[PATCH 2/3] omap3: 3430sdp: add choice of UARTs for console

[Anand Gadiyar]

The OMAP3 SDPs have both UART1 and UART3 available.
Historically, UART1 has been used for the console.

Add a config option to select between these UARTs
(along the lines of what has been done for OMAP3 EVM)

Signed-off-by: Anand Gadiyar <gadiyar at ti.com>
---
 board/omap/Kconfig         |   16 ++++++++++++++++
 board/omap/board-sdp343x.c |    4 ++++
 2 files changed, 20 insertions(+)

Index: barebox/board/omap/Kconfig
===================================================================
--- barebox.orig/board/omap/Kconfig
+++ barebox/board/omap/Kconfig
@@ -61,6 +61,22 @@ config MACH_OMAP3EVM
 
 endchoice
 
+if MACH_OMAP343xSDP
+	choice
+	prompt "Select UART"
+
+	config OMAP343xSDP_UART1
+		bool "Use UART1"
+		help
+		  Say Y here if you would like to use UART1 as console.
+
+	config OMAP343xSDP_UART3
+		bool "Use UART3"
+		help
+		  Say Y here if you would like to use UART1 as console.
+	endchoice
+endif
+
 if MACH_OMAP3EVM
 	choice
 	prompt "Select UART"
Index: barebox/board/omap/board-sdp343x.c
===================================================================
--- barebox.orig/board/omap/board-sdp343x.c
+++ barebox/board/omap/board-sdp343x.c
@@ -611,7 +611,11 @@ static struct NS16550_plat serial_plat =
 
 static struct device_d sdp3430_serial_device = {
 	.name = "serial_ns16550",
+#if defined(CONFIG_OMAP343xSDP_UART1)
+	.map_base = OMAP_UART1_BASE,
+#elif defined(CONFIG_OMAP343xSDP_UART3)
 	.map_base = OMAP_UART3_BASE,
+#endif
 	.size = 1024,
 	.platform_data = (void *)&serial_plat,
 };