[PATCH 02/13] arm omap: Add I2C driver

Michael Grzeschik m.grzeschik at pengutronix.de
Wed Aug 4 05:59:06 EDT 2010


From: Sascha Hauer <s.hauer at pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik at pengutronix.de>
---
 drivers/i2c/Kconfig    |    4 +
 drivers/i2c/Makefile   |    1 +
 drivers/i2c/i2c-omap.c |  803 ++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 808 insertions(+), 0 deletions(-)
 create mode 100644 drivers/i2c/i2c-omap.c

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index a9ee411..147ea49 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -7,6 +7,10 @@ config DRIVER_I2C_IMX
 	bool "i.MX I2C Master driver"
 	depends on ARCH_IMX
 
+config DRIVER_I2C_OMAP
+	bool "OMAP I2C Master driver"
+	depends on ARCH_OMAP
+
 config DRIVER_I2C_MC13892
 	bool "MC13892 a.k.a. PMIC driver"
 
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 13e5804..9be8ab2 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -1,6 +1,7 @@
 obj-$(CONFIG_I2C) += i2c.o
 
 obj-$(CONFIG_DRIVER_I2C_IMX) += i2c-imx.o
+obj-$(CONFIG_DRIVER_I2C_OMAP) += i2c-omap.o
 
 obj-$(CONFIG_DRIVER_I2C_MC13892) += mc13892.o
 obj-$(CONFIG_DRIVER_I2C_MC34704) += mc34704.o
diff --git a/drivers/i2c/i2c-omap.c b/drivers/i2c/i2c-omap.c
new file mode 100644
index 0000000..8e7a8b5
--- /dev/null
+++ b/drivers/i2c/i2c-omap.c
@@ -0,0 +1,803 @@
+/*
+ * TI OMAP I2C master mode driver
+ *
+ * Copyright (C) 2003 MontaVista Software, Inc.
+ * Copyright (C) 2005 Nokia Corporation
+ * Copyright (C) 2004 - 2007 Texas Instruments.
+ *
+ * Originally written by MontaVista Software, Inc.
+ * Additional contributions by:
+ *	Tony Lindgren <tony at atomide.com>
+ *	Imre Deak <imre.deak at nokia.com>
+ *	Juha Yrjölä <juha.yrjola at solidboot.com>
+ *	Syed Khasim <x0khasim at ti.com>
+ *	Nishant Menon <nm at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+/* #include <linux/delay.h> */
+
+
+#include <clock.h>
+#include <common.h>
+#include <driver.h>
+#include <gpio.h>
+#include <init.h>
+#include <malloc.h>
+#include <types.h>
+#include <xfuncs.h>
+
+#include <linux/err.h>
+
+#include <asm/io.h>
+#include <i2c/i2c.h>
+#include <mach/generic.h>
+#include <mach/omap3-clock.h>
+
+#define OMAP_I2C_SIZE		0x3f
+#define OMAP1_I2C_BASE		0xfffb3800
+#define OMAP2_I2C_BASE1		0x48070000
+#define OMAP2_I2C_BASE2		0x48072000
+#define OMAP2_I2C_BASE3		0x48060000
+
+/* This will be the driver name */
+#define DRIVER_NAME "i2c-omap"
+
+#define OMAP_I2C_REV_REG		0x00
+#define OMAP_I2C_IE_REG			0x04
+#define OMAP_I2C_STAT_REG		0x08
+#define OMAP_I2C_IV_REG			0x0c
+/* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */
+#define OMAP_I2C_WE_REG			0x0c
+#define OMAP_I2C_SYSS_REG		0x10
+#define OMAP_I2C_BUF_REG		0x14
+#define OMAP_I2C_CNT_REG		0x18
+#define OMAP_I2C_DATA_REG		0x1c
+#define OMAP_I2C_SYSC_REG		0x20
+#define OMAP_I2C_CON_REG		0x24
+#define OMAP_I2C_OA_REG			0x28
+#define OMAP_I2C_SA_REG			0x2c
+#define OMAP_I2C_PSC_REG		0x30
+#define OMAP_I2C_SCLL_REG		0x34
+#define OMAP_I2C_SCLH_REG		0x38
+#define OMAP_I2C_SYSTEST_REG		0x3c
+#define OMAP_I2C_BUFSTAT_REG		0x40
+
+/* I2C Interrupt Enable Register (OMAP_I2C_IE): */
+#define OMAP_I2C_IE_XDR		(1 << 14)	/* TX Buffer drain int enable */
+#define OMAP_I2C_IE_RDR		(1 << 13)	/* RX Buffer drain int enable */
+#define OMAP_I2C_IE_XRDY	(1 << 4)	/* TX data ready int enable */
+#define OMAP_I2C_IE_RRDY	(1 << 3)	/* RX data ready int enable */
+#define OMAP_I2C_IE_ARDY	(1 << 2)	/* Access ready int enable */
+#define OMAP_I2C_IE_NACK	(1 << 1)	/* No ack interrupt enable */
+#define OMAP_I2C_IE_AL		(1 << 0)	/* Arbitration lost int ena */
+
+/* I2C Status Register (OMAP_I2C_STAT): */
+#define OMAP_I2C_STAT_XDR	(1 << 14)	/* TX Buffer draining */
+#define OMAP_I2C_STAT_RDR	(1 << 13)	/* RX Buffer draining */
+#define OMAP_I2C_STAT_BB	(1 << 12)	/* Bus busy */
+#define OMAP_I2C_STAT_ROVR	(1 << 11)	/* Receive overrun */
+#define OMAP_I2C_STAT_XUDF	(1 << 10)	/* Transmit underflow */
+#define OMAP_I2C_STAT_AAS	(1 << 9)	/* Address as slave */
+#define OMAP_I2C_STAT_AD0	(1 << 8)	/* Address zero */
+#define OMAP_I2C_STAT_XRDY	(1 << 4)	/* Transmit data ready */
+#define OMAP_I2C_STAT_RRDY	(1 << 3)	/* Receive data ready */
+#define OMAP_I2C_STAT_ARDY	(1 << 2)	/* Register access ready */
+#define OMAP_I2C_STAT_NACK	(1 << 1)	/* No ack interrupt enable */
+#define OMAP_I2C_STAT_AL	(1 << 0)	/* Arbitration lost int ena */
+
+/* I2C WE wakeup enable register */
+#define OMAP_I2C_WE_XDR_WE	(1 << 14)	/* TX drain wakup */
+#define OMAP_I2C_WE_RDR_WE	(1 << 13)	/* RX drain wakeup */
+#define OMAP_I2C_WE_AAS_WE	(1 << 9)	/* Address as slave wakeup*/
+#define OMAP_I2C_WE_BF_WE	(1 << 8)	/* Bus free wakeup */
+#define OMAP_I2C_WE_STC_WE	(1 << 6)	/* Start condition wakeup */
+#define OMAP_I2C_WE_GC_WE	(1 << 5)	/* General call wakeup */
+#define OMAP_I2C_WE_DRDY_WE	(1 << 3)	/* TX/RX data ready wakeup */
+#define OMAP_I2C_WE_ARDY_WE	(1 << 2)	/* Reg access ready wakeup */
+#define OMAP_I2C_WE_NACK_WE	(1 << 1)	/* No acknowledgment wakeup */
+#define OMAP_I2C_WE_AL_WE	(1 << 0)	/* Arbitration lost wakeup */
+
+#define OMAP_I2C_WE_ALL		(OMAP_I2C_WE_XDR_WE | OMAP_I2C_WE_RDR_WE | \
+				OMAP_I2C_WE_AAS_WE | OMAP_I2C_WE_BF_WE | \
+				OMAP_I2C_WE_STC_WE | OMAP_I2C_WE_GC_WE | \
+				OMAP_I2C_WE_DRDY_WE | OMAP_I2C_WE_ARDY_WE | \
+				OMAP_I2C_WE_NACK_WE | OMAP_I2C_WE_AL_WE)
+
+/* I2C Buffer Configuration Register (OMAP_I2C_BUF): */
+#define OMAP_I2C_BUF_RDMA_EN	(1 << 15)	/* RX DMA channel enable */
+#define OMAP_I2C_BUF_RXFIF_CLR	(1 << 14)	/* RX FIFO Clear */
+#define OMAP_I2C_BUF_XDMA_EN	(1 << 7)	/* TX DMA channel enable */
+#define OMAP_I2C_BUF_TXFIF_CLR	(1 << 6)	/* TX FIFO Clear */
+
+/* I2C Configuration Register (OMAP_I2C_CON): */
+#define OMAP_I2C_CON_EN		(1 << 15)	/* I2C module enable */
+#define OMAP_I2C_CON_BE		(1 << 14)	/* Big endian mode */
+#define OMAP_I2C_CON_OPMODE_HS	(1 << 12)	/* High Speed support */
+#define OMAP_I2C_CON_STB	(1 << 11)	/* Start byte mode (master) */
+#define OMAP_I2C_CON_MST	(1 << 10)	/* Master/slave mode */
+#define OMAP_I2C_CON_TRX	(1 << 9)	/* TX/RX mode (master only) */
+#define OMAP_I2C_CON_XA		(1 << 8)	/* Expand address */
+#define OMAP_I2C_CON_RM		(1 << 2)	/* Repeat mode (master only) */
+#define OMAP_I2C_CON_STP	(1 << 1)	/* Stop cond (master only) */
+#define OMAP_I2C_CON_STT	(1 << 0)	/* Start condition (master) */
+
+/* I2C SCL time value when Master */
+#define OMAP_I2C_SCLL_HSSCLL	8
+#define OMAP_I2C_SCLH_HSSCLH	8
+
+/* I2C System Test Register (OMAP_I2C_SYSTEST): */
+#ifdef DEBUG
+#define OMAP_I2C_SYSTEST_ST_EN		(1 << 15)	/* System test enable */
+#define OMAP_I2C_SYSTEST_FREE		(1 << 14)	/* Free running mode */
+#define OMAP_I2C_SYSTEST_TMODE_MASK	(3 << 12)	/* Test mode select */
+#define OMAP_I2C_SYSTEST_TMODE_SHIFT	(12)		/* Test mode select */
+#define OMAP_I2C_SYSTEST_SCL_I		(1 << 3)	/* SCL line sense in */
+#define OMAP_I2C_SYSTEST_SCL_O		(1 << 2)	/* SCL line drive out */
+#define OMAP_I2C_SYSTEST_SDA_I		(1 << 1)	/* SDA line sense in */
+#define OMAP_I2C_SYSTEST_SDA_O		(1 << 0)	/* SDA line drive out */
+#endif
+
+/* OCP_SYSSTATUS bit definitions */
+#define SYSS_RESETDONE_MASK		(1 << 0)
+
+/* OCP_SYSCONFIG bit definitions */
+#define SYSC_CLOCKACTIVITY_MASK		(0x3 << 8)
+#define SYSC_SIDLEMODE_MASK		(0x3 << 3)
+#define SYSC_ENAWAKEUP_MASK		(1 << 2)
+#define SYSC_SOFTRESET_MASK		(1 << 1)
+#define SYSC_AUTOIDLE_MASK		(1 << 0)
+
+#define SYSC_IDLEMODE_SMART		0x2
+#define SYSC_CLOCKACTIVITY_FCLK		0x2
+
+
+struct omap_i2c_struct {
+	void 			*base;
+	struct resource		*ioarea;
+	u32			speed;		/* Speed of bus in Khz */
+	u16			cmd_err;
+	u8			*buf;
+	size_t			buf_len;
+	struct i2c_adapter	adapter;
+	u8			fifo_size;	/* use as flag and value
+						 * fifo_size==0 implies no fifo
+						 * if set, should be trsh+1
+						 */
+	u8			rev;
+	unsigned		b_hw:1;		/* bad h/w fixes */
+	u16			iestate;	/* Saved interrupt register */
+	u16			pscstate;
+	u16			scllstate;
+	u16			sclhstate;
+	u16			bufstate;
+	u16			syscstate;
+	u16			westate;
+};
+#define to_omap_i2c_struct(a)	container_of(a, struct omap_i2c_struct, adapter)
+
+
+static inline void omap_i2c_write_reg(struct omap_i2c_struct *i2c_omap,
+				      int reg, u16 val)
+{
+	__raw_writew(val, i2c_omap->base + reg);
+}
+
+static inline u16 omap_i2c_read_reg(struct omap_i2c_struct *i2c_omap, int reg)
+{
+	return __raw_readw(i2c_omap->base + reg);
+}
+
+static void omap_i2c_unidle(struct omap_i2c_struct *i2c_omap)
+{
+	if (cpu_is_omap34xx()) {
+		omap_i2c_write_reg(i2c_omap, OMAP_I2C_CON_REG, 0);
+		omap_i2c_write_reg(i2c_omap, OMAP_I2C_PSC_REG, i2c_omap->pscstate);
+		omap_i2c_write_reg(i2c_omap, OMAP_I2C_SCLL_REG, i2c_omap->scllstate);
+		omap_i2c_write_reg(i2c_omap, OMAP_I2C_SCLH_REG, i2c_omap->sclhstate);
+		omap_i2c_write_reg(i2c_omap, OMAP_I2C_BUF_REG, i2c_omap->bufstate);
+		omap_i2c_write_reg(i2c_omap, OMAP_I2C_SYSC_REG, i2c_omap->syscstate);
+		omap_i2c_write_reg(i2c_omap, OMAP_I2C_WE_REG, i2c_omap->westate);
+		omap_i2c_write_reg(i2c_omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+	}
+
+	/*
+	 * Don't write to this register if the IE state is 0 as it can
+	 * cause deadlock.
+	 */
+	if (i2c_omap->iestate)
+		omap_i2c_write_reg(i2c_omap, OMAP_I2C_IE_REG, i2c_omap->iestate);
+}
+
+static void omap_i2c_idle(struct omap_i2c_struct *i2c_omap)
+{
+	u16 iv;
+
+	i2c_omap->iestate = omap_i2c_read_reg(i2c_omap, OMAP_I2C_IE_REG);
+	/* omap_i2c_write_reg(i2c_omap, OMAP_I2C_IE_REG, 0); */
+	if (i2c_omap->rev < OMAP_I2C_REV_2) {
+		iv = omap_i2c_read_reg(i2c_omap, OMAP_I2C_IV_REG); /* Read clears */
+	} else {
+		omap_i2c_write_reg(i2c_omap, OMAP_I2C_STAT_REG, i2c_omap->iestate);
+
+		/* Flush posted write before the i2c_omap->idle store occurs */
+		omap_i2c_read_reg(i2c_omap, OMAP_I2C_STAT_REG);
+	}
+}
+
+static int omap_i2c_init(struct omap_i2c_struct *i2c_omap)
+{
+	u16 psc = 0, scll = 0, sclh = 0, buf = 0;
+	u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
+	uint64_t start;
+
+	unsigned long fclk_rate = 12000000;
+	unsigned long internal_clk = 0;
+
+	if (i2c_omap->rev >= OMAP_I2C_REV_2) {
+		/* Disable I2C controller before soft reset */
+		omap_i2c_write_reg(i2c_omap, OMAP_I2C_CON_REG,
+			omap_i2c_read_reg(i2c_omap, OMAP_I2C_CON_REG) &
+				~(OMAP_I2C_CON_EN));
+
+		omap_i2c_write_reg(i2c_omap, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK);
+		/* For some reason we need to set the EN bit before the
+		 * reset done bit gets set. */
+		start = get_time_ns();
+
+		omap_i2c_write_reg(i2c_omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+		while (!(omap_i2c_read_reg(i2c_omap, OMAP_I2C_SYSS_REG) &
+			 SYSS_RESETDONE_MASK)) {
+			if (is_timeout(start, MSECOND)) {
+				dev_warn(i2c_omap->adapter.dev, "timeout waiting "
+						"for controller reset\n");
+				return -ETIMEDOUT;
+			}
+			mdelay(1);
+		}
+
+		/* SYSC register is cleared by the reset; rewrite it */
+		if (i2c_omap->rev == OMAP_I2C_REV_ON_2430) {
+
+			omap_i2c_write_reg(i2c_omap, OMAP_I2C_SYSC_REG,
+					   SYSC_AUTOIDLE_MASK);
+
+		} else if (i2c_omap->rev >= OMAP_I2C_REV_ON_3430) {
+			i2c_omap->syscstate = SYSC_AUTOIDLE_MASK;
+			i2c_omap->syscstate |= SYSC_ENAWAKEUP_MASK;
+			i2c_omap->syscstate |= (SYSC_IDLEMODE_SMART <<
+			      __ffs(SYSC_SIDLEMODE_MASK));
+			i2c_omap->syscstate |= (SYSC_CLOCKACTIVITY_FCLK <<
+			      __ffs(SYSC_CLOCKACTIVITY_MASK));
+
+			omap_i2c_write_reg(i2c_omap, OMAP_I2C_SYSC_REG,
+							i2c_omap->syscstate);
+			/*
+			 * Enabling all wakup sources to stop I2C freezing on
+			 * WFI instruction.
+			 * REVISIT: Some wkup sources might not be needed.
+			 */
+			i2c_omap->westate = OMAP_I2C_WE_ALL;
+			omap_i2c_write_reg(i2c_omap, OMAP_I2C_WE_REG, i2c_omap->westate);
+		}
+	}
+	omap_i2c_write_reg(i2c_omap, OMAP_I2C_CON_REG, 0);
+
+	/* omap1 handling is missing here */
+
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+
+		/*
+		 * HSI2C controller internal clk rate should be 19.2 Mhz for
+		 * HS and for all modes on 2430. On 34xx we can use lower rate
+		 * to get longer filter period for better noise suppression.
+		 * The filter is iclk (fclk for HS) period.
+		 */
+		if (i2c_omap->speed > 400 || cpu_is_omap2430())
+			internal_clk = 19200;
+		else if (i2c_omap->speed > 100)
+			internal_clk = 9600;
+		else
+			internal_clk = 4000;
+		fclk_rate = 96000000 / 1000;
+
+		/* Compute prescaler divisor */
+		psc = fclk_rate / internal_clk;
+		psc = psc - 1;
+
+		/* If configured for High Speed */
+		if (i2c_omap->speed > 400) {
+			unsigned long scl;
+
+			/* For first phase of HS mode */
+			scl = internal_clk / 400;
+			fsscll = scl - (scl / 3) - 7;
+			fssclh = (scl / 3) - 5;
+
+			/* For second phase of HS mode */
+			scl = fclk_rate / i2c_omap->speed;
+			hsscll = scl - (scl / 3) - 7;
+			hssclh = (scl / 3) - 5;
+		} else if (i2c_omap->speed > 100) {
+			unsigned long scl;
+
+			/* Fast mode */
+			scl = internal_clk / i2c_omap->speed;
+			fsscll = scl - (scl / 3) - 7;
+			fssclh = (scl / 3) - 5;
+		} else {
+			/* Standard mode */
+			fsscll = internal_clk / (i2c_omap->speed * 2) - 7;
+			fssclh = internal_clk / (i2c_omap->speed * 2) - 5;
+		}
+		scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll;
+		sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh;
+	} else {
+		/* Program desired operating rate */
+		fclk_rate /= (psc + 1) * 1000;
+		if (psc > 2)
+			psc = 2;
+		scll = fclk_rate / (i2c_omap->speed * 2) - 7 + psc;
+		sclh = fclk_rate / (i2c_omap->speed * 2) - 7 + psc;
+	}
+
+	/* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
+	omap_i2c_write_reg(i2c_omap, OMAP_I2C_PSC_REG, psc);
+
+	/* SCL low and high time values */
+	omap_i2c_write_reg(i2c_omap, OMAP_I2C_SCLL_REG, scll);
+	omap_i2c_write_reg(i2c_omap, OMAP_I2C_SCLH_REG, sclh);
+
+	if (i2c_omap->fifo_size) {
+		/* Note: setup required fifo size - 1. RTRSH and XTRSH */
+		buf = (i2c_omap->fifo_size - 1) << 8 | OMAP_I2C_BUF_RXFIF_CLR |
+			(i2c_omap->fifo_size - 1) | OMAP_I2C_BUF_TXFIF_CLR;
+		omap_i2c_write_reg(i2c_omap, OMAP_I2C_BUF_REG, buf);
+	}
+
+	/* Take the I2C module out of reset: */
+	omap_i2c_write_reg(i2c_omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+
+	/* Enable interrupts */
+	i2c_omap->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
+			OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
+			OMAP_I2C_IE_AL)  | ((i2c_omap->fifo_size) ?
+				(OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0);
+	omap_i2c_write_reg(i2c_omap, OMAP_I2C_IE_REG, i2c_omap->iestate);
+	if (cpu_is_omap34xx()) {
+		i2c_omap->pscstate = psc;
+		i2c_omap->scllstate = scll;
+		i2c_omap->sclhstate = sclh;
+		i2c_omap->bufstate = buf;
+	}
+	return 0;
+}
+
+/*
+ * Waiting on Bus Busy
+ */
+static int omap_i2c_wait_for_bb(struct i2c_adapter *adapter)
+{
+	uint64_t start;
+	struct omap_i2c_struct *i2c_omap = to_omap_i2c_struct(adapter);
+
+	start = get_time_ns();
+	while (omap_i2c_read_reg(i2c_omap, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) {
+		if (is_timeout(start, MSECOND)) {
+			dev_warn(adapter->dev, "timeout waiting for bus ready\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	return 0;
+}
+
+static inline void
+omap_i2c_ack_stat(struct omap_i2c_struct *i2c_omap, u16 stat)
+{
+	omap_i2c_write_reg(i2c_omap, OMAP_I2C_STAT_REG, stat);
+}
+
+static int
+omap_i2c_isr(struct omap_i2c_struct *dev)
+{
+	u16 bits;
+	u16 stat, w;
+	int err, count = 0;
+
+	bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
+	while ((stat = (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG))) & bits) {
+		dev_dbg(dev->adapter.dev, "IRQ (ISR = 0x%04x)\n", stat);
+		if (count++ == 100) {
+			dev_warn(dev->adapter.dev, "Too much work in one IRQ\n");
+			break;
+		}
+
+		err = 0;
+complete:
+		/*
+		 * Ack the stat in one go, but [R/X]DR and [R/X]RDY should be
+		 * acked after the data operation is complete.
+		 * Ref: TRM SWPU114Q Figure 18-31
+		 */
+		omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat &
+				~(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
+				OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
+
+		if (stat & OMAP_I2C_STAT_NACK) {
+			err |= OMAP_I2C_STAT_NACK;
+			omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
+					   OMAP_I2C_CON_STP);
+		}
+		if (stat & OMAP_I2C_STAT_AL) {
+			dev_err(dev->adapter.dev, "Arbitration lost\n");
+			err |= OMAP_I2C_STAT_AL;
+		}
+		if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
+					OMAP_I2C_STAT_AL)) {
+			omap_i2c_ack_stat(dev, stat &
+				(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
+				OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
+			return 0;
+		}
+		if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
+			u8 num_bytes = 1;
+			if (dev->fifo_size) {
+				if (stat & OMAP_I2C_STAT_RRDY)
+					num_bytes = dev->fifo_size;
+				else    /* read RXSTAT on RDR interrupt */
+					num_bytes = (omap_i2c_read_reg(dev,
+							OMAP_I2C_BUFSTAT_REG)
+							>> 8) & 0x3F;
+			}
+			while (num_bytes) {
+				num_bytes--;
+				w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
+				if (dev->buf_len) {
+					*dev->buf++ = w;
+					dev->buf_len--;
+					/* Data reg from 2430 is 8 bit wide */
+					if (!cpu_is_omap2430() &&
+							!cpu_is_omap34xx()) {
+						if (dev->buf_len) {
+							*dev->buf++ = w >> 8;
+							dev->buf_len--;
+						}
+					}
+				} else {
+					if (stat & OMAP_I2C_STAT_RRDY)
+						dev_err(dev->adapter.dev,
+							"RRDY IRQ while no data"
+								" requested\n");
+					if (stat & OMAP_I2C_STAT_RDR)
+						dev_err(dev->adapter.dev,
+							"RDR IRQ while no data"
+								" requested\n");
+					break;
+				}
+			}
+			omap_i2c_ack_stat(dev,
+				stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR));
+			continue;
+		}
+		if (stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)) {
+			u8 num_bytes = 1;
+			if (dev->fifo_size) {
+				if (stat & OMAP_I2C_STAT_XRDY)
+					num_bytes = dev->fifo_size;
+				else    /* read TXSTAT on XDR interrupt */
+					num_bytes = omap_i2c_read_reg(dev,
+							OMAP_I2C_BUFSTAT_REG)
+							& 0x3F;
+			}
+			while (num_bytes) {
+				num_bytes--;
+				w = 0;
+				if (dev->buf_len) {
+					w = *dev->buf++;
+					dev->buf_len--;
+					/* Data reg from  2430 is 8 bit wide */
+					if (!cpu_is_omap2430() &&
+							!cpu_is_omap34xx()) {
+						if (dev->buf_len) {
+							w |= *dev->buf++ << 8;
+							dev->buf_len--;
+						}
+					}
+				} else {
+					if (stat & OMAP_I2C_STAT_XRDY)
+						dev_err(dev->adapter.dev,
+							"XRDY IRQ while no "
+							"data to send\n");
+					if (stat & OMAP_I2C_STAT_XDR)
+						dev_err(dev->adapter.dev,
+							"XDR IRQ while no "
+							"data to send\n");
+					break;
+				}
+
+				/*
+				 * OMAP3430 Errata 1.153: When an XRDY/XDR
+				 * is hit, wait for XUDF before writing data
+				 * to DATA_REG. Otherwise some data bytes can
+				 * be lost while transferring them from the
+				 * memory to the I2C interface.
+				 */
+
+				if (dev->rev <= OMAP_I2C_REV_ON_3430) {
+						while (!(stat & OMAP_I2C_STAT_XUDF)) {
+							if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
+								omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
+								err |= OMAP_I2C_STAT_XUDF;
+								goto complete;
+							}
+							stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
+						}
+				}
+
+				omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
+			}
+			omap_i2c_ack_stat(dev,
+				stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
+			continue;
+		}
+		if (stat & OMAP_I2C_STAT_ROVR) {
+			dev_err(dev->adapter.dev, "Receive overrun\n");
+			dev->cmd_err |= OMAP_I2C_STAT_ROVR;
+		}
+		if (stat & OMAP_I2C_STAT_XUDF) {
+			dev_err(dev->adapter.dev, "Transmit underflow\n");
+			dev->cmd_err |= OMAP_I2C_STAT_XUDF;
+		}
+	}
+
+	return -EBUSY;
+}
+
+
+/*
+ * Low level master read/write transaction.
+ */
+static int omap_i2c_xfer_msg(struct i2c_adapter *adapter,
+			     struct i2c_msg *msg, int stop)
+{
+	struct omap_i2c_struct *i2c_omap = to_omap_i2c_struct(adapter);
+	uint64_t start;
+	u16 con;
+	u16 w;
+	int ret = 0;
+
+
+	dev_dbg(adapter->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
+		msg->addr, msg->len, msg->flags, stop);
+
+	if (msg->len == 0)
+		return -EINVAL;
+
+	omap_i2c_write_reg(i2c_omap, OMAP_I2C_SA_REG, msg->addr);
+
+	/* REVISIT: Could the STB bit of I2C_CON be used with probing? */
+	i2c_omap->buf = msg->buf;
+	i2c_omap->buf_len = msg->len;
+
+	omap_i2c_write_reg(i2c_omap, OMAP_I2C_CNT_REG, i2c_omap->buf_len);
+
+	/* Clear the FIFO Buffers */
+	w = omap_i2c_read_reg(i2c_omap, OMAP_I2C_BUF_REG);
+	w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR;
+	omap_i2c_write_reg(i2c_omap, OMAP_I2C_BUF_REG, w);
+
+	i2c_omap->cmd_err = 0;
+
+	w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT;
+
+	/* High speed configuration */
+	if (i2c_omap->speed > 400)
+		w |= OMAP_I2C_CON_OPMODE_HS;
+
+	if (msg->flags & I2C_M_TEN)
+		w |= OMAP_I2C_CON_XA;
+	if (!(msg->flags & I2C_M_RD))
+		w |= OMAP_I2C_CON_TRX;
+
+	if (!i2c_omap->b_hw && stop)
+		w |= OMAP_I2C_CON_STP;
+
+	omap_i2c_write_reg(i2c_omap, OMAP_I2C_CON_REG, w);
+
+	/*
+	 * Don't write stt and stp together on some hardware.
+	 */
+	if (i2c_omap->b_hw && stop) {
+		start = get_time_ns();
+		con = omap_i2c_read_reg(i2c_omap, OMAP_I2C_CON_REG);
+		while (con & OMAP_I2C_CON_STT) {
+			con = omap_i2c_read_reg(i2c_omap, OMAP_I2C_CON_REG);
+
+			/* Let the user know if i2c is in a bad state */
+			if (is_timeout(start, MSECOND)) {
+				dev_err(adapter->dev, "controller timed out "
+				"waiting for start condition to finish\n");
+				return -ETIMEDOUT;
+			}
+		}
+
+		w |= OMAP_I2C_CON_STP;
+		w &= ~OMAP_I2C_CON_STT;
+		omap_i2c_write_reg(i2c_omap, OMAP_I2C_CON_REG, w);
+	}
+
+	/*
+	 * REVISIT: We should abort the transfer on signals, but the bus goes
+	 * into arbitration and we're currently unable to recover from it.
+	 */
+	start = get_time_ns();
+	ret = omap_i2c_isr(i2c_omap);
+	while (ret){
+		ret = omap_i2c_isr(i2c_omap);
+		if (is_timeout(start, MSECOND)) {
+				dev_err(adapter->dev, "timed out on polling for"
+				"open i2c message handling\n");
+				return -ETIMEDOUT;
+			}
+	}
+
+	i2c_omap->buf_len = 0;
+	if (likely(!i2c_omap->cmd_err))
+		return 0;
+
+	/* We have an error */
+	if (i2c_omap->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
+			    OMAP_I2C_STAT_XUDF)) {
+		omap_i2c_init(i2c_omap);
+		return -EIO;
+	}
+
+	if (i2c_omap->cmd_err & OMAP_I2C_STAT_NACK) {
+		if (msg->flags & I2C_M_IGNORE_NAK)
+			return 0;
+		if (stop) {
+			w = omap_i2c_read_reg(i2c_omap, OMAP_I2C_CON_REG);
+			w |= OMAP_I2C_CON_STP;
+			omap_i2c_write_reg(i2c_omap, OMAP_I2C_CON_REG, w);
+		}
+		return -EREMOTEIO;
+	}
+	return -EIO;
+}
+
+
+/*
+ * Prepare controller for a transaction and call omap_i2c_xfer_msg
+ * to do the work during IRQ processing.
+ */
+static int
+omap_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg msgs[], int num)
+{
+	struct omap_i2c_struct *i2c_omap = to_omap_i2c_struct(adapter);
+	int i;
+	int r;
+
+	omap_i2c_unidle(i2c_omap);
+
+	r = omap_i2c_wait_for_bb(adapter);
+	if (r < 0)
+		goto out;
+
+	for (i = 0; i < num; i++) {
+		r = omap_i2c_xfer_msg(adapter, &msgs[i], (i == (num - 1)));
+		if (r != 0)
+			break;
+	}
+
+	if (r == 0)
+		r = num;
+out:
+	omap_i2c_idle(i2c_omap);
+	return r;
+}
+
+static int __init
+i2c_omap_probe(struct device_d *pdev)
+{
+	struct omap_i2c_struct	*i2c_omap;
+	/* struct i2c_platform_data *pdata; */
+	/* unsigned long base = pdev->map_base; */
+	int r;
+	u32 speed = 0;
+
+	i2c_omap = kzalloc(sizeof(struct omap_i2c_struct), GFP_KERNEL);
+	if (!i2c_omap) {
+		r = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	if (pdev->platform_data != NULL)
+		speed = *(u32 *)pdev->platform_data;
+	else
+		speed = 100;	/* Defualt speed */
+
+	i2c_omap->speed = speed;
+	i2c_omap->base = (void*)pdev->map_base;
+	printf ("I2C probe\n");
+	omap_i2c_unidle(i2c_omap);
+
+	i2c_omap->rev = omap_i2c_read_reg(i2c_omap, OMAP_I2C_REV_REG) & 0xff;
+	/* i2c_omap->base = OMAP2_I2C_BASE3; */
+
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		u16 s;
+
+		/* Set up the fifo size - Get total size */
+		s = (omap_i2c_read_reg(i2c_omap, OMAP_I2C_BUFSTAT_REG) >> 14) & 0x3;
+		i2c_omap->fifo_size = 0x8 << s;
+
+		/*
+		 * Set up notification threshold as half the total available
+		 * size. This is to ensure that we can handle the status on int
+		 * call back latencies.
+		 */
+		i2c_omap->fifo_size = (i2c_omap->fifo_size / 2);
+		i2c_omap->b_hw = 1; /* Enable hardware fixes */
+	}
+
+	/* reset ASAP, clearing any IRQs */
+	omap_i2c_init(i2c_omap);
+
+	dev_info(pdev, "bus %d rev%d.%d at %d kHz\n",
+		 pdev->id, i2c_omap->rev >> 4, i2c_omap->rev & 0xf, i2c_omap->speed);
+
+	omap_i2c_idle(i2c_omap);
+
+	i2c_omap->adapter.master_xfer	= omap_i2c_xfer,
+	i2c_omap->adapter.nr = pdev->id;
+	i2c_omap->adapter.dev = pdev;
+
+	/* i2c device drivers may be active on return from add_adapter() */
+	r = i2c_add_numbered_adapter(&i2c_omap->adapter);
+	if (r) {
+		dev_err(pdev, "failure adding adapter\n");
+		goto err_unuse_clocks;
+	}
+
+	return 0;
+
+err_unuse_clocks:
+	omap_i2c_write_reg(i2c_omap, OMAP_I2C_CON_REG, 0);
+	omap_i2c_idle(i2c_omap);
+
+err_free_mem:
+	kfree(i2c_omap);
+
+	return r;
+}
+
+static struct driver_d omap_i2c_driver = {
+	.probe		= i2c_omap_probe,
+	.name		= DRIVER_NAME,
+};
+
+/* I2C may be needed to bring up other drivers */
+static int __init omap_i2c_init_driver(void)
+{
+	return register_driver(&omap_i2c_driver);
+}
+device_initcall(omap_i2c_init_driver);
+
+MODULE_AUTHOR("MontaVista Software, Inc. (and others)");
+MODULE_DESCRIPTION("TI OMAP I2C bus adapter");
+MODULE_LICENSE("GPL");
-- 
1.7.1




More information about the barebox mailing list