[PATCH 06/13] beagle: Add missing pinmux for usb

[Michael Grzeschik]

From: Sascha Hauer <s.hauer at pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/boards/omap/board-beagle.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boards/omap/board-beagle.c b/arch/arm/boards/omap/board-beagle.c
index 5daad86..01c6cd2 100644
--- a/arch/arm/boards/omap/board-beagle.c
+++ b/arch/arm/boards/omap/board-beagle.c
@@ -189,6 +189,20 @@ static void mux_config(void)
 	MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0));
 	/* I2C1_SCL default mux mode is mode0 */
 	/* I2C1_SDA default mux mode is mode0 */
+	/* USB EHCI (port 2) */
+	MUX_VAL(CP(MCSPI1_CS3),		(IEN  | PTU | DIS | M3));
+	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTU | DIS | M3));
+	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTU | DIS | M3));
+	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTU | DIS | M3));
+	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTU | DIS | M3));
+	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTU | DIS | M3));
+	MUX_VAL(CP(ETK_D10_ES2),	(IDIS | PTU | DIS | M3));
+	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTU | DIS | M3));
+	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTU | DIS | M3));
+	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTU | DIS | M3));
+	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTU | DIS | M3));
+	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTU | DIS | M3));
+	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M4)) /*GPIO_147*/;
 }
 
 /**
-- 
1.7.1