[PATCH] mx2 GPIO OCRx register

[Sascha Hauer]

Hello Teresa,

On Fri, Jun 18, 2010 at 01:41:42PM +0200, Teresa Gamez wrote:
> Hello Sascha,
> 
> is it reasonable to create a gpio_mode commad then? Or is there an other
> way to do this in the barebox shell?

A gpio_mode command should be fine. Maybe something like
'mux_mode <pin_no> <mode>'. We could then put a list of variables
into the environment:

PC5_PF_I2C2_SDA="69 0"
Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |