[PATCH] Documentation: fix typos & correct symlink
w.sang at pengutronix.de
Tue Mar 2 00:51:13 EST 2010
I found the wrong symlink and activated the spell-checker while I was here.
Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
Documentation/barebox-main.dox | 16 ++++++++--------
1 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/Documentation/barebox-main.dox b/Documentation/barebox-main.dox
index 743add8..2f70c50 100644
@@ -48,7 +48,7 @@ things right - without caring about losing support for old boards.
- simulation target
- @a barebox can be compiled to run under Linux. While this is rather useless
in real world this is a great debugging and development aid. New features
- can be easily developped and tested on long train journeys and started
+ can be easily developed and tested on long train journeys and started
under gdb. There is a console driver for linux which emulates a serial
device and a tap based ethernet driver. Linux files can be mapped to
devices under @a barebox to emulate storage devices.
@@ -59,7 +59,7 @@ things right - without caring about losing support for old boards.
'eth0.ip=192.168.0.7' or 'echo $eth0.ip'
- - hooks in the startup process can be archieved with *_initcall() directives
+ - hooks in the startup process can be achieved with *_initcall() directives
in each file.
@@ -91,7 +91,7 @@ cross_compile pointing to your architecture and compiler. For @p ARCH=sandbox
we do not need a cross compiler so it is sufficient to specify the
- at code # ln -s sandbox cross_arch @endcode
+ at code # ln -s arch/sandbox cross_arch @endcode
In order to configure the various aspects of @a barebox, start the @a barebox
@@ -102,7 +102,7 @@ This command starts a menu box and lets you select all the different
options available for your architecture. Once the configuration was
finished (you can simulate this by using the standard demo config file
with 'make sandbox_defconfig'), there is a .config file in the toplevel
-directory of the sourcode.
+directory of the sourcecode.
Once @a barebox is configured, we can start the compilation
@@ -115,7 +115,7 @@ If everything goes well, the result is a file called @p barebox:
-rwxr-xr-x 1 rsc ptx 114073 Jun 26 22:34 barebox
- at a barebox usually needs an environment for storing the configuation data.
+ at a barebox usually needs an environment for storing the configuration data.
You can generate an environment using the example environment contained
@@ -146,7 +146,7 @@ loaded the example environment @a barebox will show you a menu asking for
If you have started @a barebox as root you will find a new tap device on your
-host which you can configure using ifconfig. Once you configured @a barebox's
+host which you can configure using ifconfig. Once you configured the
network settings accordingly you can do a ping or tftpboot.
If you have mapped a cramfs image try mounting it with
@@ -191,10 +191,10 @@ net / -> Networking stuff
scripts / -> Kconfig system
-Documentation / -> Parts of the documention, also doxygen
+Documentation / -> Parts of the documentation, also doxygen
- at section license barebox's License
+ at section license barebox License
This program is free software; you can redistribute it and/or
More information about the barebox