testing barebox on calao sbc35-a9260 board

[Sascha Hauer]

Hi Marek,

On Fri, Jun 25, 2010 at 11:31:49AM +0200, Belisko Marek wrote:
> Hi,
> 
> I have a calao board sbc35-a9260 with u-boot pre-installed on it.
> I would like to try barebox running on that board (also make some development).
> I build at91sam9260ek_defconfig to try it out. I became to situation
> that I don't know how to load image to board :)
> 
> I try via tftp but u-boot automatically try to boot it and I got some
> error about magic number.
> I think about possibility just download binary to some RAM address and
> then use go command in u-boot
> to test if barebox binary will work.
> 
> There exist some how-to or example how to do this?

It's perfectly fine to start barebox from U-Boot with the 'go' command.
Try 'setenv autostart no' in U-Boot to stop U-Boot from autostarting
images.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |