[PATCH 10/13] imx nand: introduce overwritable check_int function
Sascha Hauer
s.hauer at pengutronix.de
Wed Nov 10 09:53:56 EST 2010
needed for v3 support later.
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
drivers/mtd/nand/nand_imx.c | 29 ++++++++++++++++-------------
1 files changed, 16 insertions(+), 13 deletions(-)
diff --git a/drivers/mtd/nand/nand_imx.c b/drivers/mtd/nand/nand_imx.c
index b3191a7..9e2ba32 100644
--- a/drivers/mtd/nand/nand_imx.c
+++ b/drivers/mtd/nand/nand_imx.c
@@ -114,6 +114,7 @@ struct imx_nand_host {
void (*send_page)(struct imx_nand_host *, unsigned int);
void (*send_read_id)(struct imx_nand_host *);
uint16_t (*get_dev_status)(struct imx_nand_host *);
+ int (*check_int)(struct imx_nand_host *);
};
/*
@@ -175,16 +176,21 @@ static void memcpy32(void *trg, const void *src, int size)
*t++ = *s++;
}
-/*
- * This function polls the NANDFC to wait for the basic operation to complete by
- * checking the INT bit of config2 register.
- *
- * @param max_retries number of retry attempts (separated by 1 us)
- * @param param parameter for debug
- */
+static int check_int_v1_v2(struct imx_nand_host *host)
+{
+ uint32_t tmp;
+
+ tmp = readw(host->regs + NFC_V1_V2_CONFIG2);
+ if (!(tmp & NFC_V1_V2_CONFIG2_INT))
+ return 0;
+
+ writew(tmp & ~NFC_V1_V2_CONFIG2_INT, host->regs + NFC_V1_V2_CONFIG2);
+
+ return 1;
+}
+
static void wait_op_done(struct imx_nand_host *host)
{
- u32 tmp;
int i;
/* This is a timeout of roughly 15ms on my system. We
@@ -192,12 +198,8 @@ static void wait_op_done(struct imx_nand_host *host)
* here as we might be here from nand booting.
*/
for (i = 0; i < 100000; i++) {
- if (readw(host->regs + NFC_V1_V2_CONFIG2) & NFC_V1_V2_CONFIG2_INT) {
- tmp = readw(host->regs + NFC_V1_V2_CONFIG2);
- tmp &= ~NFC_V1_V2_CONFIG2_INT;
- writew(tmp, host->regs + NFC_V1_V2_CONFIG2);
+ if (host->check_int(host))
return;
- }
}
}
@@ -913,6 +915,7 @@ static int __init imxnd_probe(struct device_d *dev)
host->send_page = send_page_v1_v2;
host->send_read_id = send_read_id_v1_v2;
host->get_dev_status = get_dev_status_v1_v2;
+ host->check_int = check_int_v1_v2;
}
if (nfc_is_v21()) {
--
1.7.2.3
More information about the barebox
mailing list