[PATCH 6/6] imx35pdk: make COMPARE pad a GPIO1_5 output
Marc Kleine-Budde
mkl at pengutronix.de
Thu May 13 07:21:27 EDT 2010
Hello Marc,
Marc Reilly wrote:
> This pad is an interrupt source, active low for one of the external ICs.
just nitpicking from my side, see comments inline.
Cheers, Marc
> ---
> board/freescale-mx35-3-stack/3stack.c | 7 ++++++-
> 1 files changed, 6 insertions(+), 1 deletions(-)
>
> diff --git a/board/freescale-mx35-3-stack/3stack.c b/board/freescale-mx35-3-stack/3stack.c
> index 4dc25e6..797e517 100644
> --- a/board/freescale-mx35-3-stack/3stack.c
> +++ b/board/freescale-mx35-3-stack/3stack.c
> @@ -280,6 +280,8 @@ static struct pad_desc f3s_pads[] = {
> MX35_PAD_I2C1_DAT__I2C1_SDA,
>
> MX35_PAD_WDOG_RST__GPIO1_6,
> + MX35_PAD_COMPARE__GPIO1_5,
> +
no trailing whitespace, please
> /* Display */
> MX35_PAD_LD0__IPU_DISPB_DAT_0,
> MX35_PAD_LD1__IPU_DISPB_DAT_1,
> @@ -332,7 +334,7 @@ static int f3s_core_init(void)
> reg |= 0x3 << CCM_CGR1_FEC_SHIFT;
> reg |= 0x3 << CCM_CGR1_I2C1_SHIFT;
> reg = writel(reg, IMX_CCM_BASE + CCM_CGR1);
> -
> +
dito
> /* AIPS setup - Only setup MPROTx registers. The PACR default values are good.*/
> /*
> * Set all MPROTx to be non-bufferable, trusted for R/W,
> @@ -414,6 +416,9 @@ static int f3s_pmic_init_v2(struct mc13892 *mc13892)
> {
> int err = 0;
>
> + /* COMPARE pin (GPIO1_5) as output and set high */
> + gpio_direction_output( 32*0 + 5 , 1);
> +
dito
> err |= mc13892_set_bits(mc13892, MC13892_REG_SETTING_0, 0x03, 0x03);
> err |= mc13892_set_bits(mc13892, MC13892_REG_MODE_0, 0x01, 0x01);
> if (err)
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 260 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/barebox/attachments/20100513/d5c776ff/attachment.sig>
More information about the barebox
mailing list