
> default "Atmel at91sam9263-ek" if MACH_AT91SAM9263EK
> default "Atmel at91sam9g20-ek" if MACH_AT91SAM9G20EK
> default "Bucyrus MMC-CPU" if MACH_MMCCPU
> + default "Ronetix PM9261" if MACH_PM9261
> default "Ronetix PM9263" if MACH_PM9263
>
> config HAVE_NAND_ATMEL_BUSWIDTH_16
> @@ -74,6 +75,13 @@ config MACH_AT91SAM9261EK
> Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
> <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
>
> +config MACH_PM9261
> + bool "Ronetix PM9261"
> + select HAS_DM9000
> + select MACH_HAS_LOWLEVEL_INIT
> + help
> + Say y here if you are using the Ronetix PM9261 Board
> +
> endchoice
>
> endif
> --
> 1.7.1
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list