[PATCH 01/11] pcm037: Add MMU support
Sascha Hauer
s.hauer at pengutronix.de
Mon Jun 14 05:48:31 EDT 2010
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
arch/arm/mach-imx/Kconfig | 2 ++
board/pcm037/pcm037.c | 31 +++++++++++++++++++++++++++++++
2 files changed, 33 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 419daab..721264b 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -206,7 +206,9 @@ choice
config MACH_PCM037
bool "phyCORE-i.MX31"
select MACH_HAS_LOWLEVEL_INIT
+ select HAVE_MMU
select USB_ISP1504 if USB
+ select ARCH_HAS_L2X0
help
Say Y here if you are using Phytec's phyCORE-i.MX31 (pcm037) equipped
with a Freescale i.MX31 Processor
diff --git a/board/pcm037/pcm037.c b/board/pcm037/pcm037.c
index aee40c6..2e6968b 100644
--- a/board/pcm037/pcm037.c
+++ b/board/pcm037/pcm037.c
@@ -33,6 +33,7 @@
#include <asm/armlinux.h>
#include <mach/gpio.h>
#include <asm/io.h>
+#include <asm/mmu.h>
#include <partition.h>
#include <asm/mach-types.h>
#include <mach/imx-nand.h>
@@ -117,6 +118,7 @@ static struct device_d sdram1_dev = {
struct imx_nand_platform_data nand_info = {
.width = 1,
.hw_ecc = 1,
+ .flash_bbt = 1,
};
static struct device_d nand_dev = {
@@ -226,8 +228,37 @@ static void pcm037_usb_init(void)
}
#endif
+#ifdef CONFIG_MMU
+static void pcm037_mmu_init(void)
+{
+ mmu_init();
+
+ arm_create_section(0x80000000, 0x80000000, 128, PMD_SECT_DEF_CACHED);
+ arm_create_section(0x90000000, 0x80000000, 128, PMD_SECT_DEF_UNCACHED);
+
+ setup_dma_coherent(0x10000000);
+
+#if TEXT_BASE & (0x100000 - 1)
+#warning cannot create vector section. Adjust TEXT_BASE to a 1M boundary
+#else
+ arm_create_section(0x0, TEXT_BASE, 1, PMD_SECT_DEF_UNCACHED);
+#endif
+ mmu_enable();
+
+#ifdef CONFIG_CACHE_L2X0
+ l2x0_init((void __iomem *)0x30000000, 0x00030024, 0x00000000);
+#endif
+}
+#else
+static void pcm037_mmu_init(void)
+{
+}
+#endif
+
static int imx31_devices_init(void)
{
+ pcm037_mmu_init();
+
__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
__REG(CSCR_L(0)) = 0x10000d03;
__REG(CSCR_A(0)) = 0x00720900;
--
1.7.1
More information about the barebox
mailing list