[PATCH 1/2] Add support for Eukrea's CPUIMX25
Sascha Hauer
s.hauer at pengutronix.de
Tue May 25 03:27:35 EDT 2010
On Mon, May 24, 2010 at 12:37:51PM +0200, Eric Bénard wrote:
> From: Eric Benard <eric at eukrea.com>
>
> This boards integrates 64mB of DDR, a 256MB NAND flash, a RMII Ethernet PHY
> and a i.MX257 CPU.
Ok, applied to -next.
Sascha
>
> Signed-off-by: Eric Bénard <eric at eukrea.com>
> ---
> arch/arm/Makefile | 1 +
> arch/arm/configs/eukrea_cpuimx25_defconfig | 247 ++++++++++++++++++++++++
> arch/arm/mach-imx/Kconfig | 10 +
> board/eukrea_cpuimx25/Makefile | 24 +++
> board/eukrea_cpuimx25/config.h | 27 +++
> board/eukrea_cpuimx25/env/bin/_update | 36 ++++
> board/eukrea_cpuimx25/env/bin/boot | 53 +++++
> board/eukrea_cpuimx25/env/bin/hush_hack | 1 +
> board/eukrea_cpuimx25/env/bin/init | 38 ++++
> board/eukrea_cpuimx25/env/bin/update_kernel | 8 +
> board/eukrea_cpuimx25/env/bin/update_root | 8 +
> board/eukrea_cpuimx25/env/config | 26 +++
> board/eukrea_cpuimx25/eukrea_cpuimx25.c | 275 +++++++++++++++++++++++++++
> board/eukrea_cpuimx25/lowlevel.c | 130 +++++++++++++
> 14 files changed, 884 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/configs/eukrea_cpuimx25_defconfig
> create mode 100644 board/eukrea_cpuimx25/Makefile
> create mode 100644 board/eukrea_cpuimx25/config.h
> create mode 100644 board/eukrea_cpuimx25/env/bin/_update
> create mode 100644 board/eukrea_cpuimx25/env/bin/boot
> create mode 100644 board/eukrea_cpuimx25/env/bin/hush_hack
> create mode 100644 board/eukrea_cpuimx25/env/bin/init
> create mode 100644 board/eukrea_cpuimx25/env/bin/update_kernel
> create mode 100644 board/eukrea_cpuimx25/env/bin/update_root
> create mode 100644 board/eukrea_cpuimx25/env/config
> create mode 100644 board/eukrea_cpuimx25/eukrea_cpuimx25.c
> create mode 100644 board/eukrea_cpuimx25/lowlevel.c
>
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index b1991c3..0bdce21 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -61,6 +61,7 @@ board-$(CONFIG_MACH_EDB9307A) := edb93xx
> board-$(CONFIG_MACH_EDB93012) := edb93xx
> board-$(CONFIG_MACH_EDB9315) := edb93xx
> board-$(CONFIG_MACH_EDB9315A) := edb93xx
> +board-$(CONFIG_MACH_EUKREA_CPUIMX25) := eukrea_cpuimx25
> board-$(CONFIG_MACH_EUKREA_CPUIMX27) := eukrea_cpuimx27
> board-$(CONFIG_MACH_FREESCALE_MX25_3STACK) := freescale-mx25-3-stack
> board-$(CONFIG_MACH_FREESCALE_MX35_3STACK) := freescale-mx35-3-stack
> diff --git a/arch/arm/configs/eukrea_cpuimx25_defconfig b/arch/arm/configs/eukrea_cpuimx25_defconfig
> new file mode 100644
> index 0000000..81f9c80
> --- /dev/null
> +++ b/arch/arm/configs/eukrea_cpuimx25_defconfig
> @@ -0,0 +1,247 @@
> +#
> +# Automatically generated make config: don't edit
> +# barebox version: 2010.03.0
> +# Fri Mar 19 11:12:11 2010
> +#
> +# CONFIG_BOARD_LINKER_SCRIPT is not set
> +CONFIG_GENERIC_LINKER_SCRIPT=y
> +CONFIG_ARM=y
> +
> +#
> +# System Type
> +#
> +# CONFIG_ARCH_AT91 is not set
> +# CONFIG_ARCH_AT91RM9200 is not set
> +# CONFIG_ARCH_EP93XX is not set
> +CONFIG_ARCH_IMX=y
> +# CONFIG_ARCH_NETX is not set
> +# CONFIG_ARCH_OMAP is not set
> +# CONFIG_ARCH_S3C24xx is not set
> +
> +#
> +# Processor Type
> +#
> +CONFIG_CPU_32=y
> +CONFIG_CPU_ARM926T=y
> +CONFIG_CPU_32v5=y
> +
> +#
> +# processor features
> +#
> +CONFIG_ARCH_TEXT_BASE=0x83f00000
> +CONFIG_BOARDINFO="Eukrea CPUIMX25"
> +CONFIG_ARCH_HAS_FEC_IMX=y
> +CONFIG_ARCH_IMX_INTERNAL_BOOT=y
> +
> +#
> +# Freescale i.MX System-on-Chip
> +#
> +# CONFIG_ARCH_IMX1 is not set
> +# CONFIG_ARCH_IMX21 is not set
> +CONFIG_ARCH_IMX25=y
> +# CONFIG_ARCH_IMX27 is not set
> +# CONFIG_ARCH_IMX31 is not set
> +# CONFIG_ARCH_IMX35 is not set
> +CONFIG_MACH_EUKREA_CPUIMX25=y
> +# CONFIG_MACH_FREESCALE_MX25_3STACK is not set
> +
> +#
> +# Board specific settings
> +#
> +
> +#
> +# i.MX specific settings
> +#
> +# CONFIG_IMX_CLKO is not set
> +# CONFIG_AEABI is not set
> +
> +#
> +# Arm specific settings
> +#
> +CONFIG_CMD_ARM_CPUINFO=y
> +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_GREGORIAN_CALENDER=y
> +CONFIG_HAS_KALLSYMS=y
> +CONFIG_HAS_MODULES=y
> +CONFIG_CMD_MEMORY=y
> +CONFIG_ENV_HANDLING=y
> +CONFIG_GENERIC_GPIO=y
> +
> +#
> +# General Settings
> +#
> +CONFIG_LOCALVERSION_AUTO=y
> +
> +#
> +# memory layout
> +#
> +CONFIG_HAVE_MMU=y
> +CONFIG_MMU=y
> +CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y
> +CONFIG_TEXT_BASE=0x83f00000
> +CONFIG_HAVE_CONFIGURABLE_MEMORY_LAYOUT=y
> +CONFIG_MEMORY_LAYOUT_DEFAULT=y
> +# CONFIG_MEMORY_LAYOUT_FIXED is not set
> +CONFIG_STACK_SIZE=0x8000
> +CONFIG_MALLOC_SIZE=0x1000000
> +# CONFIG_BROKEN is not set
> +# CONFIG_EXPERIMENTAL is not set
> +CONFIG_MACH_HAS_LOWLEVEL_INIT=y
> +CONFIG_MACH_DO_LOWLEVEL_INIT=y
> +CONFIG_PROMPT="barebox:"
> +CONFIG_BAUDRATE=115200
> +# CONFIG_LONGHELP is not set
> +CONFIG_CBSIZE=1024
> +CONFIG_MAXARGS=16
> +CONFIG_SHELL_HUSH=y
> +# CONFIG_SHELL_SIMPLE is not set
> +CONFIG_GLOB=y
> +CONFIG_PROMPT_HUSH_PS2="cpuimx25>"
> +CONFIG_CMDLINE_EDITING=y
> +CONFIG_AUTO_COMPLETE=y
> +CONFIG_DYNAMIC_CRC_TABLE=y
> +# CONFIG_ERRNO_MESSAGES is not set
> +CONFIG_TIMESTAMP=y
> +CONFIG_CONSOLE_FULL=y
> +CONFIG_CONSOLE_ACTIVATE_FIRST=y
> +# CONFIG_OF_FLAT_TREE is not set
> +CONFIG_PARTITION=y
> +CONFIG_DEFAULT_ENVIRONMENT=y
> +CONFIG_DEFAULT_ENVIRONMENT_PATH="board/eukrea_cpuimx25/env"
> +
> +#
> +# Debugging
> +#
> +# CONFIG_DEBUG_INFO is not set
> +# CONFIG_ENABLE_FLASH_NOISE is not set
> +# CONFIG_ENABLE_PARTITION_NOISE is not set
> +# CONFIG_ENABLE_DEVICE_NOISE is not set
> +
> +#
> +# Commands
> +#
> +
> +#
> +# scripting
> +#
> +CONFIG_CMD_EDIT=y
> +CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_LOADENV=y
> +CONFIG_CMD_EXPORT=y
> +CONFIG_CMD_PRINTENV=y
> +CONFIG_CMD_READLINE=y
> +CONFIG_CMD_TRUE=y
> +CONFIG_CMD_FALSE=y
> +
> +#
> +# file commands
> +#
> +CONFIG_CMD_LS=y
> +CONFIG_CMD_RM=y
> +CONFIG_CMD_CAT=y
> +CONFIG_CMD_MKDIR=y
> +CONFIG_CMD_RMDIR=y
> +CONFIG_CMD_CP=y
> +CONFIG_CMD_PWD=y
> +CONFIG_CMD_CD=y
> +CONFIG_CMD_MOUNT=y
> +CONFIG_CMD_UMOUNT=y
> +
> +#
> +# console
> +#
> +CONFIG_CMD_CLEAR=y
> +CONFIG_CMD_ECHO=y
> +
> +#
> +# memory
> +#
> +# CONFIG_CMD_LOADB is not set
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_CRC=y
> +CONFIG_CMD_MTEST=y
> +# CONFIG_CMD_MTEST_ALTERNATIVE is not set
> +
> +#
> +# flash
> +#
> +CONFIG_CMD_FLASH=y
> +
> +#
> +# booting
> +#
> +CONFIG_CMD_BOOTM=y
> +# CONFIG_CMD_BOOTM_ZLIB is not set
> +# CONFIG_CMD_BOOTM_BZLIB is not set
> +# CONFIG_CMD_BOOTM_SHOW_TYPE is not set
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_BOOTU=y
> +# CONFIG_CMD_LINUX16 is not set
> +CONFIG_CMD_RESET=y
> +CONFIG_CMD_GO=y
> +CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_PARTITION=y
> +CONFIG_CMD_TEST=y
> +CONFIG_CMD_VERSION=y
> +CONFIG_CMD_HELP=y
> +CONFIG_CMD_DEVINFO=y
> +CONFIG_CMD_BMP=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_NET=y
> +CONFIG_NET_DHCP=y
> +# CONFIG_NET_RARP is not set
> +# CONFIG_NET_NFS is not set
> +CONFIG_NET_PING=y
> +CONFIG_NET_TFTP=y
> +
> +#
> +# Drivers
> +#
> +
> +#
> +# serial drivers
> +#
> +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> +CONFIG_DRIVER_SERIAL_IMX=y
> +# CONFIG_DRIVER_SERIAL_NS16550 is not set
> +CONFIG_MIIPHY=y
> +
> +#
> +# Network drivers
> +#
> +# CONFIG_DRIVER_NET_SMC911X is not set
> +# CONFIG_DRIVER_NET_SMC91111 is not set
> +CONFIG_DRIVER_NET_FEC_IMX=y
> +
> +#
> +# SPI drivers
> +#
> +# CONFIG_SPI is not set
> +# CONFIG_I2C is not set
> +
> +#
> +# flash drivers
> +#
> +# CONFIG_DRIVER_CFI is not set
> +CONFIG_NAND=y
> +CONFIG_NAND_IMX=y
> +CONFIG_NAND_IMX_BOOT=y
> +# CONFIG_MTD_NAND_VERIFY_WRITE is not set
> +# CONFIG_MTD_NAND_ECC_SMC is not set
> +CONFIG_MTD_NAND_IDS=y
> +# CONFIG_ATA is not set
> +# CONFIG_USB is not set
> +# CONFIG_USB_GADGET is not set
> +CONFIG_VIDEO=y
> +CONFIG_DRIVER_VIDEO_IMX=y
> +# CONFIG_IMXFB_DRIVER_VIDEO_IMX_OVERLAY is not set
> +
> +#
> +# Filesystem support
> +#
> +# CONFIG_FS_CRAMFS is not set
> +CONFIG_FS_RAMFS=y
> +CONFIG_FS_DEVFS=y
> +CONFIG_CRC32=y
> +# CONFIG_GENERIC_FIND_NEXT_BIT is not set
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 02d5db9..419daab 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -2,6 +2,7 @@ if ARCH_IMX
>
> config ARCH_TEXT_BASE
> hex
> + default 0x83f00000 if MACH_EUKREA_CPUIMX25
> default 0xa0000000 if MACH_EUKREA_CPUIMX27
> default 0x08f00000 if MACH_MX1ADS
> default 0xc0000000 if MACH_IMX21ADS
> @@ -16,6 +17,7 @@ config ARCH_TEXT_BASE
> default 0x08f80000 if MACH_SCB9328
>
> config BOARDINFO
> + default "Eukrea CPUIMX25" if MACH_EUKREA_CPUIMX25
> default "Eukrea CPUIMX27" if MACH_EUKREA_CPUIMX27
> default "Freescale i.MX21 ADS" if MACH_IMX21ADS
> default "Freescale i.MX27 ADS" if MACH_IMX27ADS
> @@ -124,6 +126,14 @@ choice
>
> prompt "i.MX25 Board Type"
>
> +config MACH_EUKREA_CPUIMX25
> + bool "Eukrea CPUIMX25"
> + select MACH_HAS_LOWLEVEL_INIT
> + select HAVE_MMU
> + help
> + Say Y here if you are using the Eukrea Electromatique's CPUIMX25
> + equipped with a Freescale i.MX25 Processor
> +
> config MACH_FREESCALE_MX25_3STACK
> bool "Freescale MX25 3stack"
> select HAS_CFI
> diff --git a/board/eukrea_cpuimx25/Makefile b/board/eukrea_cpuimx25/Makefile
> new file mode 100644
> index 0000000..406c6f3
> --- /dev/null
> +++ b/board/eukrea_cpuimx25/Makefile
> @@ -0,0 +1,24 @@
> +#
> +# (C) 2010 Eukrea Electromatique, Eric Bénard <eric at eukrea.com>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +obj-y += lowlevel.o
> +obj-y += eukrea_cpuimx25.o
> diff --git a/board/eukrea_cpuimx25/config.h b/board/eukrea_cpuimx25/config.h
> new file mode 100644
> index 0000000..efff909
> --- /dev/null
> +++ b/board/eukrea_cpuimx25/config.h
> @@ -0,0 +1,27 @@
> +/*
> + * (c) 2010 Eukrea Electromatique, Eric Bénard <eric at eukrea.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#define CONFIG_MX25_HCLK_FREQ 24000000
> +
> +#endif
> +
> +/* nothing to do here yet */
> diff --git a/board/eukrea_cpuimx25/env/bin/_update b/board/eukrea_cpuimx25/env/bin/_update
> new file mode 100644
> index 0000000..014bce3
> --- /dev/null
> +++ b/board/eukrea_cpuimx25/env/bin/_update
> @@ -0,0 +1,36 @@
> +#!/bin/sh
> +
> +if [ -z "$part" -o -z "$image" ]; then
> + echo "define \$part and \$image"
> + exit 1
> +fi
> +
> +if [ ! -e "$part" ]; then
> + echo "Partition $part does not exist"
> + exit 1
> +fi
> +
> +if [ $# = 1 ]; then
> + image=$1
> +fi
> +
> +if [ x$ip = xdhcp ]; then
> + dhcp
> +fi
> +
> +ping $eth0.serverip
> +if [ $? -ne 0 ] ; then
> + echo "update aborted"
> + exit 1
> +fi
> +
> +unprotect $part
> +
> +echo
> +echo "erasing partition $part"
> +erase $part
> +
> +echo
> +echo "flashing $image to $part"
> +echo
> +tftp $image $part
> diff --git a/board/eukrea_cpuimx25/env/bin/boot b/board/eukrea_cpuimx25/env/bin/boot
> new file mode 100644
> index 0000000..3311114
> --- /dev/null
> +++ b/board/eukrea_cpuimx25/env/bin/boot
> @@ -0,0 +1,53 @@
> +#!/bin/sh
> +
> +. /env/config
> +
> +if [ x$1 = xjffS2 ]; then
> + root=jffs2
> + kernel=nand
> +fi
> +
> +if [ x$1 = xubifs ]; then
> + root=ubifs
> + kernel=nand
> +fi
> +
> +if [ x$1 = xnet ]; then
> + root=net
> + kernel=net
> +fi
> +
> +if [ x$ip = xdhcp ]; then
> + bootargs="$bootargs ip=dhcp"
> +else
> + if [ x$ip = xoff ]; then
> + bootargs="$bootargs ip=off"
> + else
> + bootargs="$bootargs ip=$eth0.ipaddr:$eth0.serverip:$eth0.gateway:$eth0.netmask:::"
> + fi
> +fi
> +
> +if [ x$root = xjffs2 ]; then
> + bootargs="$bootargs root=/dev/mtdblock$rootpartnum_nand rootfstype=jffs2"
> +fi
> +
> +if [ x$root = xubifs ]; then
> + bootargs="$bootargs root=ubi0:root ubi.mtd=$rootpartnum_nand rootfstype=ubifs"
> +fi
> +
> +if [ x$root = xnet ]; then
> + bootargs="$bootargs root=/dev/nfs nfsroot=$eth0.serverip:$nfsroot,v3,tcp"
> +fi
> +
> +bootargs="$bootargs mtdparts=mxc_nand:$nand_parts"
> +
> +if [ $kernel = net ]; then
> + if [ x$ip = xdhcp ]; then
> + dhcp
> + fi
> + tftp $uimage uImage || exit 1
> + bootm uImage
> +else
> + bootm /dev/nand0.kernel.bb
> +fi
> +
> diff --git a/board/eukrea_cpuimx25/env/bin/hush_hack b/board/eukrea_cpuimx25/env/bin/hush_hack
> new file mode 100644
> index 0000000..5fffa92
> --- /dev/null
> +++ b/board/eukrea_cpuimx25/env/bin/hush_hack
> @@ -0,0 +1 @@
> +nand -a /dev/nand0.*
> diff --git a/board/eukrea_cpuimx25/env/bin/init b/board/eukrea_cpuimx25/env/bin/init
> new file mode 100644
> index 0000000..8bcc732
> --- /dev/null
> +++ b/board/eukrea_cpuimx25/env/bin/init
> @@ -0,0 +1,38 @@
> +#!/bin/sh
> +
> +PATH=/env/bin
> +export PATH
> +
> +. /env/config
> +if [ -e /dev/nand0 ]; then
> + addpart /dev/nand0 $nand_parts
> +
> + # Uh, oh, hush first expands wildcards and then starts executing
> + # commands. What a bug!
> + source /env/bin/hush_hack
> +fi
> +
> +if [ -f /env/logo.bmp ]; then
> + bmp /env/logo.bmp
> +fi
> +
> +if [ -z $eth0.ethaddr ]; then
> + while [ -z $eth0.ethaddr ]; do
> + readline "no MAC address set for eth0. please enter the one found on your board: " eth0.ethaddr
> + done
> + echo -a /env/config "eth0.ethaddr=$eth0.ethaddr"
> + saveenv
> +fi
> +
> +echo
> +echo -n "Hit any key to stop autoboot: "
> +timeout -a $autoboot_timeout
> +if [ $? != 0 ]; then
> + echo
> + echo "type update_kernel [<imagename>] to update kernel into flash"
> + echo "type update_root [<imagename>] to update rootfs into flash"
> + echo
> + exit
> +fi
> +
> +boot
> diff --git a/board/eukrea_cpuimx25/env/bin/update_kernel b/board/eukrea_cpuimx25/env/bin/update_kernel
> new file mode 100644
> index 0000000..c2d2cc3
> --- /dev/null
> +++ b/board/eukrea_cpuimx25/env/bin/update_kernel
> @@ -0,0 +1,8 @@
> +#!/bin/sh
> +
> +. /env/config
> +
> +image=$uimage
> +part=/dev/nand0.kernel.bb
> +
> +. /env/bin/_update $1
> diff --git a/board/eukrea_cpuimx25/env/bin/update_root b/board/eukrea_cpuimx25/env/bin/update_root
> new file mode 100644
> index 0000000..dd89a5a
> --- /dev/null
> +++ b/board/eukrea_cpuimx25/env/bin/update_root
> @@ -0,0 +1,8 @@
> +#!/bin/sh
> +
> +. /env/config
> +
> +image=$rootfs
> +part=/dev/nand0.root.bb
> +
> +. /env/bin/_update $1
> diff --git a/board/eukrea_cpuimx25/env/config b/board/eukrea_cpuimx25/env/config
> new file mode 100644
> index 0000000..eb5fced
> --- /dev/null
> +++ b/board/eukrea_cpuimx25/env/config
> @@ -0,0 +1,26 @@
> +#!/bin/sh
> +
> +# can be either 'net' or 'jffs2' or 'ubifs'
> +kernel=nand
> +root=jffs2
> +
> +basedir=cpuimx25
> +uimage=$basedir/uImage
> +rootfs=$basedir/rootfs
> +
> +autoboot_timeout=1
> +
> +nfsroot=""
> +bootargs="console=ttymxc0,115200"
> +
> +nand_parts="256k(barebox)ro,128k(bareboxenv),2176k(kernel),-(root)"
> +rootpartnum_nand=3
> +
> +# use 'dhcp' to do dhcp in barebox and in kernel
> +ip=dhcp
> +
> +# or set your networking parameters here
> +#eth0.ipaddr=a.b.c.d
> +#eth0.netmask=a.b.c.d
> +#eth0.gateway=a.b.c.d
> +eth0.serverip=192.168.1.15
> diff --git a/board/eukrea_cpuimx25/eukrea_cpuimx25.c b/board/eukrea_cpuimx25/eukrea_cpuimx25.c
> new file mode 100644
> index 0000000..478f2d4
> --- /dev/null
> +++ b/board/eukrea_cpuimx25/eukrea_cpuimx25.c
> @@ -0,0 +1,275 @@
> +/*
> + * (C) 2009 Pengutronix, Sascha Hauer <s.hauer at pengutronix.de>
> + * (c) 2010 Eukrea Electromatique, Eric Bénard <eric at eukrea.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + *
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <driver.h>
> +#include <environment.h>
> +#include <mach/imx-regs.h>
> +#include <asm/armlinux.h>
> +#include <mach/gpio.h>
> +#include <asm/io.h>
> +#include <asm/mmu.h>
> +
> +#include <partition.h>
> +#include <asm/mach-types.h>
> +#include <mach/imx-nand.h>
> +#include <mach/imxfb.h>
> +#include <fec.h>
> +#include <nand.h>
> +#include <mach/imx-flash-header.h>
> +#include <mach/iomux-mx25.h>
> +
> +extern unsigned long _stext;
> +
> +void __naked __flash_header_start go(void)
> +{
> + __asm__ __volatile__("b exception_vectors\n");
> +}
> +
> +struct imx_dcd_entry __dcd_entry_0x400 dcd_entry[] = {
> + { .ptr_type = 4, .addr = 0xb8001010, .val = 0x00000004, },
> + { .ptr_type = 4, .addr = 0xb8001000, .val = 0x92100000, },
> + { .ptr_type = 1, .addr = 0x80000400, .val = 0x12344321, },
> + { .ptr_type = 4, .addr = 0xb8001000, .val = 0xa2100000, },
> + { .ptr_type = 4, .addr = 0x80000000, .val = 0x12344321, },
> + { .ptr_type = 4, .addr = 0x80000000, .val = 0x12344321, },
> + { .ptr_type = 4, .addr = 0xb8001000, .val = 0xb2100000, },
> + { .ptr_type = 1, .addr = 0x80000033, .val = 0xda, },
> + { .ptr_type = 1, .addr = 0x81000000, .val = 0xff, },
> + { .ptr_type = 4, .addr = 0xb8001000, .val = 0x82216080, },
> + { .ptr_type = 4, .addr = 0xb8001004, .val = 0x00295729, },
> + { .ptr_type = 4, .addr = 0x53f80008, .val = 0x20034000, },
> +};
> +
> +#define APP_DEST 0x80000000
> +
> +struct imx_flash_header __flash_header_0x400 eukrea_cpuimx25_header = {
> + .app_code_jump_vector = TEXT_BASE + 0x2000,
> + .app_code_barker = APP_CODE_BARKER,
> + .app_code_csf = 0,
> + .dcd_ptr_ptr = TEXT_BASE + 0x400 + offsetof(struct imx_flash_header, dcd),
> + .super_root_key = 0,
> + .dcd = TEXT_BASE + 0x400 + offsetof(struct imx_flash_header, dcd_barker),
> + .app_dest = TEXT_BASE,
> + .dcd_barker = DCD_BARKER,
> + .dcd_block_len = sizeof(dcd_entry),
> +};
> +
> +extern unsigned long __bss_start;
> +
> +unsigned long __image_len_0x400 barebox_len = 0x40000;
> +
> +static struct fec_platform_data fec_info = {
> + .xcv_type = RMII,
> + .phy_addr = 1,
> +};
> +
> +static struct device_d fec_dev = {
> + .name = "fec_imx",
> + .map_base = IMX_FEC_BASE,
> + .platform_data = &fec_info,
> +};
> +
> +static struct memory_platform_data sdram_pdata = {
> + .name = "ram0",
> + .flags = DEVFS_RDWR,
> +};
> +
> +static struct device_d sdram0_dev = {
> + .name = "mem",
> + .map_base = IMX_SDRAM_CS0,
> + .size = 64 * 1024 * 1024,
> + .platform_data = &sdram_pdata,
> +};
> +
> +struct imx_nand_platform_data nand_info = {
> + .width = 1,
> + .hw_ecc = 1,
> +};
> +
> +static struct device_d nand_dev = {
> + .name = "imx_nand",
> + .map_base = IMX_NFC_BASE,
> + .platform_data = &nand_info,
> +};
> +
> +static struct imx_fb_videomode imxfb_mode = {
> + .mode = {
> + .name = "CMO-QVGA",
> + .refresh = 60,
> + .xres = 320,
> + .yres = 240,
> + .pixclock = KHZ2PICOS(6500),
> + .hsync_len = 30,
> + .left_margin = 38,
> + .right_margin = 20,
> + .vsync_len = 3,
> + .upper_margin = 15,
> + .lower_margin = 4,
> + },
> + .pcr = 0xCAD08B80,
> + .bpp = 16,
> +};
> +
> +static struct imx_fb_platform_data eukrea_cpuimx25_fb_data = {
> + .mode = &imxfb_mode,
> + .pwmr = 0x00A903FF,
> + .lscr1 = 0x00120300,
> + .dmacr = 0x80040060,
> +};
> +
> +
> +static struct device_d imxfb_dev = {
> + .name = "imxfb",
> + .map_base = 0x53fbc000,
> + .size = 0x1000,
> + .platform_data = &eukrea_cpuimx25_fb_data,
> +};
> +
> +#ifdef CONFIG_MMU
> +static void eukrea_cpuimx25_mmu_init(void)
> +{
> + mmu_init();
> +
> + arm_create_section(0x80000000, 0x80000000, 128, PMD_SECT_DEF_CACHED);
> + arm_create_section(0x90000000, 0x80000000, 128, PMD_SECT_DEF_UNCACHED);
> +
> + setup_dma_coherent(0x10000000);
> +
> + mmu_enable();
> +}
> +#else
> +static void eukrea_cpuimx25_mmu_init(void)
> +{
> +}
> +#endif
> +
> +static struct pad_desc eukrea_cpuimx25_pads[] = {
> + MX25_PAD_FEC_MDC__MDC,
> + MX25_PAD_FEC_MDIO__MDIO,
> + MX25_PAD_FEC_RDATA0__RDATA0,
> + MX25_PAD_FEC_RDATA1__RDATA1,
> + MX25_PAD_FEC_RX_DV__RX_DV,
> + MX25_PAD_FEC_TDATA0__TDATA0,
> + MX25_PAD_FEC_TDATA1__TDATA1,
> + MX25_PAD_FEC_TX_CLK__TX_CLK,
> + MX25_PAD_FEC_TX_EN__TX_EN,
> + /* UART1 */
> + MX25_PAD_UART1_RXD__RXD_MUX,
> + MX25_PAD_UART1_TXD__TXD_MUX,
> + MX25_PAD_UART1_RTS__RTS,
> + MX25_PAD_UART1_CTS__CTS,
> + /* LCDC */
> + MX25_PAD_LD0__LCDC_LD0,
> + MX25_PAD_LD1__LCDC_LD1,
> + MX25_PAD_LD2__LCDC_LD2,
> + MX25_PAD_LD3__LCDC_LD3,
> + MX25_PAD_LD4__LCDC_LD4,
> + MX25_PAD_LD5__LCDC_LD5,
> + MX25_PAD_LD6__LCDC_LD6,
> + MX25_PAD_LD7__LCDC_LD7,
> + MX25_PAD_LD8__LCDC_LD8,
> + MX25_PAD_LD9__LCDC_LD9,
> + MX25_PAD_LD10__LCDC_LD10,
> + MX25_PAD_LD11__LCDC_LD11,
> + MX25_PAD_LD12__LCDC_LD12,
> + MX25_PAD_LD13__LCDC_LD13,
> + MX25_PAD_LD14__LCDC_LD14,
> + MX25_PAD_LD15__LCDC_LD15,
> + MX25_PAD_GPIO_E__LCDC_LD16,
> + MX25_PAD_GPIO_F__LCDC_LD17,
> + MX25_PAD_LSCLK__LCDC_LSCLK,
> + MX25_PAD_OE_ACD__LCDC_OE_ACD,
> + MX25_PAD_VSYNC__LCDC_VSYN,
> + MX25_PAD_HSYNC__LCDC_HSYN,
> + /* BACKLIGHT CONTROL */
> + MX25_PAD_PWM__GPIO26,
> +};
> +
> +static int eukrea_cpuimx25_devices_init(void)
> +{
> + eukrea_cpuimx25_mmu_init();
> +
> + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
> + ARRAY_SIZE(eukrea_cpuimx25_pads));
> + register_device(&fec_dev);
> +
> + nand_info.width = 1;
> + register_device(&nand_dev);
> +
> + devfs_add_partition("nand0", 0x00000, 0x40000,
> + PARTITION_FIXED, "self_raw");
> + dev_add_bb_dev("self_raw", "self0");
> +
> + devfs_add_partition("nand0", 0x40000, 0x40000,
> + PARTITION_FIXED, "env_raw");
> + dev_add_bb_dev("env_raw", "env0");
> +
> + register_device(&sdram0_dev);
> +
> + /* enable LCD */
> + gpio_direction_output(26, 1);
> + gpio_set_value(26, 1);
> +
> + register_device(&imxfb_dev);
> +
> + armlinux_add_dram(&sdram0_dev);
> + armlinux_set_bootparams((void *)0x80000100);
> + armlinux_set_architecture(MACH_TYPE_MX25_3DS);
> +
> + return 0;
> +}
> +
> +device_initcall(eukrea_cpuimx25_devices_init);
> +
> +static struct device_d eukrea_cpuimx25_serial_device = {
> + .name = "imx_serial",
> + .map_base = IMX_UART1_BASE,
> + .size = 16 * 1024,
> +};
> +
> +static int eukrea_cpuimx25_console_init(void)
> +{
> + writel(0x03010101, IMX_CCM_BASE + CCM_PCDR3);
> + register_device(&eukrea_cpuimx25_serial_device);
> + return 0;
> +}
> +
> +console_initcall(eukrea_cpuimx25_console_init);
> +
> +#ifdef CONFIG_NAND_IMX_BOOT
> +void __bare_init nand_boot(void)
> +{
> + imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
> +}
> +#endif
> +
> +static int eukrea_cpuimx25_core_setup(void)
> +{
> + writel(0x01010103, IMX_CCM_BASE + CCM_PCDR2);
> + return 0;
> +
> +}
> +core_initcall(eukrea_cpuimx25_core_setup);
> diff --git a/board/eukrea_cpuimx25/lowlevel.c b/board/eukrea_cpuimx25/lowlevel.c
> new file mode 100644
> index 0000000..b9d3ce5
> --- /dev/null
> +++ b/board/eukrea_cpuimx25/lowlevel.c
> @@ -0,0 +1,130 @@
> +/*
> + *
> + * (c) 2007 Pengutronix, Sascha Hauer <s.hauer at pengutronix.de>
> + * (c) 2010 Eukrea Electromatique, Eric Bénard <eric at eukrea.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +#include <common.h>
> +#include <init.h>
> +#include <mach/imx-regs.h>
> +#include <mach/imx-pll.h>
> +#include <mach/esdctl.h>
> +#include <asm/cache-l2x0.h>
> +#include <asm/io.h>
> +#include <mach/imx-nand.h>
> +#include <asm/barebox-arm.h>
> +#include <asm-generic/memory_layout.h>
> +#include <asm/system.h>
> +
> +static void __bare_init __naked insdram(void)
> +{
> + uint32_t r;
> +
> + /* setup a stack to be able to call imx_nand_load_image() */
> + r = STACK_BASE + STACK_SIZE - 12;
> + __asm__ __volatile__("mov sp, %0" : : "r"(r));
> +
> + imx_nand_load_image((void *)TEXT_BASE, 256 * 1024);
> +
> + board_init_lowlevel_return();
> +}
> +
> +#define MX25_CCM_MCR 0x64
> +#define MX25_CCM_CGR0 0x0c
> +#define MX25_CCM_CGR1 0x10
> +#define MX25_CCM_CGR2 0x14
> +
> +void __bare_init __naked board_init_lowlevel(void)
> +{
> + uint32_t r;
> + unsigned int *trg, *src;
> + int i;
> +
> + /* AIPS setup - Only setup MPROTx registers. The PACR default values are good.
> + * Set all MPROTx to be non-bufferable, trusted for R/W,
> + * not forced to user-mode.
> + */
> + writel(0x77777777, 0x43f00000);
> + writel(0x77777777, 0x43f00004);
> + writel(0x77777777, 0x53f00000);
> + writel(0x77777777, 0x53f00004);
> +
> + /* MAX (Multi-Layer AHB Crossbar Switch) setup
> + * MPR - priority for MX25 is (SDHC2/SDMA)>USBOTG>RTIC>IAHB>DAHB
> + */
> + writel(0x00002143, 0x43f04000);
> + writel(0x00002143, 0x43f04100);
> + writel(0x00002143, 0x43f04200);
> + writel(0x00002143, 0x43f04300);
> + writel(0x00002143, 0x43f04400);
> + /* SGPCR - always park on last master */
> + writel(0x10, 0x43f04010);
> + writel(0x10, 0x43f04110);
> + writel(0x10, 0x43f04210);
> + writel(0x10, 0x43f04310);
> + writel(0x10, 0x43f04410);
> + /* MGPCR - restore default values */
> + writel(0x0, 0x43f04800);
> + writel(0x0, 0x43f04900);
> + writel(0x0, 0x43f04a00);
> + writel(0x0, 0x43f04b00);
> + writel(0x0, 0x43f04c00);
> +
> + /* Configure M3IF registers
> + * M3IF Control Register (M3IFCTL) for MX25
> + * MRRP[0] = LCDC on priority list (1 << 0) = 0x00000001
> + * MRRP[1] = MAX1 not on priority list (0 << 1) = 0x00000000
> + * MRRP[2] = MAX0 not on priority list (0 << 2) = 0x00000000
> + * MRRP[3] = USB HOST not on priority list (0 << 3) = 0x00000000
> + * MRRP[4] = SDMA not on priority list (0 << 4) = 0x00000000
> + * MRRP[5] = SD/ATA/FEC not on priority list (0 << 5) = 0x00000000
> + * MRRP[6] = SCMFBC not on priority list (0 << 6) = 0x00000000
> + * MRRP[7] = CSI not on priority list (0 << 7) = 0x00000000
> + * ----------
> + * 0x00000001
> + */
> + writel(0x1, 0xb8003000);
> +
> + /* enable all the clocks */
> + writel(0x038A81A2, IMX_CCM_BASE + MX25_CCM_CGR0);
> + writel(0x24788F00, IMX_CCM_BASE + MX25_CCM_CGR1);
> + writel(0x00004438, IMX_CCM_BASE + MX25_CCM_CGR2);
> + writel(0x00, IMX_CCM_BASE + MX25_CCM_MCR);
> +
> +#ifdef CONFIG_NAND_IMX_BOOT
> + /* skip NAND boot if not running from NFC space */
> + r = get_pc();
> + if (r < IMX_NFC_BASE || r > IMX_NFC_BASE + 0x1000)
> + board_init_lowlevel_return();
> +
> + src = (unsigned int *)IMX_NFC_BASE;
> + trg = (unsigned int *)TEXT_BASE;
> +
> + /* Move ourselves out of NFC SRAM */
> + for (i = 0; i < 0x1000 / sizeof(int); i++)
> + *trg++ = *src++;
> +
> + /* Jump to SDRAM */
> + r = (unsigned int)&insdram;
> + __asm__ __volatile__("mov pc, %0" : : "r"(r));
> +#else
> + board_init_lowlevel_return();
> +#endif
> +}
> --
> 1.6.3.3
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list