[PATCH 0/3] arm/imx: serial number / UID support

[Jean-Christophe PLAGNIOL-VILLARD]

Hi,

	serial number is more for board ref than CPU ref
	as you can easly read it from the register.

	So why pass it via the ATAG?

Best Regards,
J.
On 14:58 Mon 02 Aug     , Baruch Siach wrote:
> This patch series adds support for the serial ATAG, and uses this functionality 
> to pass the i.MX25 chip UID as a serial number to the Linux kernel.
> 
> Baruch Siach (3):
>   arm: add support for the serial ATAG
>   imx25: add support for UID read from eFuse
>   mx25 3ds: set CPU UID
> 
>  arch/arm/boards/freescale-mx25-3-stack/3stack.c |    2 ++
>  arch/arm/include/asm/armlinux.h                 |    4 ++++
>  arch/arm/lib/armlinux.c                         |   19 +++++++++++++++++++
>  arch/arm/mach-imx/imx25.c                       |   12 ++++++++++++
>  arch/arm/mach-imx/include/mach/generic.h        |    1 +
>  arch/arm/mach-imx/include/mach/imx25-regs.h     |    3 +++
>  6 files changed, 41 insertions(+), 0 deletions(-)
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox