[PATCH 2/3] unbreak imx-ipu-fb

[Eric Bénard]

commit c3789cd49b43ec1c414ba1b0e9f48e8ccc19f8e1 set fb0.enable to 0
as a default. Re-enabling the display doesn't work after this.
Removing sdc_enable_channel from imxfb_probe fix this problem.

This patch also remove verbose log from ipu_fb_disable.

Patch tested on i.MX35.

Signed-off-by: Eric Bénard <eric at eukrea.com>
---
 drivers/video/imx-ipu-fb.c |    4 ----
 1 files changed, 0 insertions(+), 4 deletions(-)

diff --git a/drivers/video/imx-ipu-fb.c b/drivers/video/imx-ipu-fb.c
index 0bd86b2..6d1eb5e 100644
--- a/drivers/video/imx-ipu-fb.c
+++ b/drivers/video/imx-ipu-fb.c
@@ -835,8 +835,6 @@ static void ipu_fb_disable(struct fb_info *info)
 	struct ipu_fb_info *fbi = info->priv;
 	u32 reg;
 
-	printf("%s\n", __func__);
-
 	reg = reg_read(fbi, SDC_COM_CONF);
 	reg &= ~SDC_COM_BG_EN;
 	reg_write(fbi, reg, SDC_COM_CONF);
@@ -883,8 +881,6 @@ static int imxfb_probe(struct device_d *dev)
 			return -ENOMEM;
 	}
 
-	sdc_enable_channel(fbi, info->screen_base);
-
 	ret = register_framebuffer(&fbi->info);
 	if (ret < 0) {
 		dev_err(dev, "failed to register framebuffer\n");
-- 
1.6.3.3