[PATCH 01/21] doc: fix typo

Robert Schwebel r.schwebel at pengutronix.de
Mon Nov 1 04:33:34 EDT 2010

Remove a # which leads to this warning:
arch/arm/mach-s3c24xx/lowlevel-init.S:307: Warning: explicit link request to 'CALC_NFCONF_TIMING' could not be resolved

Signed-off-by: Robert Schwebel <r.schwebel at pengutronix.de>
 arch/arm/mach-s3c24xx/lowlevel-init.S |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/lowlevel-init.S b/arch/arm/mach-s3c24xx/lowlevel-init.S
index e8004e5..27f3a32 100644
--- a/arch/arm/mach-s3c24xx/lowlevel-init.S
+++ b/arch/arm/mach-s3c24xx/lowlevel-init.S
@@ -304,7 +304,7 @@ minimalistic. Setup the NAND access timing is done in a safe manner, what
 means: Slowest possible values are used. If you want to increase the speed you
 should define the BOARD_DEFAULT_NAND_TIMING to a valid setting into the
 NFCONF register and add it to your board specific config.h. Refer S3C24x0's
-datasheet for further details. The macro #CALC_NFCONF_TIMING could help to
+datasheet for further details. The macro CALC_NFCONF_TIMING could help to
 calculate the register setting in a hardware independent manner.
 @note The regular NAND driver uses a platform data structure to define the

More information about the barebox mailing list