[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.3-2.fc16.x86_64 (mockbuild@x86-05.phx2.fedoraproject.org) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Fri Feb 3 20:08:08 UTC 2012 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.3-2.fc16.x86_64 root=/dev/mapper/vg_greenpc-lv_root ro rd.md=0 rd.lvm.lv=vg_greenpc/lv_root rd.dm=0 KEYTABLE=us quiet rd.lvm.lv=vg_greenpc/lv_swap rhgb rd.luks=0 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable) [ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: System manufacturer System Product Name/M4A78T-E, BIOS 3204 03/15/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfe90000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cfe90000 page 4k [ 0.000000] kernel direct mapping tables up to cfe90000 @ 1fffd000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0230000000 page 2M [ 0.000000] kernel direct mapping tables up to 230000000 @ cfe8e000-cfe90000 [ 0.000000] RAMDISK: 35f70000 - 36fb0000 [ 0.000000] ACPI: RSDP 00000000000fb880 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cfe90000 00038 (v01 031510 RSDT2042 20100315 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cfe90200 00084 (v01 031510 FACP2042 20100315 MSFT 00000097) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560) [ 0.000000] ACPI: DSDT 00000000cfe90450 0E67E (v01 A1152 A1152000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cfea8000 00040 [ 0.000000] ACPI: APIC 00000000cfe90390 0007C (v01 031510 APIC2042 20100315 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cfe90410 0003C (v01 031510 OEMMCFG 20100315 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cfea8040 00072 (v01 031510 OEMB2042 20100315 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cfe9f450 00038 (v01 031510 OEMHPET 20100315 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000230000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000 [ 0.000000] NODE_DATA [000000022ffec000 - 000000022fffffff] [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfe90 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] On node 0 totalpages: 2096671 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 831184 pages, LIFO batch:31 [ 0.000000] Normal zone: 19456 pages used for memmap [ 0.000000] Normal zone: 1225728 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfe90000 - 00000000cfea8000 [ 0.000000] PM: Registered nosave memory: 00000000cfea8000 - 00000000cfed0000 [ 0.000000] PM: Registered nosave memory: 00000000cfed0000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:30000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83072 r8192 d23424 u262144 [ 0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060826 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.3-2.fc16.x86_64 root=/dev/mapper/vg_greenpc-lv_root ro rd.md=0 rd.lvm.lv=vg_greenpc/lv_root rd.dm=0 KEYTABLE=us quiet rd.lvm.lv=vg_greenpc/lv_swap rhgb rd.luks=0 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000 [ 0.000000] Memory: 8092368k/9175040k available (6073k kernel code, 788356k absent, 294316k reserved, 5015k data, 1596k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:728 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2809.556 MHz processor. [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5619.11 BogoMIPS (lpj=2809556) [ 0.001007] pid_max: default: 32768 minimum: 301 [ 0.001028] Security Framework initialized [ 0.001034] SELinux: Initializing. [ 0.001040] SELinux: Starting in permissive mode [ 0.002494] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.004838] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.005863] Mount-cache hash table entries: 256 [ 0.005975] Initializing cgroup subsys cpuacct [ 0.005980] Initializing cgroup subsys memory [ 0.005989] Initializing cgroup subsys devices [ 0.005991] Initializing cgroup subsys freezer [ 0.006002] Initializing cgroup subsys net_cls [ 0.006004] Initializing cgroup subsys blkio [ 0.006009] Initializing cgroup subsys perf_event [ 0.006033] tseg: 0000000000 [ 0.006043] CPU: Physical Processor ID: 0 [ 0.006044] CPU: Processor Core ID: 0 [ 0.006046] mce: CPU supports 6 MCE banks [ 0.006745] ACPI: Core revision 20110623 [ 0.011008] ftrace: allocating 22796 entries in 90 pages [ 0.012408] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.023078] CPU0: AMD Athlon(tm) II X4 630 Processor stepping 02 [ 0.023998] Performance Events: AMD PMU driver. [ 0.023998] ... version: 0 [ 0.023998] ... bit width: 48 [ 0.023998] ... generic registers: 4 [ 0.023998] ... value mask: 0000ffffffffffff [ 0.023998] ... max period: 00007fffffffffff [ 0.023998] ... fixed-purpose events: 0 [ 0.023998] ... event mask: 000000000000000f [ 0.023998] NMI watchdog enabled, takes one hw-pmu counter. [ 0.023998] Booting Node 0, Processors #1 [ 0.023998] smpboot cpu 1: start_ip = 9a000 [ 0.095007] NMI watchdog enabled, takes one hw-pmu counter. [ 0.095070] #2 [ 0.095071] smpboot cpu 2: start_ip = 9a000 [ 0.166996] NMI watchdog enabled, takes one hw-pmu counter. [ 0.167055] #3 [ 0.167056] smpboot cpu 3: start_ip = 9a000 [ 0.238985] NMI watchdog enabled, takes one hw-pmu counter. [ 0.239001] Brought up 4 CPUs [ 0.239003] Total of 4 processors activated (22476.66 BogoMIPS). [ 0.240102] devtmpfs: initialized [ 0.240162] PM: Registering ACPI NVS region at cfea8000 (163840 bytes) [ 0.241530] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.241554] RTC time: 17:57:40, date: 02/09/12 [ 0.241583] NET: Registered protocol family 16 [ 0.241645] node 0 link 0: io port [1000, ffffff] [ 0.241647] TOM: 00000000d0000000 aka 3328M [ 0.241649] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.241652] node 0 link 0: mmio [a0000, bffff] [ 0.241654] node 0 link 0: mmio [d0000000, dfffffff] [ 0.241656] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.241658] node 0 link 0: mmio [f0000000, ffefffff] [ 0.241660] TOM2: 0000000230000000 aka 8960M [ 0.241662] bus: [00, 07] on node 0 link 0 [ 0.241663] bus: 00 index 0 [io 0x0000-0xffff] [ 0.241665] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.241666] bus: 00 index 2 [mem 0xd0000000-0xdfffffff] [ 0.241668] bus: 00 index 3 [mem 0xf0000000-0xffffffff] [ 0.241670] bus: 00 index 4 [mem 0x230000000-0xfcffffffff] [ 0.241679] Extended Config Space enabled on 1 nodes [ 0.241769] ACPI: bus type pci registered [ 0.241817] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.241820] PCI: not using MMCONFIG [ 0.241821] PCI: Using configuration type 1 for base access [ 0.241822] PCI: Using configuration type 1 for extended access [ 0.241851] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.241852] mtrr: probably your BIOS does not setup all CPUs. [ 0.241854] mtrr: corrected configuration. [ 0.242463] bio: create slab at 0 [ 0.242463] ACPI: Added _OSI(Module Device) [ 0.242463] ACPI: Added _OSI(Processor Device) [ 0.242463] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.242463] ACPI: Added _OSI(Processor Aggregator Device) [ 0.243399] ACPI: EC: Look up EC in DSDT [ 0.244716] ACPI: Executed 3 blocks of module-level executable AML code [ 0.271347] ACPI: Interpreter enabled [ 0.271352] ACPI: (supports S0 S1 S3 S4 S5) [ 0.271372] ACPI: Using IOAPIC for interrupt routing [ 0.271389] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.272321] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.312686] ACPI: No dock devices found. [ 0.312688] HEST: Table not found. [ 0.312691] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.312759] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.312892] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.312894] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.312896] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.312898] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.312900] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff] [ 0.312902] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.312905] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff]) [ 0.312916] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600 [ 0.312971] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604 [ 0.313001] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.313003] pci 0000:00:02.0: PME# disabled [ 0.313018] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604 [ 0.313047] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.313049] pci 0000:00:06.0: PME# disabled [ 0.313060] pci 0000:00:07.0: [1022:9607] type 1 class 0x000604 [ 0.313088] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.313090] pci 0000:00:07.0: PME# disabled [ 0.313117] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101 [ 0.313133] pci 0000:00:11.0: reg 10: [io 0xb000-0xb007] [ 0.313142] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003] [ 0.313151] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007] [ 0.313160] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003] [ 0.313169] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f] [ 0.313179] pci 0000:00:11.0: reg 24: [mem 0xfbcffc00-0xfbcfffff] [ 0.313198] pci 0000:00:11.0: set SATA to AHCI mode [ 0.313232] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.313245] pci 0000:00:12.0: reg 10: [mem 0xfbcfd000-0xfbcfdfff] [ 0.313307] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 [ 0.313319] pci 0000:00:12.1: reg 10: [mem 0xfbcfe000-0xfbcfefff] [ 0.313386] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.313404] pci 0000:00:12.2: reg 10: [mem 0xfbcff800-0xfbcff8ff] [ 0.313483] pci 0000:00:12.2: supports D1 D2 [ 0.313485] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.313488] pci 0000:00:12.2: PME# disabled [ 0.313510] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.313522] pci 0000:00:13.0: reg 10: [mem 0xfbcfb000-0xfbcfbfff] [ 0.313584] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 [ 0.313597] pci 0000:00:13.1: reg 10: [mem 0xfbcfc000-0xfbcfcfff] [ 0.313664] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.313682] pci 0000:00:13.2: reg 10: [mem 0xfbcff400-0xfbcff4ff] [ 0.313762] pci 0000:00:13.2: supports D1 D2 [ 0.313763] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.313767] pci 0000:00:13.2: PME# disabled [ 0.313790] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.313884] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 0.313900] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.313909] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.313918] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.313927] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.313936] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 0.313994] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.314015] pci 0000:00:14.2: reg 10: [mem 0xfbcf4000-0xfbcf7fff 64bit] [ 0.314078] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.314082] pci 0000:00:14.2: PME# disabled [ 0.314094] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.314166] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.314207] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.314220] pci 0000:00:14.5: reg 10: [mem 0xfbcfa000-0xfbcfafff] [ 0.314284] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.314298] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.314308] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.314319] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.314332] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.314376] pci 0000:01:00.0: [1002:954f] type 0 class 0x000300 [ 0.314387] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.314396] pci 0000:01:00.0: reg 18: [mem 0xfbde0000-0xfbdeffff 64bit] [ 0.314403] pci 0000:01:00.0: reg 20: [io 0xc000-0xc0ff] [ 0.314414] pci 0000:01:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref] [ 0.314440] pci 0000:01:00.0: supports D1 D2 [ 0.314457] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403 [ 0.314468] pci 0000:01:00.1: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit] [ 0.314517] pci 0000:01:00.1: supports D1 D2 [ 0.315977] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.315981] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.315984] pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.315987] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.316030] pci 0000:02:00.0: [1969:1026] type 0 class 0x000200 [ 0.316050] pci 0000:02:00.0: reg 10: [mem 0xfbec0000-0xfbefffff 64bit] [ 0.316060] pci 0000:02:00.0: reg 18: [io 0xdc00-0xdc7f] [ 0.316145] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.316149] pci 0000:02:00.0: PME# disabled [ 0.316167] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.316171] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.316174] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] [ 0.316176] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.316220] pci 0000:03:00.0: [1106:3403] type 0 class 0x000c00 [ 0.316249] pci 0000:03:00.0: reg 10: [mem 0xfbfff800-0xfbffffff 64bit] [ 0.316264] pci 0000:03:00.0: reg 18: [io 0xe800-0xe8ff] [ 0.316388] pci 0000:03:00.0: supports D2 [ 0.316389] pci 0000:03:00.0: PME# supported from D2 D3hot D3cold [ 0.316395] pci 0000:03:00.0: PME# disabled [ 0.317982] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 0.317986] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 0.317989] pci 0000:00:07.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.318049] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) [ 0.318058] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.318060] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.318064] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.318066] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode) [ 0.318068] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.318081] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.318218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.318242] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 0.318260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 0.318292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.318330] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.318333] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.318334] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.321411] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) [ 0.321441] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15) [ 0.321469] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.321497] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15) [ 0.321524] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.321550] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.321578] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15) [ 0.321605] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.321675] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.321675] vgaarb: loaded [ 0.321675] vgaarb: bridge control possible 0000:01:00.0 [ 0.321675] SCSI subsystem initialized [ 0.321675] libata version 3.00 loaded. [ 0.321675] usbcore: registered new interface driver usbfs [ 0.321675] usbcore: registered new interface driver hub [ 0.321675] usbcore: registered new device driver usb [ 0.321675] PCI: Using ACPI for IRQ routing [ 0.330166] PCI: pci_cache_line_size set to 64 bytes [ 0.330233] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.330235] reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff [ 0.330302] NetLabel: Initializing [ 0.330303] NetLabel: domain hash size = 128 [ 0.330305] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.330313] NetLabel: unlabeled traffic allowed by default [ 0.330326] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.330330] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.331981] Switching to clocksource hpet [ 0.336975] pnp: PnP ACPI init [ 0.336985] ACPI: bus type pnp registered [ 0.337079] pnp 00:00: [bus 00-ff] [ 0.337081] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.337083] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.337084] pnp 00:00: [io 0x0d00-0xffff window] [ 0.337086] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.337088] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.337089] pnp 00:00: [mem 0xcff00000-0xdfffffff window] [ 0.337091] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 0.337125] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.337185] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.337186] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.337220] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.337251] pnp 00:02: [dma 4] [ 0.337253] pnp 00:02: [io 0x0000-0x000f] [ 0.337254] pnp 00:02: [io 0x0081-0x0083] [ 0.337255] pnp 00:02: [io 0x0087] [ 0.337257] pnp 00:02: [io 0x0089-0x008b] [ 0.337258] pnp 00:02: [io 0x008f] [ 0.337260] pnp 00:02: [io 0x00c0-0x00df] [ 0.337280] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.337287] pnp 00:03: [io 0x0070-0x0071] [ 0.337296] pnp 00:03: [irq 8] [ 0.337315] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.337321] pnp 00:04: [io 0x0061] [ 0.337339] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.337344] pnp 00:05: [io 0x00f0-0x00ff] [ 0.337348] pnp 00:05: [irq 13] [ 0.337367] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.337392] pnp 00:06: [mem 0xfed00000-0xfed003ff] [ 0.337411] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.337464] pnp 00:07: [mem 0xfec00000-0xfec00fff] [ 0.337466] pnp 00:07: [mem 0xfee00000-0xfee00fff] [ 0.337500] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.337502] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.337505] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.337626] pnp 00:08: [io 0x0010-0x001f] [ 0.337627] pnp 00:08: [io 0x0022-0x003f] [ 0.337629] pnp 00:08: [io 0x0062-0x0063] [ 0.337630] pnp 00:08: [io 0x0065-0x006f] [ 0.337631] pnp 00:08: [io 0x0072-0x007f] [ 0.337633] pnp 00:08: [io 0x0080] [ 0.337634] pnp 00:08: [io 0x0084-0x0086] [ 0.337635] pnp 00:08: [io 0x0088] [ 0.337637] pnp 00:08: [io 0x008c-0x008e] [ 0.337638] pnp 00:08: [io 0x0090-0x009f] [ 0.337640] pnp 00:08: [io 0x00a2-0x00bf] [ 0.337641] pnp 00:08: [io 0x00b1] [ 0.337642] pnp 00:08: [io 0x00e0-0x00ef] [ 0.337644] pnp 00:08: [io 0x04d0-0x04d1] [ 0.337645] pnp 00:08: [io 0x040b] [ 0.337646] pnp 00:08: [io 0x04d6] [ 0.337648] pnp 00:08: [io 0x0c00-0x0c01] [ 0.337649] pnp 00:08: [io 0x0c14] [ 0.337650] pnp 00:08: [io 0x0c50-0x0c51] [ 0.337652] pnp 00:08: [io 0x0c52] [ 0.337653] pnp 00:08: [io 0x0c6c] [ 0.337654] pnp 00:08: [io 0x0c6f] [ 0.337656] pnp 00:08: [io 0x0cd0-0x0cd1] [ 0.337657] pnp 00:08: [io 0x0cd2-0x0cd3] [ 0.337658] pnp 00:08: [io 0x0cd4-0x0cd5] [ 0.337660] pnp 00:08: [io 0x0cd6-0x0cd7] [ 0.337661] pnp 00:08: [io 0x0cd8-0x0cdf] [ 0.337662] pnp 00:08: [io 0x0b00-0x0b3f] [ 0.337664] pnp 00:08: [io 0x0800-0x089f] [ 0.337665] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled] [ 0.337667] pnp 00:08: [io 0x0b00-0x0b0f] [ 0.337668] pnp 00:08: [io 0x0b20-0x0b3f] [ 0.337670] pnp 00:08: [io 0x0900-0x090f] [ 0.337671] pnp 00:08: [io 0x0910-0x091f] [ 0.337673] pnp 00:08: [io 0xfe00-0xfefe] [ 0.337676] pnp 00:08: [io 0x0060-0x005f disabled] [ 0.337677] pnp 00:08: [io 0x0064-0x0063 disabled] [ 0.337679] pnp 00:08: [mem 0xcff00000-0xcfffffff] [ 0.337680] pnp 00:08: [mem 0xffb80000-0xffbfffff] [ 0.337682] pnp 00:08: [mem 0xfec10000-0xfec1001f] [ 0.337745] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.337747] system 00:08: [io 0x040b] has been reserved [ 0.337749] system 00:08: [io 0x04d6] has been reserved [ 0.337751] system 00:08: [io 0x0c00-0x0c01] has been reserved [ 0.337753] system 00:08: [io 0x0c14] has been reserved [ 0.337755] system 00:08: [io 0x0c50-0x0c51] has been reserved [ 0.337757] system 00:08: [io 0x0c52] has been reserved [ 0.337758] system 00:08: [io 0x0c6c] has been reserved [ 0.337760] system 00:08: [io 0x0c6f] has been reserved [ 0.337762] system 00:08: [io 0x0cd0-0x0cd1] has been reserved [ 0.337764] system 00:08: [io 0x0cd2-0x0cd3] has been reserved [ 0.337766] system 00:08: [io 0x0cd4-0x0cd5] has been reserved [ 0.337768] system 00:08: [io 0x0cd6-0x0cd7] has been reserved [ 0.337770] system 00:08: [io 0x0cd8-0x0cdf] has been reserved [ 0.337772] system 00:08: [io 0x0b00-0x0b3f] has been reserved [ 0.337774] system 00:08: [io 0x0800-0x089f] has been reserved [ 0.337776] system 00:08: [io 0x0b00-0x0b0f] has been reserved [ 0.337778] system 00:08: [io 0x0b20-0x0b3f] has been reserved [ 0.337780] system 00:08: [io 0x0900-0x090f] has been reserved [ 0.337781] system 00:08: [io 0x0910-0x091f] has been reserved [ 0.337784] system 00:08: [io 0xfe00-0xfefe] has been reserved [ 0.337786] system 00:08: [mem 0xcff00000-0xcfffffff] has been reserved [ 0.337788] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.337790] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.337792] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.338166] pnp 00:09: [io 0x03f8-0x03ff] [ 0.338170] pnp 00:09: [irq 4] [ 0.338172] pnp 00:09: [dma 0 disabled] [ 0.338239] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.338625] pnp 00:0a: [io 0x03f0-0x03f5] [ 0.338626] pnp 00:0a: [io 0x03f7] [ 0.338630] pnp 00:0a: [irq 6] [ 0.338631] pnp 00:0a: [dma 2] [ 0.338671] pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.338710] pnp 00:0b: [io 0x0060] [ 0.338712] pnp 00:0b: [io 0x0064] [ 0.338715] pnp 00:0b: [irq 12] [ 0.338741] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.338859] pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled] [ 0.338861] pnp 00:0c: [io 0x0230-0x023f] [ 0.338862] pnp 00:0c: [io 0x0290-0x029f] [ 0.338863] pnp 00:0c: [io 0x0f40-0x0f4f] [ 0.338865] pnp 00:0c: [io 0x0a30-0x0a3f] [ 0.338900] system 00:0c: [io 0x0230-0x023f] has been reserved [ 0.338902] system 00:0c: [io 0x0290-0x029f] has been reserved [ 0.338904] system 00:0c: [io 0x0f40-0x0f4f] has been reserved [ 0.338906] system 00:0c: [io 0x0a30-0x0a3f] has been reserved [ 0.338908] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.338933] pnp 00:0d: [mem 0xe0000000-0xefffffff] [ 0.338964] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 0.338966] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.339504] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 0.339505] pnp 00:0e: [mem 0x000c0000-0x000cffff] [ 0.339507] pnp 00:0e: [mem 0x000e0000-0x000fffff] [ 0.339509] pnp 00:0e: [mem 0x00100000-0xcfefffff] [ 0.339510] pnp 00:0e: [mem 0xfec00000-0xffffffff] [ 0.339550] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.339553] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.339555] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.339557] system 00:0e: [mem 0x00100000-0xcfefffff] could not be reserved [ 0.339559] system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.339561] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.339642] pnp: PnP ACPI: found 15 devices [ 0.339643] ACPI: ACPI bus type pnp unregistered [ 0.346309] PCI: max bus depth: 1 pci_try_num: 2 [ 0.346326] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.346328] pci 0000:00:02.0: bridge window [io 0xc000-0xcfff] [ 0.346331] pci 0000:00:02.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.346334] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.346337] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.346339] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] [ 0.346341] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.346345] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 0.346346] pci 0000:00:07.0: bridge window [io 0xe000-0xefff] [ 0.346349] pci 0000:00:07.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.346352] pci 0000:00:14.4: PCI bridge to [bus 04-04] [ 0.346372] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.346375] pci 0000:00:02.0: setting latency timer to 64 [ 0.346379] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.346381] pci 0000:00:06.0: setting latency timer to 64 [ 0.346387] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.346389] pci 0000:00:07.0: setting latency timer to 64 [ 0.346396] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.346397] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.346399] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.346401] pci_bus 0000:00: resource 7 [mem 0xcff00000-0xdfffffff] [ 0.346403] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff] [ 0.346404] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.346406] pci_bus 0000:01: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.346408] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.346410] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.346411] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.346413] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.346415] pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.346417] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.346419] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.346420] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.346422] pci_bus 0000:04: resource 7 [mem 0xcff00000-0xdfffffff] [ 0.346424] pci_bus 0000:04: resource 8 [mem 0xf0000000-0xfebfffff] [ 0.346448] NET: Registered protocol family 2 [ 0.346630] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.347769] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.349975] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.350247] TCP: Hash tables configured (established 524288 bind 65536) [ 0.350249] TCP reno registered [ 0.350265] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.350318] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.350421] NET: Registered protocol family 1 [ 0.773062] pci 0000:01:00.0: Boot video device [ 0.773072] PCI: CLS 64 bytes, default 64 [ 0.773124] Unpacking initramfs... [ 1.049188] Freeing initrd memory: 16640k freed [ 1.054799] PCI-DMA: Disabling AGP. [ 1.054873] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.054875] PCI-DMA: using GART IOMMU. [ 1.054877] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.058569] IBS: LVT offset 1 assigned [ 1.058584] perf: AMD IBS detected (0x0000001f) [ 1.058903] Intel AES-NI instructions are not detected. [ 1.059015] audit: initializing netlink socket (disabled) [ 1.059034] type=2000 audit(1328810261.058:1): initialized [ 1.092553] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.129890] VFS: Disk quotas dquot_6.5.2 [ 1.129928] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.130317] msgmni has been set to 15966 [ 1.130357] SELinux: Registering netfilter hooks [ 1.130746] alg: No test for stdrng (krng) [ 1.130757] NET: Registered protocol family 38 [ 1.130789] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.130823] io scheduler noop registered [ 1.130825] io scheduler deadline registered [ 1.130849] io scheduler cfq registered (default) [ 1.131097] pcieport 0000:00:02.0: setting latency timer to 64 [ 1.131126] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X [ 1.131222] pcieport 0000:00:06.0: setting latency timer to 64 [ 1.131242] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X [ 1.131320] pcieport 0000:00:07.0: setting latency timer to 64 [ 1.131339] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X [ 1.131403] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.131421] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.131423] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.131677] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.131681] ACPI: Power Button [PWRB] [ 1.131713] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.131715] ACPI: Power Button [PWRF] [ 1.178344] ERST: Table is not found! [ 1.178346] GHES: HEST is not enabled! [ 1.178419] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.199030] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.220167] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.229325] Non-volatile memory driver v1.3 [ 1.229327] Linux agpgart interface v0.103 [ 1.229912] loop: module loaded [ 1.230021] ahci 0000:00:11.0: version 3.0 [ 1.230039] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.230138] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.230141] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.230584] scsi0 : ahci [ 1.230652] scsi1 : ahci [ 1.230707] scsi2 : ahci [ 1.230760] scsi3 : ahci [ 1.230830] ata1: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd00 irq 22 [ 1.230833] ata2: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd80 irq 22 [ 1.230836] ata3: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe00 irq 22 [ 1.230839] ata4: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe80 irq 22 [ 1.230932] Fixed MDIO Bus: probed [ 1.230991] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.231068] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.231079] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.231137] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.231145] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.231163] QUIRK: Enable AMD PLL fix [ 1.231166] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 1.231177] ehci_hcd 0000:00:12.2: debug port 1 [ 1.231196] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbcff800 [ 1.237042] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.237064] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.237066] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.237068] usb usb1: Product: EHCI Host Controller [ 1.237070] usb usb1: Manufacturer: Linux 3.2.3-2.fc16.x86_64 ehci_hcd [ 1.237071] usb usb1: SerialNumber: 0000:00:12.2 [ 1.237163] hub 1-0:1.0: USB hub found [ 1.237166] hub 1-0:1.0: 6 ports detected [ 1.237286] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.237297] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.237340] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.237346] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.237357] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 1.237369] ehci_hcd 0000:00:13.2: debug port 1 [ 1.237387] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbcff400 [ 1.243031] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.243050] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.243052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.243054] usb usb2: Product: EHCI Host Controller [ 1.243055] usb usb2: Manufacturer: Linux 3.2.3-2.fc16.x86_64 ehci_hcd [ 1.243057] usb usb2: SerialNumber: 0000:00:13.2 [ 1.243140] hub 2-0:1.0: USB hub found [ 1.243143] hub 2-0:1.0: 6 ports detected [ 1.243227] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.243294] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.243307] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.243347] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.243368] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbcfd000 [ 1.298061] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.298063] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.298065] usb usb3: Product: OHCI Host Controller [ 1.298067] usb usb3: Manufacturer: Linux 3.2.3-2.fc16.x86_64 ohci_hcd [ 1.298068] usb usb3: SerialNumber: 0000:00:12.0 [ 1.298166] hub 3-0:1.0: USB hub found [ 1.298172] hub 3-0:1.0: 3 ports detected [ 1.298290] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.298301] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.298339] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.298353] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbcfe000 [ 1.353056] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.353058] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.353060] usb usb4: Product: OHCI Host Controller [ 1.353061] usb usb4: Manufacturer: Linux 3.2.3-2.fc16.x86_64 ohci_hcd [ 1.353063] usb usb4: SerialNumber: 0000:00:12.1 [ 1.353165] hub 4-0:1.0: USB hub found [ 1.353171] hub 4-0:1.0: 3 ports detected [ 1.353288] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.353301] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.353339] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.353359] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbcfb000 [ 1.408059] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.408061] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.408063] usb usb5: Product: OHCI Host Controller [ 1.408064] usb usb5: Manufacturer: Linux 3.2.3-2.fc16.x86_64 ohci_hcd [ 1.408066] usb usb5: SerialNumber: 0000:00:13.0 [ 1.408166] hub 5-0:1.0: USB hub found [ 1.408171] hub 5-0:1.0: 3 ports detected [ 1.408288] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.408301] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.408341] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.408355] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbcfc000 [ 1.463054] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.463057] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.463058] usb usb6: Product: OHCI Host Controller [ 1.463060] usb usb6: Manufacturer: Linux 3.2.3-2.fc16.x86_64 ohci_hcd [ 1.463061] usb usb6: SerialNumber: 0000:00:13.1 [ 1.463147] hub 6-0:1.0: USB hub found [ 1.463152] hub 6-0:1.0: 3 ports detected [ 1.463246] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.463259] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.463295] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.463309] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbcfa000 [ 1.518059] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.518062] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.518063] usb usb7: Product: OHCI Host Controller [ 1.518065] usb usb7: Manufacturer: Linux 3.2.3-2.fc16.x86_64 ohci_hcd [ 1.518066] usb usb7: SerialNumber: 0000:00:14.5 [ 1.518165] hub 7-0:1.0: USB hub found [ 1.518171] hub 7-0:1.0: 2 ports detected [ 1.518230] uhci_hcd: USB Universal Host Controller Interface driver [ 1.518280] usbcore: registered new interface driver usbserial [ 1.518288] USB Serial support registered for generic [ 1.535079] ata2: SATA link down (SStatus 0 SControl 300) [ 1.536042] ata4: SATA link down (SStatus 0 SControl 300) [ 1.539043] usb 1-4: new high-speed USB device number 2 using ehci_hcd [ 1.661190] usb 1-4: New USB device found, idVendor=04b8, idProduct=084f [ 1.661192] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.661194] usb 1-4: Product: USB2.0 MFP(Hi-Speed) [ 1.661195] usb 1-4: Manufacturer: EPSON [ 1.661197] usb 1-4: SerialNumber: 4C39534B3037393947 [ 1.690040] ata1: softreset failed (device not ready) [ 1.690080] ata1: applying PMP SRST workaround and retrying [ 1.690097] ata3: softreset failed (device not ready) [ 1.690137] ata3: applying PMP SRST workaround and retrying [ 1.845054] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.845078] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.845818] ata1.00: ATA-8: WDC WD7500AADS-00L5B1, 01.01A01, max UDMA/133 [ 1.845821] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.846656] ata1.00: configured for UDMA/133 [ 1.846677] ata3.00: ATAPI: ATAPI iHAS324 Y, BL1W, max UDMA/100 [ 1.846824] scsi 0:0:0:0: Direct-Access ATA WDC WD7500AADS-0 01.0 PQ: 0 ANSI: 5 [ 1.846953] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.846997] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.847114] sd 0:0:0:0: [sda] Write Protect is off [ 1.847117] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.847156] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.848560] ata3.00: configured for UDMA/100 [ 1.850297] scsi 2:0:0:0: CD-ROM ATAPI iHAS324 Y BL1W PQ: 0 ANSI: 5 [ 1.852452] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.852454] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.852556] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.852639] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.856934] sda: sda1 sda2 [ 1.857282] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.870037] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 1.987333] usb 2-1: New USB device found, idVendor=0846, idProduct=9020 [ 1.987336] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.987338] usb 2-1: Product: Remote Download Wireless Adapter [ 1.987339] usb 2-1: Manufacturer: Broadcom [ 1.987340] usb 2-1: SerialNumber: 113 [ 2.060069] Refined TSC clocksource calibration: 2809.473 MHz. [ 2.060078] Switching to clocksource tsc [ 2.214032] usb 4-3: new full-speed USB device number 2 using ohci_hcd [ 2.363106] usb 4-3: New USB device found, idVendor=413c, idProduct=1003 [ 2.363108] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.363110] usb 4-3: Product: Dell USB Keyboard Hub [ 2.363111] usb 4-3: Manufacturer: Dell [ 2.369119] hub 4-3:1.0: USB hub found [ 2.371105] hub 4-3:1.0: 3 ports detected [ 2.381195] usbcore: registered new interface driver usbserial_generic [ 2.381197] usbserial: USB Serial Driver core [ 2.381225] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 2.381227] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 2.381585] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.381590] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.381677] mousedev: PS/2 mouse device common for all mice [ 2.381820] rtc_cmos 00:03: RTC can wake from S4 [ 2.381909] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.381933] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.381995] device-mapper: uevent: version 1.0.3 [ 2.382050] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.382116] cpuidle: using governor ladder [ 2.382118] cpuidle: using governor menu [ 2.382301] EFI Variables Facility v0.08 2004-May-17 [ 2.382398] usbcore: registered new interface driver usbhid [ 2.382399] usbhid: USB HID core driver [ 2.382440] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.382451] TCP cubic registered [ 2.382452] Initializing XFRM netlink socket [ 2.382540] NET: Registered protocol family 10 [ 2.382673] Mobile IPv6 [ 2.382675] NET: Registered protocol family 17 [ 2.382686] Registering the dns_resolver key type [ 2.382783] PM: Hibernation image not present or could not be loaded. [ 2.382791] registered taskstats version 1 [ 2.401250] Magic number: 0:895:996 [ 2.401337] rtc_cmos 00:03: setting system clock to 2012-02-09 17:57:42 UTC (1328810262) [ 2.401347] powernow-k8: Found 1 AMD Athlon(tm) II X4 630 Processor (4 cpu cores) (version 2.20.00) [ 2.401354] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 2.401355] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 2.401468] Initializing network drop monitor service [ 2.403591] Freeing unused kernel memory: 1596k freed [ 2.403903] Write protecting the kernel read-only data: 10240k [ 2.404167] Freeing unused kernel memory: 52k freed [ 2.408328] Freeing unused kernel memory: 1552k freed [ 2.503550] dracut: dracut-013-20.fc16 [ 2.509578] dracut: rd.luks=0: removing cryptoluks activation [ 2.515635] udevd[153]: starting version 173 [ 2.527375] [drm] Initialized drm 1.1.0 20060810 [ 2.532968] [drm] radeon defaulting to kernel modesetting. [ 2.532970] [drm] radeon kernel modesetting enabled. [ 2.533068] radeon 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.533073] radeon 0000:01:00.0: setting latency timer to 64 [ 2.533214] [drm] initializing kernel modesetting (RV710 0x1002:0x954F 0x1682:0x2920). [ 2.533234] [drm] register mmio base: 0xFBDE0000 [ 2.533236] [drm] register mmio size: 65536 [ 2.533837] ATOM BIOS: BIOS [ 2.533855] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 2.533857] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [ 2.538309] [drm] Detected VRAM RAM=1024M, BAR=256M [ 2.538312] [drm] RAM width 64bits DDR [ 2.538370] [TTM] Zone kernel: Available graphics memory: 4089080 kiB. [ 2.538371] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 2.538373] [TTM] Initializing pool allocator. [ 2.538400] [drm] radeon: 1024M of VRAM memory ready [ 2.538402] [drm] radeon: 512M of GTT memory ready. [ 2.538421] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.538422] [drm] Driver supports precise vblank timestamp query. [ 2.538458] radeon 0000:01:00.0: irq 43 for MSI/MSI-X [ 2.538468] radeon 0000:01:00.0: radeon: using MSI. [ 2.538497] [drm] radeon: irq initialized. [ 2.538501] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 2.539176] [drm] Loading RV710 Microcode [ 2.544302] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 2.544343] radeon 0000:01:00.0: WB enabled [ 2.590592] [drm] ring test succeeded in 1 usecs [ 2.590693] [drm] radeon: ib pool ready. [ 2.590751] [drm] ib test succeeded in 0 usecs [ 2.590959] [drm] Radeon Display Connectors [ 2.590961] [drm] Connector 0: [ 2.590962] [drm] VGA [ 2.590964] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 2.590965] [drm] Encoders: [ 2.590966] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 2.590967] [drm] Connector 1: [ 2.590968] [drm] DIN [ 2.590969] [drm] Encoders: [ 2.590970] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 2.590971] [drm] Connector 2: [ 2.590972] [drm] DVI-I [ 2.590973] [drm] HPD4 [ 2.590975] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c [ 2.590976] [drm] Encoders: [ 2.590977] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 2.590978] [drm] DFP1: INTERNAL_UNIPHY2 [ 2.590994] [drm] Internal thermal controller with fan control [ 2.591036] [drm] radeon: power management initialized [ 2.654104] usb 4-3.1: new full-speed USB device number 3 using ohci_hcd [ 2.674643] [drm] fb mappable at 0xD0142000 [ 2.674645] [drm] vram apper at 0xD0000000 [ 2.674646] [drm] size 5324800 [ 2.674648] [drm] fb depth is 24 [ 2.674649] [drm] pitch is 5888 [ 2.674714] fbcon: radeondrmfb (fb0) is primary device [ 2.748119] usb 4-3.1: New USB device found, idVendor=413c, idProduct=2010 [ 2.748121] usb 4-3.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 2.748123] usb 4-3.1: Product: Dell USB Keyboard [ 2.748125] usb 4-3.1: Manufacturer: Dell [ 2.758280] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3.1/4-3.1:1.0/input/input2 [ 2.758361] generic-usb 0003:413C:2010.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:12.1-3.1/input0 [ 2.768160] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3.1/4-3.1:1.1/input/input3 [ 2.768234] generic-usb 0003:413C:2010.0002: input,hidraw1: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:12.1-3.1/input1 [ 3.082763] Console: switching to colour frame buffer device 180x56 [ 3.086441] fb0: radeondrmfb frame buffer device [ 3.086442] drm: registered panic notifier [ 3.086452] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 [ 3.126357] dracut: Starting plymouth daemon [ 3.153904] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 [ 3.287035] dracut: rd.dm=0: removing DM RAID activation [ 3.289920] dracut: rd.md=0: removing MD RAID activation [ 3.315617] wmi: Mapper loaded [ 3.320063] firewire_ohci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.320072] firewire_ohci 0000:03:00.0: setting latency timer to 64 [ 3.326097] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.326122] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 3.326401] scsi4 : pata_atiixp [ 3.327327] scsi5 : pata_atiixp [ 3.327795] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 3.327797] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 3.342762] Initializing USB Mass Storage driver... [ 3.342898] scsi6 : usb-storage 1-4:1.2 [ 3.342994] usbcore: registered new interface driver usb-storage [ 3.342995] USB Mass Storage support registered. [ 3.373068] firewire_ohci: Added fw-ohci device 0000:03:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11 [ 3.491982] ata5.00: ATA-7: Maxtor 6L200P0, BAH41G10, max UDMA/133 [ 3.491985] ata5.00: 398297088 sectors, multi 16: LBA48 [ 3.499987] ata5.00: configured for UDMA/100 [ 3.500116] scsi 4:0:0:0: Direct-Access ATA Maxtor 6L200P0 BAH4 PQ: 0 ANSI: 5 [ 3.500232] sd 4:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB) [ 3.500251] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 3.500302] sd 4:0:0:0: [sdb] Write Protect is off [ 3.500306] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.500344] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.523420] sdb: sdb1 sdb2 [ 3.523701] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3.666121] dracut: Scanning devices sdb2 for LVM logical volumes vg_greenpc/lv_root vg_greenpc/lv_swap [ 3.674219] dracut: inactive '/dev/vg_greenpc/lv_swap' [9.81 GiB] inherit [ 3.674258] dracut: inactive '/dev/vg_greenpc/lv_home' [129.59 GiB] inherit [ 3.674294] dracut: inactive '/dev/vg_greenpc/lv_root' [50.00 GiB] inherit [ 3.874103] firewire_core: created device fw0: GUID 001e8c0000d24188, S400 [ 4.010368] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 4.089231] dracut: Checking ext4: /dev/mapper/vg_greenpc-lv_root [ 4.089270] dracut: issuing e2fsck -a /dev/mapper/vg_greenpc-lv_root [ 4.156352] dracut: /dev/mapper/vg_greenpc-lv_root: clean, 320956/3276800 files, 3351761/13107200 blocks [ 4.156494] dracut: Remounting /dev/mapper/vg_greenpc-lv_root with -o ro [ 4.163646] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 4.174952] dracut: Mounted root filesystem /dev/mapper/vg_greenpc-lv_root [ 4.344569] scsi 6:0:0:0: Direct-Access EPSON Stylus Storage 1.00 PQ: 0 ANSI: 2 [ 4.344933] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 4.350991] dracut: Switching root [ 4.352293] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 4.759479] type=1404 audit(1328810264.856:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 4.935659] SELinux: 2048 avtab hash slots, 98676 rules. [ 4.949071] SELinux: 2048 avtab hash slots, 98676 rules. [ 5.005795] SELinux: 9 users, 13 roles, 3923 types, 215 bools, 1 sens, 1024 cats [ 5.005798] SELinux: 82 classes, 98676 rules [ 5.008809] SELinux: Completing initialization. [ 5.008811] SELinux: Setting up existing superblocks. [ 5.008817] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 5.008823] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 5.008827] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 5.008833] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 5.008839] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 5.008861] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 5.009310] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 5.009314] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 5.010036] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 5.010040] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 5.010044] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 5.010053] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 5.010059] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 5.010063] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 5.010075] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 5.010082] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 5.010462] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 5.010467] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 5.012093] SELinux: initialized (dev dm-1, type ext4), uses xattr [ 5.014493] type=1403 audit(1328810265.111:3): policy loaded auid=4294967295 ses=4294967295 [ 5.018368] systemd[1]: Successfully loaded SELinux policy in 278ms 660us. [ 5.060807] systemd[1]: Successfully loaded SELinux database in 42ms 180us, size on heap is 480K. [ 5.094400] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 5.095066] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 5.142994] systemd[1]: Relabelled /dev and /run in 47ms 805us. [ 5.169069] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 5.182047] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 5.198044] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 5.198354] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 5.211032] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 5.211346] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 5.223059] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 5.223369] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 5.223442] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora) [ 5.245089] systemd[1]: Set hostname to . [ 6.309628] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 17.900517] udevd[521]: starting version 173 [ 18.488706] ATL1E 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 18.488717] ATL1E 0000:02:00.0: setting latency timer to 64 [ 18.519945] MCE: In-kernel MCE decoding enabled. [ 18.520466] EDAC MC: Ver: 2.1.0 [ 18.521781] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f] [ 18.521784] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 18.522100] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 18.522159] SP5100 TCO timer: mmio address 0xfec000f0 already in use [ 18.527435] AMD64 EDAC driver v3.4.0 [ 18.529043] EDAC amd64: DRAM ECC disabled. [ 18.529050] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 18.529051] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 18.529052] (Note that use of the override may cause unknown side effects.) [ 18.532459] WARNING! power/level is deprecated; use power/control instead [ 18.538131] mtp-probe[677]: checking bus 4, device 3: "/sys/devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3.1" [ 18.540806] mtp-probe[666]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1" [ 18.544658] microcode: CPU0: patch_level=0x01000086 [ 18.779141] mtp-probe[677]: bus: 4, device: 3 was not an MTP device [ 18.869351] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 18.869356] ALSA sound/pci/hda/hda_intel.c:2549 Using LPIB position fix [ 18.876123] ALSA sound/pci/hda/hda_intel.c:1573 Enable sync_write for stable communication [ 18.882740] ALSA sound/pci/hda/hda_codec.c:4951 autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line [ 18.882743] ALSA sound/pci/hda/hda_codec.c:4955 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 18.882745] ALSA sound/pci/hda/hda_codec.c:4959 hp_outs=1 (0x1d/0x0/0x0/0x0/0x0) [ 18.882747] ALSA sound/pci/hda/hda_codec.c:4960 mono: mono_out=0x0 [ 18.882749] ALSA sound/pci/hda/hda_codec.c:4963 dig-out=0x20/0x21 [ 18.882750] ALSA sound/pci/hda/hda_codec.c:4964 inputs: [ 18.882752] ALSA sound/pci/hda/hda_codec.c:4968 Rear Mic=0x1a [ 18.882754] ALSA sound/pci/hda/hda_codec.c:4968 Front Mic=0x1e [ 18.882756] ALSA sound/pci/hda/hda_codec.c:4968 Line=0x1b [ 18.882757] ALSA sound/pci/hda/hda_codec.c:4968 CD=0x1f [ 18.882759] ALSA sound/pci/hda/hda_codec.c:4970 [ 18.895852] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 18.895856] ALSA sound/pci/hda/hda_intel.c:2549 Using LPIB position fix [ 18.895919] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X [ 18.895943] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 18.899095] ALSA sound/pci/hda/hda_intel.c:1573 Enable sync_write for stable communication [ 18.902144] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 18.902239] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input5 [ 18.906942] microcode: CPU1: patch_level=0x01000086 [ 18.908917] microcode: CPU2: patch_level=0x01000086 [ 18.910376] microcode: CPU3: patch_level=0x01000086 [ 18.911961] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 19.203104] udevd[579]: renamed network interface eth0 to p6p1 [ 19.657426] udev-configure-printer[807]: add /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.1 [ 19.657722] udev-configure-printer[807]: device devpath is /devices/pci0000:00/0000:00:12.2/usb1/1-4 [ 19.657749] udev-configure-printer[807]: Device vendor/product is 04B8:084F [ 19.659415] Did not find alt setting 1 for intf 0, config 1 [ 19.661609] udev-configure-printer[807]: MFG:EPSON MDL:Epson Stylus NX210 SERN:- serial:4C39534B3037393947 [ 19.692856] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x084F [ 19.692876] usbcore: registered new interface driver usblp [ 19.696166] udev-configure-printer[810]: add /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.1/usb/lp0 [ 19.779276] mtp-probe[666]: bus: 2, device: 2 was not an MTP device [ 19.932691] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 19.933216] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts [ 19.933513] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts [ 19.933927] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 19.940456] RPC: Registered named UNIX socket transport module. [ 19.940459] RPC: Registered udp transport module. [ 19.940460] RPC: Registered tcp transport module. [ 19.940462] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 19.940685] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts [ 19.984728] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 20.058163] Adding 10289148k swap on /dev/mapper/vg_greenpc-lv_swap. Priority:0 extents:1 across:10289148k [ 20.181186] rmmod[849]: ERROR: Module scsi_wait_scan does not exist in /proc/modules [ 20.281469] systemd-fsck[852]: /dev/sdb1: clean, 248/128016 files, 100915/512000 blocks [ 20.621553] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 20.631827] SELinux: initialized (dev sdb1, type ext4), uses xattr [ 20.793942] udev-configure-printer[807]: failed to connect to CUPS server; giving up [ 20.794518] udev-configure-printer[810]: device devpath is /devices/pci0000:00/0000:00:12.2/usb1/1-4 [ 20.794553] udev-configure-printer[810]: MFG:EPSON MDL:Epson Stylus NX210 SERN:- serial:4C39534B3037393947 [ 20.935641] fedora-storage-init[859]: Setting up Logical Volume Management: 3 logical volume(s) in volume group "vg_greenpc" now active [ 21.018169] fedora-storage-init[859]: [ OK ] [ 21.111734] systemd-fsck[882]: /dev/mapper/vg_greenpc-lv_home: clean, 28139/8495104 files, 2107638/33972224 blocks [ 21.299056] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 21.299064] SELinux: initialized (dev dm-2, type ext4), uses xattr [ 21.394052] fedora-storage-init[885]: Setting up Logical Volume Management: 3 logical volume(s) in volume group "vg_greenpc" now active [ 21.402565] fedora-storage-init[885]: [ OK ] [ 21.503209] lvm[902]: 3 logical volume(s) in volume group "vg_greenpc" monitored [ 21.632206] systemd-tmpfiles[908]: Successfully loaded SELinux database in 10ms 919us, size on heap is 481K. [ 21.796166] udev-configure-printer[810]: failed to connect to CUPS server; giving up [ 21.935548] sandbox[914]: Starting sandbox[ OK ] [ 21.966039] NetworkManager[925]: NetworkManager[925]: NetworkManager (version 0.9.2-1.fc16) is starting... [ 21.966046] NetworkManager[925]: NetworkManager (version 0.9.2-1.fc16) is starting... [ 21.966050] NetworkManager[925]: Read config file /etc/NetworkManager/NetworkManager.conf [ 21.966055] NetworkManager[925]: NetworkManager[925]: Read config file /etc/NetworkManager/NetworkManager.conf [ 21.970436] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 21.971269] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 21.974566] iptables.init[915]: iptables: Applying firewall rules: [ OK ] [ 21.977206] ip6tables.init[919]: ip6tables: Applying firewall rules: [ OK ] [ 22.022504] avahi-daemon[947]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70). [ 22.022555] avahi-daemon[947]: Successfully dropped root privileges. [ 22.022765] avahi-daemon[947]: avahi-daemon 0.6.30 starting up. [ 22.042203] avahi-daemon[947]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns! [ 22.046349] ntpd[958]: ntpd 4.2.6p4@1.2324-o Thu Oct 6 15:37:57 UTC 2011 (1) [ 22.046454] ntpd[958]: proto: precision = 0.079 usec [ 22.046501] ntpd[958]: 0.0.0.0 c01d 0d kern kernel time sync enabled [ 22.046700] ntpd[958]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16 [ 22.046773] ntpd[958]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123 [ 22.048251] ntpd[958]: Listen and drop on 1 v6wildcard :: UDP 123 [ 22.048369] ntpd[958]: Listen normally on 2 lo 127.0.0.1 UDP 123 [ 22.048408] ntpd[958]: Listen normally on 3 lo ::1 UDP 123 [ 22.048432] ntpd[958]: peers refreshed [ 22.048477] ntpd[958]: Listening on routing socket on fd #20 for interface updates [ 22.049438] ntpd[958]: Deferring DNS for 0.fedora.pool.ntp.org 1 [ 22.054574] acpid[960]: starting up with netlink and the input layer [ 22.054741] acpid[960]: skipping incomplete file /etc/acpi/events/videoconf [ 22.054752] acpid[960]: 1 rule loaded [ 22.054817] acpid[960]: waiting for events: event logging is off [ 22.063690] ntpd[958]: Deferring DNS for 1.fedora.pool.ntp.org 1 [ 22.063803] ntpd[958]: Deferring DNS for 2.fedora.pool.ntp.org 1 [ 22.063915] ntpd[958]: Deferring DNS for 3.fedora.pool.ntp.org 1 [ 22.064120] ntpd[958]: 0.0.0.0 c016 06 restart [ 22.064135] ntpd[958]: 0.0.0.0 c012 02 freq_set kernel -10.981 PPM [ 22.064215] ntpd[961]: signal_no_reset: signal 17 had flags 4000000 [ 22.067760] abrtd[959]: Init complete, entering main loop [ 22.182490] /usr/sbin/crond[931]: (CRON) INFO (running with inotify support) [ 22.188445] mcelog[971]: mcelog read: No such device [ 22.695356] ATL1E 0000:02:00.0: irq 45 for MSI/MSI-X [ 22.695549] ATL1E 0000:02:00.0: p6p1: NIC Link is Up <100 Mbps Full Duplex> [ 22.696185] ADDRCONF(NETDEV_UP): p6p1: link is not ready [ 22.696854] ADDRCONF(NETDEV_CHANGE): p6p1: link becomes ready [ 22.699687] Bluetooth: Core ver 2.16 [ 22.699749] NET: Registered protocol family 31 [ 22.699751] Bluetooth: HCI device and connection manager initialized [ 22.699753] Bluetooth: HCI socket layer initialized [ 22.699754] Bluetooth: L2CAP socket layer initialized [ 22.699759] Bluetooth: SCO socket layer initialized [ 22.709768] FS-Cache: Loaded [ 22.713387] FS-Cache: Netfs 'nfs' registered for caching [ 22.717162] SELinux: initialized (dev 0:22, type nfs4), uses genfs_contexts [ 22.720447] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 22.720450] Bluetooth: BNEP filters: protocol multicast [ 22.720695] SELinux: initialized (dev 0:23, type nfs4), uses genfs_contexts [ 22.724150] SELinux: initialized (dev 0:22, type nfs4), uses genfs_contexts [ 22.725976] SELinux: initialized (dev 0:24, type nfs4), uses genfs_contexts [ 27.067746] lp: driver loaded but no devices found [ 27.355949] ppdev: user-space parallel port driver [ 28.306795] usb 1-4: usbfs: interface 1 claimed by usblp while 'colord' sets config #1 [ 29.408145] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 32.978015] p6p1: no IPv6 routers present [ 38.375022] fuse init (API version 7.17) [ 38.381439] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts [ 38.478832] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts [ 46.703429] SELinux: initialized (dev sda2, type fuseblk), uses genfs_contexts [ 46.857283] SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts [ 449.516396] TCP lp registered