[PATCH 1/2] omap3evm: Add basic support for the board
Sanjeev Premi
premi at ti.com
Thu Dec 17 04:51:13 EST 2009
This patch adds support for OMAP3EVM. It does
the following:
- Adds OMAP3EVM as an option in Kconfig.
- Adds choice for UART1/UART3 for serial console
- Minimal initializations for the board
- Updates to makefile
Signed-off-by: Sanjeev Premi <premi at ti.com>
---
board/omap/Kconfig | 27 ++++
board/omap/Makefile | 1 +
board/omap/board-omap3evm.c | 275 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 303 insertions(+), 0 deletions(-)
create mode 100644 board/omap/board-omap3evm.c
diff --git a/board/omap/Kconfig b/board/omap/Kconfig
index 07ba87c..361bed4 100644
--- a/board/omap/Kconfig
+++ b/board/omap/Kconfig
@@ -30,6 +30,7 @@ menu "OMAP Platform Features"
config BOARDINFO
default "Texas Instrument's SDP343x" if MACH_OMAP343xSDP
default "Texas Instrument's Beagle" if MACH_BEAGLE
+ default "Texas Instrument's OMAP3EVM" if MACH_OMAP3EVM
choice
prompt "Select OMAP platform"
@@ -50,8 +51,34 @@ config MACH_BEAGLE
help
Say Y here if you are using Beagle Board
+config MACH_OMAP3EVM
+ bool "Texas Instrument's OMAP3 EVM"
+ select MACH_HAS_LOWLEVEL_INIT
+ select OMAP_CLOCK_ALL
+ select HAS_OMAP_NAND
+ help
+ Say Y here if you are using OMAP3EVM
+
endchoice
+if MACH_OMAP3EVM
+ choice
+ prompt "Select UART"
+
+ config OMAP3EVM_UART1
+ bool "Use UART1"
+ depends on MACH_OMAP3EVM
+ help
+ Say Y here if you would like to use UART1 as console.
+
+ config OMAP3EVM_UART3
+ bool "Use UART3"
+ depends on MACH_OMAP3EVM
+ help
+ Say Y here if you would like to use UART3 as console.
+ endchoice
+endif
+
config MACH_OMAP_ADVANCED_MUX
bool "Enable advanced pin muxing"
depends on MACH_OMAP343xSDP
diff --git a/board/omap/Makefile b/board/omap/Makefile
index 002855a..b4bb3e1 100644
--- a/board/omap/Makefile
+++ b/board/omap/Makefile
@@ -23,5 +23,6 @@
obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += platform.o
obj-$(CONFIG_MACH_OMAP343xSDP) += board-sdp343x.o
obj-$(CONFIG_MACH_BEAGLE) += board-beagle.o
+obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
obj-$(CONFIG_MACH_OMAP_GPMC_GENERICNAND) += devices-gpmc-nand.o
diff --git a/board/omap/board-omap3evm.c b/board/omap/board-omap3evm.c
new file mode 100644
index 0000000..fdea0ff
--- /dev/null
+++ b/board/omap/board-omap3evm.c
@@ -0,0 +1,275 @@
+/**
+ * @file
+ * @brief Board Initialization routines for OMAP3EVM.
+ *
+ * FileName: board/omap/board-omap3evm.c
+ *
+ * This board is based on OMAP3530.
+ * More on OMAP3530 (including documentation can be found here):
+ * http://focus.ti.com/docs/prod/folders/print/omap3530.html
+ *
+ * This file provides initialization in two stages:
+ * @li Boot time initialization - just get SDRAM working.
+ * This is run from SRAM - so no case constructs and global vars can be used.
+ * @li Run time initialization - this is for the rest of the initializations
+ * such as flash, uart etc.
+ *
+ * Boot time initialization includes:
+ * @li SDRAM initialization.
+ * @li Pin Muxing relevant for the EVM.
+ *
+ * Run time initialization includes
+ * @li serial @ref serial_ns16550.c driver device definition
+ *
+ * Originally from board/omap/board-beagle.c
+ */
+
+/*
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ * Sanjeev Premi <premi at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <console.h>
+#include <init.h>
+#include <driver.h>
+#include <asm/io.h>
+#include <ns16550.h>
+#include <asm/armlinux.h>
+#include <mach/silicon.h>
+#include <mach/sdrc.h>
+#include <mach/sys_info.h>
+#include <mach/syslib.h>
+#include <mach/control.h>
+#include <mach/omap3-mux.h>
+#include <mach/gpmc.h>
+#include "board.h"
+
+
+/*
+ * Boot-time initialization(s)
+ */
+
+/**
+ * @brief Initialize the SDRC module
+ *
+ * @return void
+ */
+static void sdrc_init(void)
+{
+ /* SDRAM software reset */
+ /* No idle ack and RESET enable */
+ writel(0x1A, SDRC_REG(SYSCONFIG));
+ sdelay(100);
+ /* No idle ack and RESET disable */
+ writel(0x18, SDRC_REG(SYSCONFIG));
+
+ /* SDRC Sharing register */
+ /* 32-bit SDRAM on data lane [31:0] - CS0 */
+ /* pin tri-stated = 1 */
+ writel(0x00000100, SDRC_REG(SHARING));
+
+ /* ----- SDRC Registers Configuration --------- */
+ /* SDRC_MCFG0 register */
+ writel(0x02584099, SDRC_REG(MCFG_0));
+
+ /* SDRC_RFR_CTRL0 register */
+ writel(0x54601, SDRC_REG(RFR_CTRL_0));
+
+ /* SDRC_ACTIM_CTRLA0 register */
+ writel(0xA29DB4C6, SDRC_REG(ACTIM_CTRLA_0));
+
+ /* SDRC_ACTIM_CTRLB0 register */
+ writel(0x12214, SDRC_REG(ACTIM_CTRLB_0));
+
+ /* Disble Power Down of CKE due to 1 CKE on combo part */
+ writel(0x00000081, SDRC_REG(POWER));
+
+ /* SDRC_MANUAL command register */
+ /* NOP command */
+ writel(0x00000000, SDRC_REG(MANUAL_0));
+ /* Precharge command */
+ writel(0x00000001, SDRC_REG(MANUAL_0));
+ /* Auto-refresh command */
+ writel(0x00000002, SDRC_REG(MANUAL_0));
+ /* Auto-refresh command */
+ writel(0x00000002, SDRC_REG(MANUAL_0));
+
+ /* SDRC MR0 register Burst length=4 */
+ writel(0x00000032, SDRC_REG(MR_0));
+
+ /* SDRC DLLA control register */
+ writel(0x0000000A, SDRC_REG(DLLA_CTRL));
+
+ return;
+}
+
+/**
+ * @brief Do the necessary pin muxing required for OMAP3EVM. Some pins in OMAP3
+ * do not have alternate modes. We don't program these pins.
+ *
+ * See @ref MUX_VAL for description of the muxing mode.
+ *
+ * @return void
+ */
+static void mux_config(void)
+{
+ /*
+ * SDRC
+ * - SDRC_D0-SDRC_D31: Default MUX mode is mode0.
+ */
+
+ /*
+ * GPMC
+ * - GPMC_D0-GPMC_D7: Default MUX mode is mode0.
+ * - GPMC_NADV_ALE: Default MUX mode is mode0.
+ * - GPMC_NOE: Default MUX mode is mode0.
+ * - GPMC_NWE: Default MUX mode is mode0.
+ * - GPMC_WAIT0: Default MUX mode is mode0.
+ */
+ MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0));
+
+ MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0));
+
+ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0));
+
+ MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0));
+
+ /*
+ * Serial Interface
+ */
+#if defined(CONFIG_OMAP3EVM_UART1)
+ MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0));
+ MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0));
+#elif defined(CONFIG_OMAP3EVM_UART3)
+ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0));
+ MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0));
+#endif
+}
+
+/**
+ * @brief The basic entry point for board initialization.
+ *
+ * This is called as part of machine init (after arch init).
+ * This is again called with stack in SRAM, so not too many
+ * constructs possible here.
+ *
+ * @return void
+ */
+void board_init(void)
+{
+ int in_sdram = running_in_sdram();
+
+ mux_config();
+ /* Dont reconfigure SDRAM while running in SDRAM! */
+ if (!in_sdram)
+ sdrc_init();
+}
+
+/*
+ * Run-time initialization(s)
+ */
+
+#ifdef CONFIG_DRIVER_SERIAL_NS16550
+
+static struct NS16550_plat serial_plat = {
+ .clock = 48000000, /* 48MHz (APLL96/2) */
+ .f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR,
+ .reg_read = omap_uart_read,
+ .reg_write = omap_uart_write,
+};
+
+static struct device_d omap3evm_serial_device = {
+ .name = "serial_ns16550",
+#if defined(CONFIG_OMAP3EVM_UART1)
+ .map_base = OMAP_UART1_BASE,
+#elif defined(CONFIG_OMAP3EVM_UART3)
+ .map_base = OMAP_UART3_BASE,
+#endif
+ .size = 1024,
+ .platform_data = (void *)&serial_plat,
+};
+
+/**
+ * @brief Initialize the serial port to be used as console.
+ *
+ * @return result of device registration
+ */
+static int omap3evm_init_console(void)
+{
+ return register_device(&omap3evm_serial_device);
+}
+console_initcall(omap3evm_init_console);
+#endif /* CONFIG_DRIVER_SERIAL_NS16550 */
+
+static struct memory_platform_data sram_pdata = {
+ .name = "ram0",
+ .flags = DEVFS_RDWR,
+};
+
+static struct device_d sdram_dev = {
+ .name = "mem",
+ .map_base = 0x80000000,
+ .size = 128 * 1024 * 1024,
+ .platform_data = &sram_pdata,
+};
+
+static int omap3evm_init_devices(void)
+{
+ int ret;
+
+ ret = register_device(&sdram_dev);
+ if (ret)
+ goto failed;
+
+#ifdef CONFIG_GPMC
+ /*
+ * WP is made high and WAIT1 active Low
+ */
+ gpmc_generic_init(0x10);
+#endif
+
+ armlinux_add_dram(&sdram_dev);
+
+failed:
+ return ret;
+}
+device_initcall(omap3evm_init_devices);
--
1.6.2.2
More information about the barebox
mailing list