[PATCH] commands: Remove reference to non-existent CONFIG_CMD_I2C.
Sascha Hauer
s.hauer at pengutronix.de
Mon Dec 21 06:30:52 EST 2009
On Mon, Dec 21, 2009 at 06:17:19AM -0500, Robert P. J. Day wrote:
>
> Signed-off-by: Robert P. J. Day <rpjday at crashcourse.ca>
>
> ---
>
> the commands directory doesn't even have an i2c.c source file, so
> it's clearly safe to remove this reference. although i'm assuming
> that, at some point down the road, there will be an "i2c" command
> since that would be useful.
Ok, applied.
Is a i2c command really useful? For I2C eeproms you would create an
epprom driver which creates a file under /dev/ which you can then access
using the usual mm/mw commands.
Maybe an i2c command could be useful to register a new device on an I2C
bus.
Sascha
>
>
> diff --git a/commands/Makefile b/commands/Makefile
> index 134d8b3..1c657dd 100644
> --- a/commands/Makefile
> +++ b/commands/Makefile
> @@ -4,7 +4,6 @@ obj-$(CONFIG_CMD_LOADY) += loadb.o xyzModem.o
> obj-$(CONFIG_CMD_LOADS) += loads.o
> obj-$(CONFIG_CMD_ECHO) += echo.o
> obj-$(CONFIG_CMD_MEMORY) += mem.o
> -obj-$(CONFIG_CMD_I2C) += i2c.o
> obj-$(CONFIG_CMD_LOADS) += s_record.o
> obj-$(CONFIG_CMD_MTEST) += memtest.o
> obj-$(CONFIG_CMD_EDIT) += edit.o
>
> rday
> --
>
> ========================================================================
> Robert P. J. Day Waterloo, Ontario, CANADA
>
> Linux Consulting, Training and Kernel Pedantry.
>
> Web page: http://crashcourse.ca
> Twitter: http://twitter.com/rpjday
> ========================================================================
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list