[ 0.000000] Linux version 2.6.38-pf2 (root@tinypenguin) (gcc version 4.5.2 (Gentoo 4.5.2 p1.0, pie-0.4.5) ) #2 SMP PREEMPT Mon Apr 4 11:47:45 EDT 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000070000000 (usable) [ 0.000000] BIOS-e820: 0000000070000000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 0000000080000000 - 00000000bfd94000 (usable) [ 0.000000] BIOS-e820: 00000000bfd94000 - 00000000bfdbf000 (reserved) [ 0.000000] BIOS-e820: 00000000bfdbf000 - 00000000bfe57000 (usable) [ 0.000000] BIOS-e820: 00000000bfe57000 - 00000000bfebf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfebf000 - 00000000bfeed000 (usable) [ 0.000000] BIOS-e820: 00000000bfeed000 - 00000000bfeff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (usable) [ 0.000000] BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fa000000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed21000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fef00000 - 00000000fef10000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Hewlett-Packard HP Mini 311-1000/3651, BIOS F.15 04/07/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xbff00 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFF00000 mask 0FFF00000 write-protect [ 0.000000] 1 base 000000000 mask 080000000 write-back [ 0.000000] 2 base 080000000 mask 0C0000000 write-back [ 0.000000] 3 base 0BFF00000 mask 0FFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 3719c000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 36348000 - 3719b4de [ 0.000000] Move RAMDISK from 000000003719c000 - 0000000037fef4dd to 36348000 - 3719b4dd [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP ) [ 0.000000] ACPI: XSDT bfefe120 0005C (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP bfefd000 000F4 (v04 HP SLIC-MPC 00000003 MSFT 01000013) [ 0.000000] ACPI: DSDT bfeef000 09C32 (v01 HP SLIC-MPC F0000000 MSFT 01000013) [ 0.000000] ACPI: FACS bfe61000 00040 [ 0.000000] ACPI: APIC bfefc000 00084 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG bfefb000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: HPET bfefa000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: WDRT bfef9000 00047 (v01 HPQOEM SLIC-MPC 00000000 MSFT 01000013) [ 0.000000] ACPI: SLIC bfeee000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT bfeed000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2183MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bff00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00070000 [ 0.000000] 0: 0x00080000 -> 0x000bfd94 [ 0.000000] 0: 0x000bfdbf -> 0x000bfe57 [ 0.000000] 0: 0x000bfebf -> 0x000bfeed [ 0.000000] 0: 0x000bfeff -> 0x000bff00 [ 0.000000] On node 0 totalpages: 720362 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4367 pages used for memmap [ 0.000000] HighMem zone: 488782 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] 4 Processors exceeds NR_CPUS limit of 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000) [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f4c00000 s25216 r0 d23936 u2097152 [ 0.000000] pcpu-alloc: s25216 r0 d23936 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 714219 [ 0.000000] Kernel command line: splash=quiet,fadein,theme:natural_gentoo vga=845 quit CONSOLE=/dev/tty1 ramdisk=16384 root=/dev/ram0 rdinit=/linuxrc real_root=/dev/vg/root rw [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:000bff00) [ 0.000000] Memory: 2836280k/3144704k available (3954k kernel code, 45168k reserved, 1933k data, 408k init, 1972596k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc15c1000 - 0xc1627000 ( 408 kB) [ 0.000000] .data : 0xc13dcb70 - 0xc15c0080 (1933 kB) [ 0.000000] .text : 0xc1000000 - 0xc13dcb70 (3954 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f4808000 soft=f480a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1600.058 MHz processor. [ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.11 BogoMIPS (lpj=1600058) [ 0.001031] pid_max: default: 32768 minimum: 301 [ 0.001094] Security Framework initialized [ 0.001108] SELinux: Initializing. [ 0.001130] SELinux: Starting in permissive mode [ 0.001152] Mount-cache hash table entries: 512 [ 0.001437] CPU: Physical Processor ID: 0 [ 0.001451] CPU: Processor Core ID: 0 [ 0.001462] mce: CPU supports 5 MCE banks [ 0.001484] CPU0: Thermal monitoring enabled (TM2) [ 0.001500] using mwait in idle threads. [ 0.001686] ACPI: Core revision 20110112 [ 0.019107] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.020401] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.030430] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 0.030997] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. [ 0.030997] ... version: 3 [ 0.030997] ... bit width: 40 [ 0.030997] ... generic registers: 2 [ 0.030997] ... value mask: 000000ffffffffff [ 0.030997] ... max period: 000000007fffffff [ 0.030997] ... fixed-purpose events: 3 [ 0.030997] ... event mask: 0000000700000003 [ 0.032275] NMI watchdog enabled, takes one hw-pmu counter. [ 0.036056] CPU 1 irqstacks, hard=f48aa000 soft=f48ac000 [ 0.036070] Booting Node 0, Processors #1 Ok. [ 0.036035] Initializing CPU#1 [ 0.108043] NMI watchdog enabled, takes one hw-pmu counter. [ 0.108088] Brought up 2 CPUs [ 0.108088] Total of 2 processors activated (6399.60 BogoMIPS). [ 0.108372] kworker/u:0 used greatest stack depth: 7104 bytes left [ 0.110022] print_constraints: dummy: [ 0.110105] Time: 13:22:18 Date: 04/06/11 [ 0.110207] NET: Registered protocol family 16 [ 0.111231] ACPI: bus type pci registered [ 0.112053] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf8000000-0xf9ffffff] (base 0xf8000000) [ 0.112079] PCI: MMCONFIG at [mem 0xf8000000-0xf9ffffff] reserved in E820 [ 0.112094] PCI: Using MMCONFIG for extended config space [ 0.112112] PCI: Using configuration type 1 for base access [ 0.115008] kworker/u:0 used greatest stack depth: 6840 bytes left [ 0.135252] bio: create slab at 0 [ 0.144656] ACPI: EC: Look up EC in DSDT [ 0.153043] ACPI: Executed 1 blocks of module-level executable AML code [ 0.162030] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.163114] ACPI: SSDT bfd97c90 00239 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.165131] ACPI: Dynamic OEM Table Load: [ 0.165152] ACPI: SSDT (null) 00239 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.165458] ACPI: SSDT bfd96e10 001C1 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.167431] ACPI: Dynamic OEM Table Load: [ 0.167449] ACPI: SSDT (null) 001C1 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.173599] ACPI: SSDT bfd97f10 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.175594] ACPI: Dynamic OEM Table Load: [ 0.175612] ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.175893] ACPI: SSDT bfd95f10 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.177860] ACPI: Dynamic OEM Table Load: [ 0.177877] ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.189359] ACPI: Interpreter enabled [ 0.189379] ACPI: (supports S0 S3 S4 S5) [ 0.189456] ACPI: Using IOAPIC for interrupt routing [ 0.245588] ACPI: EC: GPE = 0x27, I/O: command/status = 0x66, data = 0x62 [ 0.247242] ACPI: No dock devices found. [ 0.247259] HEST: Table not found. [ 0.247275] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.247820] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.248454] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.248475] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.248491] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.248510] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] [ 0.248529] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] [ 0.248547] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] [ 0.248565] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] [ 0.248584] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] [ 0.248602] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.248621] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.248639] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] [ 0.248658] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] [ 0.248676] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] [ 0.248694] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] [ 0.248713] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] [ 0.248731] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xf7ffffff] [ 0.248750] pci_root PNP0A08:00: host bridge window [mem 0xfa000000-0xfebfffff] [ 0.248769] pci_root PNP0A08:00: host bridge window [mem 0xfff00000-0xffffffff] [ 0.248807] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000cc000-0x000cffff] conflicts with Video ROM [mem 0x000c0000-0x000cebff] [ 0.248869] pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600 [ 0.249007] pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500 [ 0.249185] pci 0000:00:03.0: [10de:0aae] type 0 class 0x000601 [ 0.249267] pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500 [ 0.249379] pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05 [ 0.249403] pci 0000:00:03.2: reg 10: [io 0x3080-0x30bf] [ 0.249439] pci 0000:00:03.2: reg 20: [io 0x3040-0x307f] [ 0.249453] pci 0000:00:03.2: reg 24: [io 0x3000-0x303f] [ 0.249492] pci 0000:00:03.2: PME# supported from D3hot D3cold [ 0.249503] pci 0000:00:03.2: PME# disabled [ 0.249532] pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500 [ 0.249706] pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40 [ 0.249734] pci 0000:00:03.5: reg 10: [mem 0xfeb80000-0xfebfffff] [ 0.249887] pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03 [ 0.249910] pci 0000:00:04.0: reg 10: [mem 0xd3108000-0xd3108fff] [ 0.250004] pci 0000:00:04.0: supports D1 D2 [ 0.250010] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.250019] pci 0000:00:04.0: PME# disabled [ 0.250051] pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03 [ 0.250970] pci 0000:00:04.1: reg 10: [mem 0xd3109200-0xd31092ff] [ 0.260004] pci 0000:00:04.1: supports D1 D2 [ 0.260012] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.260020] pci 0000:00:04.1: PME# disabled [ 0.260060] pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03 [ 0.260082] pci 0000:00:06.0: reg 10: [mem 0xd3107000-0xd3107fff] [ 0.260150] pci 0000:00:06.0: supports D1 D2 [ 0.260156] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.260164] pci 0000:00:06.0: PME# disabled [ 0.260192] pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03 [ 0.261728] pci 0000:00:06.1: reg 10: [mem 0xd3109100-0xd31091ff] [ 0.271003] pci 0000:00:06.1: supports D1 D2 [ 0.271010] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.271018] pci 0000:00:06.1: PME# disabled [ 0.271058] pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403 [ 0.271080] pci 0000:00:08.0: reg 10: [mem 0xd3100000-0xd3103fff] [ 0.271148] pci 0000:00:08.0: PME# supported from D3hot D3cold [ 0.271156] pci 0000:00:08.0: PME# disabled [ 0.271180] pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604 [ 0.271250] pci 0000:00:0a.0: [10de:0ab0] type 0 class 0x000200 [ 0.271271] pci 0000:00:0a.0: reg 10: [mem 0xd3106000-0xd3106fff] [ 0.271285] pci 0000:00:0a.0: reg 14: [io 0x30e0-0x30e7] [ 0.271298] pci 0000:00:0a.0: reg 18: [mem 0xd3109000-0xd31090ff] [ 0.271311] pci 0000:00:0a.0: reg 1c: [mem 0xd3109300-0xd310930f] [ 0.271357] pci 0000:00:0a.0: supports D1 D2 [ 0.271363] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.271372] pci 0000:00:0a.0: PME# disabled [ 0.271403] pci 0000:00:0b.0: [10de:0ab9] type 0 class 0x000106 [ 0.271427] pci 0000:00:0b.0: reg 10: [io 0x30d8-0x30df] [ 0.271440] pci 0000:00:0b.0: reg 14: [io 0x30ec-0x30ef] [ 0.271453] pci 0000:00:0b.0: reg 18: [io 0x30d0-0x30d7] [ 0.271466] pci 0000:00:0b.0: reg 1c: [io 0x30e8-0x30eb] [ 0.271479] pci 0000:00:0b.0: reg 20: [io 0x30c0-0x30cf] [ 0.271493] pci 0000:00:0b.0: reg 24: [mem 0xd3104000-0xd3105fff] [ 0.272001] pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604 [ 0.272060] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.272068] pci 0000:00:10.0: PME# disabled [ 0.272137] pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604 [ 0.272331] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.272343] pci 0000:00:15.0: PME# disabled [ 0.272432] pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604 [ 0.272625] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.272637] pci 0000:00:16.0: PME# disabled [ 0.272765] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.272786] pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.272795] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.272804] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.272812] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.272822] pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.272832] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.272840] pci 0000:00:09.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode) [ 0.272847] pci 0000:00:09.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode) [ 0.272855] pci 0000:00:09.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode) [ 0.272863] pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.272870] pci 0000:00:09.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.272878] pci 0000:00:09.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.272885] pci 0000:00:09.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.272893] pci 0000:00:09.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.272900] pci 0000:00:09.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.272908] pci 0000:00:09.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode) [ 0.272915] pci 0000:00:09.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode) [ 0.272923] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xf7ffffff] (subtractive decode) [ 0.272931] pci 0000:00:09.0: bridge window [mem 0xfa000000-0xfebfffff] (subtractive decode) [ 0.272939] pci 0000:00:09.0: bridge window [mem 0xfff00000-0xffffffff] (subtractive decode) [ 0.273008] pci 0000:02:00.0: [10de:087f] type 0 class 0x000300 [ 0.273031] pci 0000:02:00.0: reg 10: [mem 0xd2000000-0xd2ffffff] [ 0.273050] pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.273067] pci 0000:02:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.273081] pci 0000:02:00.0: reg 24: [io 0x2000-0x207f] [ 0.273095] pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] [ 0.273162] pci 0000:00:10.0: PCI bridge to [bus 02-02] [ 0.273181] pci 0000:00:10.0: bridge window [io 0x2000-0x2fff] [ 0.273189] pci 0000:00:10.0: bridge window [mem 0xd2000000-0xd2ffffff] [ 0.273200] pci 0000:00:10.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.273454] pci 0000:03:00.0: [14e4:4315] type 0 class 0x000280 [ 0.273519] pci 0000:03:00.0: reg 10: [mem 0xd3000000-0xd3003fff 64bit] [ 0.273775] pci 0000:03:00.0: supports D1 D2 [ 0.276051] pci 0000:00:15.0: PCI bridge to [bus 03-03] [ 0.276081] pci 0000:00:15.0: bridge window [io 0xfffff000-0x0000] (disabled) [ 0.276095] pci 0000:00:15.0: bridge window [mem 0xd3000000-0xd30fffff] [ 0.276115] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.276279] pci 0000:00:16.0: PCI bridge to [bus 04-04] [ 0.276306] pci 0000:00:16.0: bridge window [io 0xfffff000-0x0000] (disabled) [ 0.276320] pci 0000:00:16.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.276341] pci 0000:00:16.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.276385] pci_bus 0000:00: on NUMA node 0 [ 0.276396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.277249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.277642] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.298191] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.298370] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.298540] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.298709] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.299012] ACPI: PCI Interrupt Link [LX0A] (IRQs 16) *0, disabled. [ 0.299282] ACPI: PCI Interrupt Link [LX0B] (IRQs 16) *0, disabled. [ 0.299537] ACPI: PCI Interrupt Link [LX0C] (IRQs 16) *0, disabled. [ 0.299792] ACPI: PCI Interrupt Link [LX0D] (IRQs 16) *0, disabled. [ 0.300079] ACPI: PCI Interrupt Link [LX1A] (IRQs 16) *0, disabled. [ 0.300340] ACPI: PCI Interrupt Link [LX1B] (IRQs 16) *0, disabled. [ 0.300594] ACPI: PCI Interrupt Link [LX1C] (IRQs 16) *0, disabled. [ 0.300849] ACPI: PCI Interrupt Link [LX1D] (IRQs 16) *0, disabled. [ 0.301127] ACPI: PCI Interrupt Link [LX2A] (IRQs 16) *0, disabled. [ 0.301393] ACPI: PCI Interrupt Link [LX2B] (IRQs 16) *0, disabled. [ 0.301647] ACPI: PCI Interrupt Link [LX2C] (IRQs 16) *0, disabled. [ 0.301902] ACPI: PCI Interrupt Link [LX2D] (IRQs 16) *0, disabled. [ 0.302182] ACPI: PCI Interrupt Link [LX3A] (IRQs 16) *11 [ 0.302435] ACPI: PCI Interrupt Link [LX3B] (IRQs 16) *0, disabled. [ 0.302690] ACPI: PCI Interrupt Link [LX3C] (IRQs 16) *0, disabled. [ 0.302945] ACPI: PCI Interrupt Link [LX3D] (IRQs 16) *0, disabled. [ 0.303224] ACPI: PCI Interrupt Link [LX4A] (IRQs 16) *0, disabled. [ 0.303480] ACPI: PCI Interrupt Link [LX4B] (IRQs 16) *0, disabled. [ 0.303736] ACPI: PCI Interrupt Link [LX4C] (IRQs 16) *0, disabled. [ 0.304010] ACPI: PCI Interrupt Link [LX4D] (IRQs 16) *0, disabled. [ 0.304276] ACPI: PCI Interrupt Link [LX5A] (IRQs 16) *0, disabled. [ 0.304533] ACPI: PCI Interrupt Link [LX5B] (IRQs 16) *0, disabled. [ 0.304789] ACPI: PCI Interrupt Link [LX5C] (IRQs 16) *0, disabled. [ 0.305065] ACPI: PCI Interrupt Link [LX5D] (IRQs 16) *0, disabled. [ 0.305328] ACPI: PCI Interrupt Link [LX6A] (IRQs 16) *0, disabled. [ 0.305585] ACPI: PCI Interrupt Link [LX6B] (IRQs 16) *0, disabled. [ 0.305842] ACPI: PCI Interrupt Link [LX6C] (IRQs 16) *0, disabled. [ 0.306123] ACPI: PCI Interrupt Link [LX6D] (IRQs 16) *0, disabled. [ 0.306286] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.306462] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 *10 11 14 15) [ 0.306642] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 10 11 14 15) [ 0.306922] ACPI: PCI Interrupt Link [LUBB] (IRQs 20 21 22 23) *7 [ 0.307118] ACPI: PCI Interrupt Link [LUBC] (IRQs 5 7 10 *11 14 15) [ 0.307390] ACPI: PCI Interrupt Link [LUBD] (IRQs 20 21 22 23) *11 [ 0.307559] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 10 11 14 *15) [ 0.307739] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 10 *11 14 15) [ 0.307905] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.308098] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 10 *11 14 15) [ 0.308272] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 10 *11 14 15) [ 0.308551] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.308823] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.309107] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.309372] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.309631] ACPI: PCI Interrupt Link [AX0A] (IRQs 16) *0, disabled. [ 0.309889] ACPI: PCI Interrupt Link [AX0B] (IRQs 16) *0, disabled. [ 0.310174] ACPI: PCI Interrupt Link [AX0C] (IRQs 16) *0, disabled. [ 0.310432] ACPI: PCI Interrupt Link [AX0D] (IRQs 16) *0, disabled. [ 0.310691] ACPI: PCI Interrupt Link [AX1A] (IRQs 16) *0, disabled. [ 0.310949] ACPI: PCI Interrupt Link [AX1B] (IRQs 16) *0, disabled. [ 0.311228] ACPI: PCI Interrupt Link [AX1C] (IRQs 16) *0, disabled. [ 0.311488] ACPI: PCI Interrupt Link [AX1D] (IRQs 16) *0, disabled. [ 0.311748] ACPI: PCI Interrupt Link [AX2A] (IRQs 16) *0, disabled. [ 0.312030] ACPI: PCI Interrupt Link [AX2B] (IRQs 16) *0, disabled. [ 0.312298] ACPI: PCI Interrupt Link [AX2C] (IRQs 16) *0, disabled. [ 0.312558] ACPI: PCI Interrupt Link [AX2D] (IRQs 16) *0, disabled. [ 0.312818] ACPI: PCI Interrupt Link [AX3A] (IRQs 16) *0 [ 0.313094] ACPI: PCI Interrupt Link [AX3B] (IRQs 16) *0, disabled. [ 0.313363] ACPI: PCI Interrupt Link [AX3C] (IRQs 16) *0, disabled. [ 0.313624] ACPI: PCI Interrupt Link [AX3D] (IRQs 16) *0, disabled. [ 0.313883] ACPI: PCI Interrupt Link [AX4A] (IRQs 16) *0, disabled. [ 0.314169] ACPI: PCI Interrupt Link [AX4B] (IRQs 16) *0, disabled. [ 0.314430] ACPI: PCI Interrupt Link [AX4C] (IRQs 16) *0, disabled. [ 0.314690] ACPI: PCI Interrupt Link [AX4D] (IRQs 16) *0, disabled. [ 0.314951] ACPI: PCI Interrupt Link [AX5A] (IRQs 16) *0, disabled. [ 0.315230] ACPI: PCI Interrupt Link [AX5B] (IRQs 16) *0, disabled. [ 0.315492] ACPI: PCI Interrupt Link [AX5C] (IRQs 16) *0, disabled. [ 0.315753] ACPI: PCI Interrupt Link [AX5D] (IRQs 16) *0, disabled. [ 0.316039] ACPI: PCI Interrupt Link [AX6A] (IRQs 16) *0, disabled. [ 0.316307] ACPI: PCI Interrupt Link [AX6B] (IRQs 16) *0, disabled. [ 0.316569] ACPI: PCI Interrupt Link [AX6C] (IRQs 16) *0, disabled. [ 0.316831] ACPI: PCI Interrupt Link [AX6D] (IRQs 16) *0, disabled. [ 0.317110] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 0.317379] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0 [ 0.317650] ACPI: PCI Interrupt Link [AUBB] (IRQs 20 21 22 23) *0 [ 0.317921] ACPI: PCI Interrupt Link [AUBC] (IRQs 20 21 22 23) *0 [ 0.318216] ACPI: PCI Interrupt Link [AUBD] (IRQs 20 21 22 23) *0 [ 0.318488] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.318761] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.319053] ACPI: PCI Interrupt Link [ASMB] (IRQs 16) *0 [ 0.319331] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.319611] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.319900] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.320135] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.320135] vgaarb: loaded [ 0.321035] SCSI subsystem initialized [ 0.321315] libata version 3.00 loaded. [ 0.321417] usbcore: registered new interface driver usbfs [ 0.322020] usbcore: registered new interface driver hub [ 0.322056] usbcore: registered new device driver usb [ 0.323290] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 0.323290] PCI: Using ACPI for IRQ routing [ 0.323290] PCI: pci_cache_line_size set to 64 bytes [ 0.323310] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.323318] reserve RAM buffer: 00000000bfd94000 - 00000000bfffffff [ 0.323326] reserve RAM buffer: 00000000bfe57000 - 00000000bfffffff [ 0.323334] reserve RAM buffer: 00000000bfeed000 - 00000000bfffffff [ 0.323341] reserve RAM buffer: 00000000bff00000 - 00000000bfffffff [ 0.324209] NetLabel: Initializing [ 0.324209] NetLabel: domain hash size = 128 [ 0.324209] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.324209] NetLabel: unlabeled traffic allowed by default [ 0.324436] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.324462] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31 [ 0.324488] hpet0: 4 comparators, 64-bit 25.000000 MHz counter [ 0.327061] Switching to clocksource hpet [ 0.327658] Switched to NOHz mode on CPU #0 [ 0.327791] Switched to NOHz mode on CPU #1 [ 0.334116] pnp: PnP ACPI init [ 0.334180] ACPI: bus type pnp registered [ 0.335056] pnp 00:00: [bus 00-ff] [ 0.335065] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.335073] pnp 00:00: [io 0x0d00-0xffff window] [ 0.335080] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.335087] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.335093] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.335100] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.335107] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.335113] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.335120] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.335127] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.335133] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.335140] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.335147] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.335153] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.335160] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.335167] pnp 00:00: [mem 0xc0000000-0xf7ffffff window] [ 0.335174] pnp 00:00: [mem 0xfa000000-0xfebfffff window] [ 0.335180] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.335187] pnp 00:00: [mem 0xfff00000-0xffffffff] [ 0.335608] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.335842] pnp 00:01: [io 0x0010-0x001f] [ 0.335850] pnp 00:01: [io 0x0022-0x003f] [ 0.335856] pnp 00:01: [io 0x0044-0x005f] [ 0.335862] pnp 00:01: [io 0x0065-0x006f] [ 0.335868] pnp 00:01: [io 0x0072-0x0080] [ 0.335874] pnp 00:01: [io 0x0090-0x009f] [ 0.335880] pnp 00:01: [io 0x00a2-0x00bf] [ 0.335885] pnp 00:01: [io 0x00e0-0x00ef] [ 0.335891] pnp 00:01: [io 0x0380-0x0387] [ 0.335897] pnp 00:01: [io 0x1500-0x157f] [ 0.335903] pnp 00:01: [io 0x1580-0x15ff] [ 0.335909] pnp 00:01: [io 0x1600-0x167f] [ 0.335915] pnp 00:01: [io 0x1680-0x16ff] [ 0.335921] pnp 00:01: [io 0x1400-0x147f] [ 0.335927] pnp 00:01: [io 0x1480-0x14ff] [ 0.335933] pnp 00:01: [io 0x0400-0x047f] [ 0.335939] pnp 00:01: [io 0x0480-0x04ff] [ 0.335944] pnp 00:01: [io 0x0500-0x057f] [ 0.335950] pnp 00:01: [io 0x0580-0x05ff] [ 0.335956] pnp 00:01: [io 0x0800-0x087f] [ 0.335962] pnp 00:01: [io 0x0880-0x08ff] [ 0.335969] pnp 00:01: [mem 0x00000000-0xffffffff disabled] [ 0.336288] system 00:01: [io 0x0380-0x0387] has been reserved [ 0.336310] system 00:01: [io 0x1500-0x157f] has been reserved [ 0.336326] system 00:01: [io 0x1580-0x15ff] has been reserved [ 0.336342] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.336358] system 00:01: [io 0x1680-0x16ff] has been reserved [ 0.336374] system 00:01: [io 0x1400-0x147f] has been reserved [ 0.336389] system 00:01: [io 0x1480-0x14ff] has been reserved [ 0.336406] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.336421] system 00:01: [io 0x0480-0x04ff] has been reserved [ 0.336437] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.336453] system 00:01: [io 0x0580-0x05ff] has been reserved [ 0.336469] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.336485] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.336504] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.337134] pnp 00:02: [irq 0 disabled] [ 0.337156] pnp 00:02: [irq 8] [ 0.337163] pnp 00:02: [mem 0xfed00000-0xfed003ff] [ 0.337413] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.337461] pnp 00:03: [io 0x0000-0x000f] [ 0.337468] pnp 00:03: [io 0x0081-0x008f] [ 0.337474] pnp 00:03: [io 0x00c0-0x00df] [ 0.337480] pnp 00:03: [dma 4] [ 0.337700] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.337738] pnp 00:04: [io 0x00f0-0x00fe] [ 0.337754] pnp 00:04: [irq 13] [ 0.337982] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.338129] pnp 00:05: [io 0x0070-0x0071] [ 0.338374] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.338413] pnp 00:06: [io 0x0061] [ 0.338641] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.338709] pnp 00:07: [io 0x0060] [ 0.338716] pnp 00:07: [io 0x0064] [ 0.338732] pnp 00:07: [irq 1] [ 0.338961] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.339064] pnp 00:08: [irq 12] [ 0.339303] pnp 00:08: Plug and Play ACPI device, IDs AUI1101 PNP0f13 (active) [ 0.339375] pnp 00:09: [mem 0x00000000-0x0009ffff] [ 0.339383] pnp 00:09: [mem 0x000ec000-0x000fffff] [ 0.339389] pnp 00:09: [mem 0xf8000000-0xf9ffffff] [ 0.339395] pnp 00:09: [mem 0xfec00000-0xfec00fff] [ 0.339402] pnp 00:09: [mem 0xfee00000-0xfee00fff] [ 0.339703] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.339727] system 00:09: [mem 0x000ec000-0x000fffff] could not be reserved [ 0.339745] system 00:09: [mem 0xf8000000-0xf9ffffff] has been reserved [ 0.339762] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.339779] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.339798] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.344614] pnp: PnP ACPI: found 10 devices [ 0.344629] ACPI: ACPI bus type pnp unregistered [ 0.391422] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 0.391514] pci 0000:00:09.0: PCI bridge to [bus 01-01] [ 0.391528] pci 0000:00:09.0: bridge window [io disabled] [ 0.391545] pci 0000:00:09.0: bridge window [mem disabled] [ 0.391561] pci 0000:00:09.0: bridge window [mem pref disabled] [ 0.391587] pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x20000) [ 0.391604] pci 0000:00:10.0: PCI bridge to [bus 02-02] [ 0.391619] pci 0000:00:10.0: bridge window [io 0x2000-0x2fff] [ 0.391637] pci 0000:00:10.0: bridge window [mem 0xd2000000-0xd2ffffff] [ 0.391655] pci 0000:00:10.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.391678] pci 0000:00:15.0: PCI bridge to [bus 03-03] [ 0.391690] pci 0000:00:15.0: bridge window [io disabled] [ 0.391714] pci 0000:00:15.0: bridge window [mem 0xd3000000-0xd30fffff] [ 0.391735] pci 0000:00:15.0: bridge window [mem pref disabled] [ 0.391762] pci 0000:00:16.0: PCI bridge to [bus 04-04] [ 0.391775] pci 0000:00:16.0: bridge window [io disabled] [ 0.391797] pci 0000:00:16.0: bridge window [mem disabled] [ 0.391817] pci 0000:00:16.0: bridge window [mem pref disabled] [ 0.391856] pci 0000:00:09.0: setting latency timer to 64 [ 0.391870] pci 0000:00:10.0: setting latency timer to 64 [ 0.392248] ACPI: PCI Interrupt Link [AX3A] enabled at IRQ 16 [ 0.392289] pci 0000:00:15.0: PCI INT A -> Link[AX3A] -> GSI 16 (level, low) -> IRQ 16 [ 0.392317] pci 0000:00:15.0: setting latency timer to 64 [ 0.392615] ACPI: PCI Interrupt Link [AX4A] enabled at IRQ 16 [ 0.392635] pci 0000:00:16.0: PCI INT A -> Link[AX4A] -> GSI 16 (level, low) -> IRQ 16 [ 0.392662] pci 0000:00:16.0: setting latency timer to 64 [ 0.392674] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.392681] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.392688] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.392695] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.392702] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.392709] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.392716] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.392723] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.392730] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.392737] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] [ 0.392744] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.392751] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.392758] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.392765] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff] [ 0.392772] pci_bus 0000:00: resource 18 [mem 0xc0000000-0xf7ffffff] [ 0.392779] pci_bus 0000:00: resource 19 [mem 0xfa000000-0xfebfffff] [ 0.392786] pci_bus 0000:00: resource 20 [mem 0xfff00000-0xffffffff] [ 0.392794] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.392801] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.392808] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.392814] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.392821] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.392828] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.392835] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.392842] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.392849] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.392856] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff] [ 0.392863] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.392870] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.392877] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.392884] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff] [ 0.392891] pci_bus 0000:01: resource 18 [mem 0xc0000000-0xf7ffffff] [ 0.392898] pci_bus 0000:01: resource 19 [mem 0xfa000000-0xfebfffff] [ 0.392905] pci_bus 0000:01: resource 20 [mem 0xfff00000-0xffffffff] [ 0.392912] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.392919] pci_bus 0000:02: resource 1 [mem 0xd2000000-0xd2ffffff] [ 0.392927] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 0.392934] pci_bus 0000:03: resource 1 [mem 0xd3000000-0xd30fffff] [ 0.393043] NET: Registered protocol family 2 [ 0.393226] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.393932] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.394943] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.395441] TCP: Hash tables configured (established 131072 bind 65536) [ 0.395463] TCP reno registered [ 0.395483] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.395511] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.395770] NET: Registered protocol family 1 [ 0.427073] pci 0000:00:04.1: EHCI: BIOS handoff [ 0.459088] pci 0000:00:06.1: EHCI: BIOS handoff [ 0.470177] pci 0000:02:00.0: Boot video device [ 0.470229] PCI: CLS 64 bytes, default 64 [ 0.470401] Trying to unpack rootfs image as initramfs... [ 1.399061] Freeing initrd memory: 14672k freed [ 1.414649] cpufreq-nforce2: No nForce2 chipset. [ 1.415507] apm: BIOS not found. [ 1.416036] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x212 [ 1.416068] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212 [ 1.416236] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.417146] audit: initializing netlink socket (disabled) [ 1.417195] type=2000 audit(1302096139.416:1): initialized [ 1.418325] highmem bounce pool size: 64 pages [ 1.418350] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.429488] VFS: Disk quotas dquot_6.5.2 [ 1.429762] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.432678] msgmni has been set to 1715 [ 1.433048] SELinux: Registering netfilter hooks [ 1.434084] cryptomgr_test used greatest stack depth: 6448 bytes left [ 1.436520] cryptomgr_test used greatest stack depth: 6340 bytes left [ 1.436603] alg: No test for lzf (lzf-generic) [ 1.436798] alg: No test for stdrng (krng) [ 1.437241] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.437268] io scheduler noop registered [ 1.437488] io scheduler bfq registered (default) [ 1.438542] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.444415] vesafb: framebuffer at 0xd1000000, mapped to 0xf8180000, using 8160k, total 14336k [ 1.444440] vesafb: mode is 1360x768x32, linelength=5440, pages=1 [ 1.444455] vesafb: protected mode interface info at c000:d010 [ 1.444469] vesafb: pmi: set display start = c00cd073, set palette = c00cd0ce [ 1.444483] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 1.444546] vesafb: scrolling: redraw [ 1.444559] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.488554] Console: switching to colour frame buffer device 170x48 [ 1.528718] fb0: VESA VGA frame buffer device [ 1.529122] intel_idle: MWAIT substates: 0x20220 [ 1.529142] intel_idle: v0.4 model 0x1C [ 1.529147] intel_idle: lapic_timer_reliable_states 0x2 [ 1.529163] Marking TSC unstable due to TSC halts in idle states deeper than C2 [ 1.531166] ACPI: AC Adapter [ACAD] (on-line) [ 1.532462] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 1.533397] ACPI: Lid Switch [LID0] [ 1.533895] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 1.534445] ACPI: Sleep Button [SLPB] [ 1.534938] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 1.535493] ACPI: Power Button [PWRB] [ 1.536129] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.536604] ACPI: Power Button [PWRF] [ 1.545236] acpi device:2f: registered as cooling_device0 [ 1.546042] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2e/LNXVIDEO:00/input/input4 [ 1.546669] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no) [ 1.547710] ACPI: acpi_idle yielding to intel_idle [ 1.559348] [Firmware Bug]: Invalid critical threshold (0) [ 1.561507] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.561870] ACPI: Thermal Zone [TZ0] (56 C) [ 1.563658] ERST: Table is not found! [ 1.579136] Non-volatile memory driver v1.3 [ 1.579917] ACPI: Battery Slot [BAT0] (battery present) [ 1.607749] [drm] Initialized drm 1.1.0 20060810 [ 1.628086] brd: module loaded [ 1.645288] loop: module loaded [ 1.659646] ahci 0000:00:0b.0: version 3.0 [ 1.660110] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 1.673888] ahci 0000:00:0b.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 1.688213] ahci 0000:00:0b.0: irq 40 for MSI/MSI-X [ 1.688227] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP [ 1.702492] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x1 impl SATA mode [ 1.716955] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part [ 1.731306] ahci 0000:00:0b.0: setting latency timer to 64 [ 1.734874] scsi0 : ahci [ 1.749413] scsi1 : ahci [ 1.763695] scsi2 : ahci [ 1.777840] scsi3 : ahci [ 1.791764] scsi4 : ahci [ 1.805364] scsi5 : ahci [ 1.818883] ata1: SATA max UDMA/133 abar m8192@0xd3104000 port 0xd3104100 irq 40 [ 1.832083] ata2: DUMMY [ 1.845047] ata3: DUMMY [ 1.845052] ata4: DUMMY [ 1.845057] ata5: DUMMY [ 1.845061] ata6: DUMMY [ 1.846115] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.846651] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 1.846691] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 1.846704] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 2.150040] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.163288] ata1.00: ATA-8: Hitachi HTS545016B9A300, PBBOCA0G, max UDMA/100 [ 2.175791] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.189094] ata1.00: configured for UDMA/100 [ 2.201420] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54501 PBBO PQ: 0 ANSI: 5 [ 2.214361] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.214700] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.238706] sd 0:0:0:0: [sda] Write Protect is off [ 2.250398] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.250487] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.369521] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:26:9e:35:8b:f6 [ 2.381432] forcedeth 0000:00:0a.0: highdma csum pwrctl lnktim msi desc-v3 [ 2.393854] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.405542] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 [ 2.406059] ACPI: PCI Interrupt Link [AUBB] enabled at IRQ 21 [ 2.417556] ehci_hcd 0000:00:04.1: PCI INT B -> Link[AUBB] -> GSI 21 (level, low) -> IRQ 21 [ 2.429276] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 2.429285] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 2.440818] drivers/usb/core/inode.c: creating file 'devices' [ 2.440833] drivers/usb/core/inode.c: creating file '001' [ 2.441090] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 [ 2.456036] ehci_hcd 0000:00:04.1: reset hcs_params 0x101c85 dbg=1 cc=1 pcc=12 !ppc ports=5 [ 2.456049] ehci_hcd 0000:00:04.1: reset portroute 0 0 0 0 0 [ 2.456057] ehci_hcd 0000:00:04.1: reset hcc_params a086 caching frame 256/512/1024 park [ 2.456101] ehci_hcd 0000:00:04.1: park 0 [ 2.456115] ehci_hcd 0000:00:04.1: debug port 1 [ 2.467625] ehci_hcd 0000:00:04.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 2.467642] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 2.467648] ehci_hcd 0000:00:04.1: supports USB remote wakeup [ 2.467687] ehci_hcd 0000:00:04.1: irq 21, io mem 0xd3109200 [ 2.479233] ehci_hcd 0000:00:04.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 2.479248] ehci_hcd 0000:00:04.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 2.485038] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 2.496575] usb usb1: default language 0x0409 [ 2.496595] usb usb1: udev 1, busnum 1, minor = 0 [ 2.496602] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.508225] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.519918] usb usb1: Product: EHCI Host Controller [ 2.531644] usb usb1: Manufacturer: Linux 2.6.38-pf2 ehci_hcd [ 2.543398] usb usb1: SerialNumber: 0000:00:04.1 [ 2.555174] usb usb1: usb_probe_device [ 2.555183] usb usb1: configuration #1 chosen from 1 choice [ 2.555206] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 2.555364] hub 1-0:1.0: usb_probe_interface [ 2.555372] hub 1-0:1.0: usb_probe_interface - got id [ 2.555380] hub 1-0:1.0: USB hub found [ 2.566755] hub 1-0:1.0: 5 ports detected [ 2.577920] hub 1-0:1.0: standalone hub [ 2.577925] hub 1-0:1.0: no power switching (usb 1.0) [ 2.577931] hub 1-0:1.0: individual port over-current protection [ 2.577937] hub 1-0:1.0: power on to power good time: 20ms [ 2.577951] hub 1-0:1.0: local power source is good [ 2.577958] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 2.578061] drivers/usb/core/inode.c: creating file '001' [ 2.578599] ACPI: PCI Interrupt Link [AUBD] enabled at IRQ 20 [ 2.589923] ehci_hcd 0000:00:06.1: PCI INT B -> Link[AUBD] -> GSI 20 (level, low) -> IRQ 20 [ 2.601463] sda: sda1 sda2 sda3 [ 2.601508] ehci_hcd 0000:00:06.1: setting latency timer to 64 [ 2.601517] ehci_hcd 0000:00:06.1: EHCI Host Controller [ 2.601545] drivers/usb/core/inode.c: creating file '002' [ 2.601847] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2 [ 2.638199] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.651046] ehci_hcd 0000:00:06.1: reset hcs_params 0x101c83 dbg=1 cc=1 pcc=12 !ppc ports=3 [ 2.651057] ehci_hcd 0000:00:06.1: reset portroute 0 0 0 [ 2.651065] ehci_hcd 0000:00:06.1: reset hcc_params a086 caching frame 256/512/1024 park [ 2.651109] ehci_hcd 0000:00:06.1: park 0 [ 2.651124] ehci_hcd 0000:00:06.1: debug port 1 [ 2.663629] ehci_hcd 0000:00:06.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 2.663644] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported [ 2.663650] ehci_hcd 0000:00:06.1: supports USB remote wakeup [ 2.663691] ehci_hcd 0000:00:06.1: irq 20, io mem 0xd3109100 [ 2.676070] ehci_hcd 0000:00:06.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 2.676085] ehci_hcd 0000:00:06.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 2.677070] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0000 [ 2.682029] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00 [ 2.694281] usb usb2: default language 0x0409 [ 2.694302] usb usb2: udev 1, busnum 2, minor = 128 [ 2.694308] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.706881] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.719707] usb usb2: Product: EHCI Host Controller [ 2.732674] usb usb2: Manufacturer: Linux 2.6.38-pf2 ehci_hcd [ 2.745897] usb usb2: SerialNumber: 0000:00:06.1 [ 2.759194] usb usb2: usb_probe_device [ 2.759203] usb usb2: configuration #1 chosen from 1 choice [ 2.759226] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 2.759391] hub 2-0:1.0: usb_probe_interface [ 2.759398] hub 2-0:1.0: usb_probe_interface - got id [ 2.759405] hub 2-0:1.0: USB hub found [ 2.772259] hub 2-0:1.0: 3 ports detected [ 2.784828] hub 2-0:1.0: standalone hub [ 2.784834] hub 2-0:1.0: no power switching (usb 1.0) [ 2.784839] hub 2-0:1.0: individual port over-current protection [ 2.784846] hub 2-0:1.0: power on to power good time: 20ms [ 2.784859] hub 2-0:1.0: local power source is good [ 2.784866] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 2.784937] drivers/usb/core/inode.c: creating file '001' [ 2.785224] uhci_hcd: USB Universal Host Controller Interface driver [ 2.798236] usbcore: registered new interface driver usblp [ 2.810930] usbcore: registered new interface driver libusual [ 2.823541] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.852109] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.864581] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.877214] mousedev: PS/2 mouse device common for all mice [ 2.889397] ehci_hcd 0000:00:06.1: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 2.889414] hub 2-0:1.0: port 1: status 0501 change 0001 [ 2.889439] ehci_hcd 0000:00:06.1: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT [ 2.889452] hub 2-0:1.0: port 2: status 0501 change 0001 [ 2.890555] rtc_cmos 00:05: RTC can wake from S4 [ 2.904313] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 2.917335] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.929897] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 2.942929] i2c i2c-0: nForce2 SMBus adapter at 0x3040 [ 2.955440] i2c i2c-1: nForce2 SMBus adapter at 0x3000 [ 2.968480] Linux video capture interface: v2.00 [ 2.981175] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 2.994056] hub 2-0:1.0: state 7 ports 3 chg 0006 evt 0000 [ 2.994081] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 2.994567] cpuidle: using governor ladder [ 3.009253] cpuidle: using governor menu [ 3.023924] usbcore: registered new interface driver usbhid [ 3.036154] usbhid: USB HID core driver [ 3.048397] ehci_hcd 0000:00:06.1: port 1 full speed --> companion [ 3.048416] ehci_hcd 0000:00:06.1: GetStatus port:1 status 003001 0 ACK POWER OWNER sig=se0 CONNECT [ 3.048449] hub 2-0:1.0: port 1 not reset yet, waiting 50ms [ 3.050058] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 3.062363] HDA Intel 0000:00:08.0: PCI INT A -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 3.074964] hda_intel: Disable MSI for Nvidia chipset [ 3.087488] HDA Intel 0000:00:08.0: setting latency timer to 64 [ 3.099101] ehci_hcd 0000:00:06.1: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 3.099160] hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 3.150300] ehci_hcd 0000:00:06.1: port 2 high speed [ 3.150312] ehci_hcd 0000:00:06.1: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 3.201093] usb 2-2: new high speed USB device using ehci_hcd and address 3 [ 3.265322] ehci_hcd 0000:00:06.1: port 2 high speed [ 3.265334] ehci_hcd 0000:00:06.1: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 3.341527] usb 2-2: skipped 1 descriptor after configuration [ 3.341543] usb 2-2: skipped 6 descriptors after interface [ 3.341559] usb 2-2: skipped 1 descriptor after endpoint [ 3.341582] usb 2-2: skipped 9 descriptors after interface [ 3.342266] usb 2-2: default language 0x0409 [ 3.347271] usb 2-2: udev 3, busnum 2, minor = 130 [ 3.347286] usb 2-2: New USB device found, idVendor=0408, idProduct=0ff1 [ 3.360025] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 3.372830] usb 2-2: Product: HP Webcam-50 [ 3.385594] usb 2-2: Manufacturer: QCM [ 3.398202] usb 2-2: SerialNumber: SN001 [ 3.410822] usb 2-2: usb_probe_device [ 3.410831] usb 2-2: configuration #1 chosen from 1 choice [ 3.411286] usb 2-2: adding 2-2:1.0 (config #1, interface 0) [ 3.413283] usb 2-2: adding 2-2:1.1 (config #1, interface 1) [ 3.413469] drivers/usb/core/inode.c: creating file '003' [ 3.413539] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0002 [ 3.537557] input: HDA NVidia Mic at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input6 [ 3.550778] input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input7 [ 3.577480] ALSA device list: [ 3.590316] #0: HDA NVidia at 0xd3100000 irq 23 [ 3.603208] Netfilter messages via NETLINK v0.30. [ 3.616908] TCP cubic registered [ 3.629683] Initializing XFRM netlink socket [ 3.642555] NET: Registered protocol family 17 [ 3.655278] Registering the dns_resolver key type [ 3.670046] Using IPI No-Shortcut mode [ 3.683340] TuxOnIce 3.2-rc2 (http://tuxonice.net) [ 3.708843] TuxOnIce: No image found. [ 3.733964] PM: Checking hibernation image partition /dev/sda2 [ 3.733987] PM: Hibernation image partition 8:2 present [ 3.733992] PM: Looking for hibernation image. [ 3.735098] PM: Image not found (code -22) [ 3.735107] PM: Hibernation image not present or could not be loaded. [ 3.735753] Magic number: 7:637:381 [ 3.750804] Freeing unused kernel memory: 408k freed [ 3.764276] Write protecting the kernel text: 3956k [ 3.776956] Write protecting the kernel read-only data: 1492k [ 3.789382] BFS CPU scheduler v0.363 by Con Kolivas. [ 4.203583] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input8 [ 4.708125] hub 1-0:1.0: hub_suspend [ 4.708153] usb usb1: bus auto-suspend [ 4.708166] ehci_hcd 0000:00:04.1: suspend root hub [ 64.800341] EXT4-fs (dm-1): warning: maximal mount count reached, running e2fsck is recommended [ 64.889874] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 289278 [ 64.912843] EXT4-fs (dm-1): 1 orphan inode deleted [ 64.924879] EXT4-fs (dm-1): recovery complete [ 64.972145] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: [ 64.984223] exe used greatest stack depth: 5900 bytes left [ 70.610001] <30>udev[1198]: starting version 167 [ 70.886294] udevadm used greatest stack depth: 5848 bytes left [ 70.946362] wmi: Mapper loaded [ 71.745456] uvcvideo 2-2:1.0: usb_probe_interface [ 71.745466] uvcvideo 2-2:1.0: usb_probe_interface - got id [ 71.745500] uvcvideo: Found UVC 1.00 device HP Webcam-50 (0408:0ff1) [ 71.749450] input: HP Webcam-50 as /devices/pci0000:00/0000:00:06.1/usb2/2-2/2-2:1.0/input/input9 [ 71.749669] usbcore: registered new interface driver uvcvideo [ 71.749678] USB Video Class driver (v1.0.0) [ 71.814408] usb 2-2: link qh4-0001/f4a3d540 start 1 [1/0 us] [ 71.814553] usb 2-2: unlink qh4-0001/f4a3d540 start 1 [1/0 us] [ 72.411260] input: HP WMI hotkeys as /devices/virtual/input/input10 [ 73.214946] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[AX3A] -> GSI 16 (level, low) -> IRQ 16 [ 73.215083] b43-pci-bridge 0000:03:00.0: setting latency timer to 64 [ 73.223171] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243) [ 73.223190] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243) [ 73.223207] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243) [ 73.223223] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243) [ 73.231100] ssb: chipcommon status is 0x12 [ 73.231113] ssb: Found rev 1 PMU (capabilities 0x02A62F01) [ 73.231125] ssb: SPROM offset is 0x800 [ 73.232624] ssb: SPROM revision 8 detected. [ 73.240230] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 73.264046] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 73.474396] cfg80211: Calling CRDA to update world regulatory domain [ 73.534375] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 73.534385] ohci_hcd: block sizes: ed 64 td 64 [ 73.535000] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 22 [ 73.535045] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AUBA] -> GSI 22 (level, low) -> IRQ 22 [ 73.535109] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 73.535120] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 73.535148] drivers/usb/core/inode.c: creating file '003' [ 73.535352] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3 [ 73.538046] ohci_hcd 0000:00:04.0: enabled nVidia shutdown quirk [ 73.538126] ohci_hcd 0000:00:04.0: created debug files [ 73.538135] ohci_hcd 0000:00:04.0: supports USB remote wakeup [ 73.538190] ohci_hcd 0000:00:04.0: irq 22, io mem 0xd3108000 [ 73.591067] ohci_hcd 0000:00:04.0: OHCI controller state [ 73.591082] ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers [ 73.591095] ohci_hcd 0000:00:04.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 73.591106] ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0 [ 73.591116] ohci_hcd 0000:00:04.0: intrstatus 0x00000004 SF [ 73.591128] ohci_hcd 0000:00:04.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 73.591139] ohci_hcd 0000:00:04.0: hcca frame #0003 [ 73.591152] ohci_hcd 0000:00:04.0: roothub.a 01001205 POTPGT=1 NOCP NPS NDP=5(5) [ 73.591162] ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 73.591173] ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE [ 73.591185] ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00000100 PPS [ 73.591197] ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS [ 73.591209] ohci_hcd 0000:00:04.0: roothub.portstatus [2] 0x00000100 PPS [ 73.591221] ohci_hcd 0000:00:04.0: roothub.portstatus [3] 0x00000100 PPS [ 73.591233] ohci_hcd 0000:00:04.0: roothub.portstatus [4] 0x00000100 PPS [ 73.591283] usb usb3: default language 0x0409 [ 73.591312] usb usb3: udev 1, busnum 3, minor = 256 [ 73.591322] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 73.591331] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 73.591340] usb usb3: Product: OHCI Host Controller [ 73.591349] usb usb3: Manufacturer: Linux 2.6.38-pf2 ohci_hcd [ 73.591356] usb usb3: SerialNumber: 0000:00:04.0 [ 73.591603] usb usb3: usb_probe_device [ 73.591614] usb usb3: configuration #1 chosen from 1 choice [ 73.591641] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 73.591759] hub 3-0:1.0: usb_probe_interface [ 73.591767] hub 3-0:1.0: usb_probe_interface - got id [ 73.591777] hub 3-0:1.0: USB hub found [ 73.591796] hub 3-0:1.0: 5 ports detected [ 73.591803] hub 3-0:1.0: standalone hub [ 73.591810] hub 3-0:1.0: no power switching (usb 1.0) [ 73.591817] hub 3-0:1.0: no over-current protection [ 73.591825] hub 3-0:1.0: power on to power good time: 2ms [ 73.591843] hub 3-0:1.0: local power source is good [ 73.591851] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 73.591944] drivers/usb/core/inode.c: creating file '001' [ 73.592099] ehci_hcd 0000:00:04.1: HS companion for 0000:00:04.0 [ 73.592757] ACPI: PCI Interrupt Link [AUBC] enabled at IRQ 21 [ 73.592774] ohci_hcd 0000:00:06.0: PCI INT A -> Link[AUBC] -> GSI 21 (level, low) -> IRQ 21 [ 73.592838] ohci_hcd 0000:00:06.0: setting latency timer to 64 [ 73.592849] ohci_hcd 0000:00:06.0: OHCI Host Controller [ 73.592873] drivers/usb/core/inode.c: creating file '004' [ 73.593085] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4 [ 73.597046] ohci_hcd 0000:00:06.0: enabled nVidia shutdown quirk [ 73.597113] ohci_hcd 0000:00:06.0: created debug files [ 73.597123] ohci_hcd 0000:00:06.0: supports USB remote wakeup [ 73.597149] ohci_hcd 0000:00:06.0: irq 21, io mem 0xd3107000 [ 73.650122] ohci_hcd 0000:00:06.0: OHCI controller state [ 73.650132] ohci_hcd 0000:00:06.0: OHCI 1.0, NO legacy support registers [ 73.650142] ohci_hcd 0000:00:06.0: control 0x683 RWE RWC HCFS=operational CBSR=3 [ 73.650150] ohci_hcd 0000:00:06.0: cmdstatus 0x00000 SOC=0 [ 73.650158] ohci_hcd 0000:00:06.0: intrstatus 0x00000044 RHSC SF [ 73.650166] ohci_hcd 0000:00:06.0: intrenable 0x8000001a MIE UE RD WDH [ 73.650176] ohci_hcd 0000:00:06.0: hcca frame #0003 [ 73.650185] ohci_hcd 0000:00:06.0: roothub.a 01001203 POTPGT=1 NOCP NPS NDP=3(3) [ 73.650193] ohci_hcd 0000:00:06.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 73.650200] ohci_hcd 0000:00:06.0: roothub.status 00008000 DRWE [ 73.650209] ohci_hcd 0000:00:06.0: roothub.portstatus [0] 0x00010101 CSC PPS CCS [ 73.650219] ohci_hcd 0000:00:06.0: roothub.portstatus [1] 0x00000100 PPS [ 73.650228] ohci_hcd 0000:00:06.0: roothub.portstatus [2] 0x00000100 PPS [ 73.650267] usb usb4: default language 0x0409 [ 73.650287] usb usb4: udev 1, busnum 4, minor = 384 [ 73.650294] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 73.650301] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 73.650308] usb usb4: Product: OHCI Host Controller [ 73.650313] usb usb4: Manufacturer: Linux 2.6.38-pf2 ohci_hcd [ 73.650319] usb usb4: SerialNumber: 0000:00:06.0 [ 73.650525] usb usb4: usb_probe_device [ 73.650537] usb usb4: configuration #1 chosen from 1 choice [ 73.650562] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 73.650682] hub 4-0:1.0: usb_probe_interface [ 73.650691] hub 4-0:1.0: usb_probe_interface - got id [ 73.650701] hub 4-0:1.0: USB hub found [ 73.650722] hub 4-0:1.0: 3 ports detected [ 73.650730] hub 4-0:1.0: standalone hub [ 73.650737] hub 4-0:1.0: no power switching (usb 1.0) [ 73.650745] hub 4-0:1.0: no over-current protection [ 73.650754] hub 4-0:1.0: power on to power good time: 2ms [ 73.650774] hub 4-0:1.0: local power source is good [ 73.650783] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 73.650879] drivers/usb/core/inode.c: creating file '001' [ 73.651111] ehci_hcd 0000:00:06.1: HS companion for 0000:00:06.0 [ 73.691164] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0000 [ 73.750097] ohci_hcd 0000:00:06.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS [ 73.750112] hub 4-0:1.0: port 1: status 0101 change 0001 [ 73.850059] hub 4-0:1.0: state 7 ports 3 chg 0002 evt 0000 [ 73.850086] hub 4-0:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 73.956056] ohci_hcd 0000:00:06.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS [ 74.000156] usb 2-2: usb auto-suspend [ 74.007062] usb 4-1: new full speed USB device using ohci_hcd and address 2 [ 74.068464] b43-phy0: Broadcom 4312 WLAN found (core revision 15) [ 74.083088] b43-phy0 debug: Found PHY: Analog 6, Type 5, Revision 1 [ 74.083106] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2062, Revision 2 [ 74.098474] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 74.098487] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 74.098497] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 74.098508] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 74.098517] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 74.098528] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 74.098537] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 74.098547] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 74.098556] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 74.098567] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 74.098576] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 74.098586] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 74.098596] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 74.098606] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 74.098616] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 74.098624] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 74.098630] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 74.098638] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 74.098644] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 74.098651] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 74.098658] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 74.098665] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 74.098672] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 74.098679] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm) [ 74.098686] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 74.098693] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm) [ 74.098700] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 74.098707] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm) [ 74.108266] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 74.109327] Registered led device: b43-phy0::tx [ 74.109389] Registered led device: b43-phy0::rx [ 74.109451] Registered led device: b43-phy0::radio [ 74.109494] Broadcom 43xx driver loaded [ Features: PNLS, Firmware-ID: FW13 ] [ 74.115062] ohci_hcd 0000:00:06.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS [ 74.181064] usb 4-1: ep0 maxpacket = 8 [ 74.201110] usb 4-1: default language 0x0409 [ 74.207128] usb 4-1: udev 2, busnum 4, minor = 385 [ 74.207140] usb 4-1: New USB device found, idVendor=0a5c, idProduct=4500 [ 74.207151] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 74.207161] usb 4-1: Product: BCM2046B1 [ 74.207170] usb 4-1: Manufacturer: Broadcom [ 74.207441] usb 4-1: usb_probe_device [ 74.207454] usb 4-1: configuration #1 chosen from 1 choice [ 74.210108] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 74.210251] hub 4-1:1.0: usb_probe_interface [ 74.210262] hub 4-1:1.0: usb_probe_interface - got id [ 74.210273] hub 4-1:1.0: USB hub found [ 74.213102] hub 4-1:1.0: 3 ports detected [ 74.213114] hub 4-1:1.0: compound device; port removable status: FFF [ 74.213122] hub 4-1:1.0: ganged power switching [ 74.213130] hub 4-1:1.0: global over-current protection [ 74.213140] hub 4-1:1.0: power on to power good time: 100ms [ 74.218618] hub 4-1:1.0: hub controller current requirement: 100mA [ 74.218629] hub 4-1:1.0: 100mA bus power budget for each child [ 74.220100] hub 4-1:1.0: no over-current condition exists [ 74.220109] hub 4-1:1.0: enabling power on all ports [ 74.229197] drivers/usb/core/inode.c: creating file '002' [ 74.229305] hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0002 [ 74.268306] nvidia: module license 'NVIDIA' taints kernel. [ 74.268320] Disabling lock debugging due to kernel taint [ 74.331123] hub 4-1:1.0: port 1: status 0101 change 0001 [ 74.341108] hub 4-1:1.0: port 2: status 0101 change 0001 [ 74.347117] hub 4-1:1.0: port 3: status 0101 change 0001 [ 74.450074] hub 4-1:1.0: state 7 ports 3 chg 000e evt 0000 [ 74.452095] hub 4-1:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 74.519099] usb 4-1.1: new full speed USB device using ohci_hcd and address 3 [ 74.601033] usb 4-1.1: ep0 maxpacket = 8 [ 74.617109] usb 4-1.1: skipped 1 descriptor after interface [ 74.617124] usb 4-1.1: udev 3, busnum 4, minor = 386 [ 74.617135] usb 4-1.1: New USB device found, idVendor=0a5c, idProduct=4502 [ 74.617145] usb 4-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 74.617405] usb 4-1.1: usb_probe_device [ 74.617418] usb 4-1.1: configuration #1 chosen from 1 choice [ 74.626163] usb 4-1.1: adding 4-1.1:1.0 (config #1, interface 0) [ 74.626532] usbhid 4-1.1:1.0: usb_probe_interface [ 74.626544] usbhid 4-1.1:1.0: usb_probe_interface - got id [ 74.635338] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1.1/4-1.1:1.0/input/input11 [ 74.635620] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:06.0-1.1/input0 [ 74.635706] drivers/usb/core/inode.c: creating file '003' [ 74.635798] hub 4-1:1.0: 398mA power budget left [ 74.637097] hub 4-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 74.704096] usb 4-1.2: new full speed USB device using ohci_hcd and address 4 [ 74.750031] ohci_hcd 0000:00:04.0: auto-stop root hub [ 74.786035] usb 4-1.2: ep0 maxpacket = 8 [ 74.802091] usb 4-1.2: skipped 1 descriptor after interface [ 74.802106] usb 4-1.2: udev 4, busnum 4, minor = 387 [ 74.802115] usb 4-1.2: New USB device found, idVendor=0a5c, idProduct=4503 [ 74.802126] usb 4-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 74.802386] usb 4-1.2: usb_probe_device [ 74.802397] usb 4-1.2: configuration #1 chosen from 1 choice [ 74.805102] usb 4-1.2: adding 4-1.2:1.0 (config #1, interface 0) [ 74.805262] usbhid 4-1.2:1.0: usb_probe_interface [ 74.805273] usbhid 4-1.2:1.0: usb_probe_interface - got id [ 74.813368] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input12 [ 74.813729] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:06.0-1.2/input0 [ 74.813816] drivers/usb/core/inode.c: creating file '004' [ 74.813916] hub 4-1:1.0: 396mA power budget left [ 74.815101] hub 4-1:1.0: port 3, status 0101, change 0000, 12 Mb/s [ 74.882091] usb 4-1.3: new full speed USB device using ohci_hcd and address 5 [ 74.983103] usb 4-1.3: skipped 1 descriptor after interface [ 74.986087] usb 4-1.3: default language 0x0409 [ 74.995100] usb 4-1.3: udev 5, busnum 4, minor = 388 [ 74.995112] usb 4-1.3: New USB device found, idVendor=0a5c, idProduct=2148 [ 74.995123] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 74.995133] usb 4-1.3: Product: BCM92046DG-CL1ROM [ 74.995141] usb 4-1.3: Manufacturer: Broadcom Corp [ 74.995150] usb 4-1.3: SerialNumber: 000272A915BF [ 74.995418] usb 4-1.3: usb_probe_device [ 74.995431] usb 4-1.3: configuration #1 chosen from 1 choice [ 74.998125] usb 4-1.3: adding 4-1.3:1.0 (config #1, interface 0) [ 74.998483] usb 4-1.3: adding 4-1.3:1.1 (config #1, interface 1) [ 74.998731] usb 4-1.3: adding 4-1.3:1.2 (config #1, interface 2) [ 74.998976] usb 4-1.3: adding 4-1.3:1.3 (config #1, interface 3) [ 74.999133] drivers/usb/core/inode.c: creating file '005' [ 74.999236] hub 4-1:1.0: 394mA power budget left [ 75.007053] hub 4-1:1.0: state 7 ports 3 chg 0000 evt 0008 [ 75.282738] Bluetooth: Core ver 2.15 [ 75.283073] NET: Registered protocol family 31 [ 75.283081] Bluetooth: HCI device and connection manager initialized [ 75.283091] Bluetooth: HCI socket layer initialized [ 75.462968] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 75.463057] btusb 4-1.3:1.0: usb_probe_interface [ 75.463068] btusb 4-1.3:1.0: usb_probe_interface - got id [ 75.463579] btusb 4-1.3:1.2: usb_probe_interface [ 75.463590] btusb 4-1.3:1.2: usb_probe_interface - got id [ 75.463623] btusb 4-1.3:1.3: usb_probe_interface [ 75.463633] btusb 4-1.3:1.3: usb_probe_interface - got id [ 75.463708] usbcore: registered new interface driver btusb [ 76.000046] hub 3-0:1.0: hub_suspend [ 76.000067] usb usb3: bus auto-suspend [ 76.000077] ohci_hcd 0000:00:04.0: suspend root hub [ 76.011033] hub 2-0:1.0: hub_suspend [ 76.011047] usb usb2: bus auto-suspend [ 76.011056] ehci_hcd 0000:00:06.1: suspend root hub [ 80.800911] ACPI: PCI Interrupt Link [APMU] enabled at IRQ 20 [ 80.800925] nvidia 0000:00:03.5: PCI INT B -> Link[APMU] -> GSI 20 (level, low) -> IRQ 20 [ 80.800974] nvidia 0000:02:00.0: power state changed by ACPI to D0 [ 80.800986] nvidia 0000:02:00.0: power state changed by ACPI to D0 [ 80.801410] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23 [ 80.801421] nvidia 0000:02:00.0: PCI INT A -> Link[AIGP] -> GSI 23 (level, low) -> IRQ 23 [ 80.801437] nvidia 0000:02:00.0: setting latency timer to 64 [ 80.801447] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 80.802461] NVRM: loading NVIDIA UNIX x86 Kernel Module 270.18 Tue Jan 18 21:44:45 PST 2011 [ 83.546952] coretemp coretemp.0: Unable to read TjMax from CPU. [ 83.802829] lib80211: common routines for IEEE802.11 drivers [ 83.802838] lib80211_crypt: registered algorithm 'NULL' [ 83.807470] lib80211_crypt: registered algorithm 'TKIP' [ 83.881277] lib80211_crypt: registered algorithm 'CCMP' [ 84.005067] lib80211_crypt: registered algorithm 'WEP' [ 85.534775] runscript.sh used greatest stack depth: 5796 bytes left [ 88.753684] Bluetooth: L2CAP ver 2.15 [ 88.753693] Bluetooth: L2CAP socket layer initialized [ 88.787904] Bluetooth: RFCOMM TTY layer initialized [ 88.787921] Bluetooth: RFCOMM socket layer initialized [ 88.787928] Bluetooth: RFCOMM ver 1.11 [ 88.964289] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 88.964298] Bluetooth: BNEP filters: protocol multicast [ 89.007896] Bluetooth: SCO (Voice Link) ver 0.6 [ 89.007903] Bluetooth: SCO socket layer initialized [ 90.718360] ip used greatest stack depth: 5548 bytes left [ 91.654178] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) [ 91.657077] b43-phy0 debug: b2062: Using crystal tab entry 19200 kHz. [ 93.038210] b43-phy0 debug: Chip initialized [ 93.038632] b43-phy0 debug: 64-bit DMA initialized [ 93.038763] b43-phy0 debug: QoS enabled [ 93.047626] b43-phy0 debug: Wireless interface started [ 93.053325] b43-phy0 debug: Adding Interface type 2 [ 93.053545] ieee80211 phy0: device now idle [ 94.503922] ieee80211 phy0: device no longer idle - scanning [ 94.935052] Adding 6297476k swap on /dev/sda2. Priority:-1 extents:1 across:6297476k [ 95.807245] ieee80211 phy0: device now idle [ 95.807613] ieee80211 phy0: device no longer idle - working [ 95.807727] wlan0: direct probe to 00:18:e7:f1:5b:cc (try 1/3) [ 95.812474] wlan0: direct probe responded [ 95.816056] wlan0: authenticate with 00:18:e7:f1:5b:cc (try 1) [ 95.817603] wlan0: authenticated [ 95.817669] wlan0: associate with 00:18:e7:f1:5b:cc (try 1) [ 95.820429] wlan0: RX AssocResp from 00:18:e7:f1:5b:cc (capab=0x431 status=0 aid=2) [ 95.820439] wlan0: associated [ 95.820472] ieee80211 phy0: Allocated STA 00:18:e7:f1:5b:cc [ 95.821711] ieee80211 phy0: Inserted STA 00:18:e7:f1:5b:cc [ 95.821724] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0 [ 95.821845] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0 [ 95.821929] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0 [ 95.822038] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0 [ 96.983108] b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac: 00:18:e7:f1:5b:cc [ 97.000077] wlan0: detected beacon loss from AP - sending probe request [ 98.002060] wlan0: detected beacon loss from AP - sending probe request [ 99.002098] wlan0: detected beacon loss from AP - sending probe request [ 100.000206] wlan0: detected beacon loss from AP - sending probe request [ 100.801646] fuse init (API version 7.16) [ 101.002055] wlan0: detected beacon loss from AP - sending probe request [ 102.002103] wlan0: detected beacon loss from AP - sending probe request [ 102.404008] microcode: CPU0 updated to revision 0x218, date = 2009-04-10 [ 102.410655] microcode: CPU1 updated to revision 0x218, date = 2009-04-10 [ 103.002041] wlan0: detected beacon loss from AP - sending probe request [ 103.502049] ieee80211 phy0: wlan0: No probe response from AP 00:18:e7:f1:5b:cc after 500ms, try 1 [ 105.004057] wlan0: detected beacon loss from AP - sending probe request [ 106.002058] wlan0: detected beacon loss from AP - sending probe request [ 107.002104] wlan0: detected beacon loss from AP - sending probe request [ 108.000034] wlan0: detected beacon loss from AP - sending probe request [ 109.000066] wlan0: detected beacon loss from AP - sending probe request [ 110.000126] wlan0: detected beacon loss from AP - sending probe request [ 111.000091] wlan0: detected beacon loss from AP - sending probe request [ 112.000055] wlan0: detected beacon loss from AP - sending probe request [ 113.000082] wlan0: detected beacon loss from AP - sending probe request [ 114.000083] wlan0: detected beacon loss from AP - sending probe request [ 115.002079] wlan0: detected beacon loss from AP - sending probe request [ 116.000128] wlan0: detected beacon loss from AP - sending probe request [ 117.000124] wlan0: detected beacon loss from AP - sending probe request [ 118.000122] wlan0: detected beacon loss from AP - sending probe request [ 119.000099] wlan0: detected beacon loss from AP - sending probe request [ 120.002134] wlan0: detected beacon loss from AP - sending probe request [ 121.002132] wlan0: detected beacon loss from AP - sending probe request [ 122.002132] wlan0: detected beacon loss from AP - sending probe request [ 123.002130] wlan0: detected beacon loss from AP - sending probe request [ 124.002099] wlan0: detected beacon loss from AP - sending probe request [ 125.002100] wlan0: detected beacon loss from AP - sending probe request [ 126.002107] wlan0: detected beacon loss from AP - sending probe request [ 127.002094] wlan0: detected beacon loss from AP - sending probe request [ 128.002130] wlan0: detected beacon loss from AP - sending probe request [ 129.002090] wlan0: detected beacon loss from AP - sending probe request [ 130.000198] wlan0: detected beacon loss from AP - sending probe request [ 131.002123] wlan0: detected beacon loss from AP - sending probe request [ 132.002109] wlan0: detected beacon loss from AP - sending probe request [ 133.002099] wlan0: detected beacon loss from AP - sending probe request [ 134.002099] wlan0: detected beacon loss from AP - sending probe request [ 135.002086] wlan0: detected beacon loss from AP - sending probe request [ 136.000132] wlan0: detected beacon loss from AP - sending probe request [ 137.002100] wlan0: detected beacon loss from AP - sending probe request [ 138.002101] wlan0: detected beacon loss from AP - sending probe request [ 139.002082] wlan0: detected beacon loss from AP - sending probe request [ 140.002091] wlan0: detected beacon loss from AP - sending probe request [ 141.002089] wlan0: detected beacon loss from AP - sending probe request [ 142.000102] wlan0: detected beacon loss from AP - sending probe request [ 143.000102] wlan0: detected beacon loss from AP - sending probe request [ 144.002087] wlan0: detected beacon loss from AP - sending probe request [ 145.002096] wlan0: detected beacon loss from AP - sending probe request [ 146.000120] wlan0: detected beacon loss from AP - sending probe request [ 147.000120] wlan0: detected beacon loss from AP - sending probe request [ 148.000121] wlan0: detected beacon loss from AP - sending probe request [ 149.000107] wlan0: detected beacon loss from AP - sending probe request [ 150.002089] wlan0: detected beacon loss from AP - sending probe request [ 151.000135] wlan0: detected beacon loss from AP - sending probe request [ 152.000129] wlan0: detected beacon loss from AP - sending probe request [ 153.000127] wlan0: detected beacon loss from AP - sending probe request [ 154.000089] wlan0: detected beacon loss from AP - sending probe request [ 155.000147] wlan0: detected beacon loss from AP - sending probe request [ 156.000098] wlan0: detected beacon loss from AP - sending probe request [ 157.002085] wlan0: detected beacon loss from AP - sending probe request [ 158.002086] wlan0: detected beacon loss from AP - sending probe request [ 159.002086] wlan0: detected beacon loss from AP - sending probe request [ 160.000112] wlan0: detected beacon loss from AP - sending probe request [ 161.002114] wlan0: detected beacon loss from AP - sending probe request [ 162.000095] wlan0: detected beacon loss from AP - sending probe request [ 163.002118] wlan0: detected beacon loss from AP - sending probe request [ 164.000112] wlan0: detected beacon loss from AP - sending probe request [ 165.002100] wlan0: detected beacon loss from AP - sending probe request [ 166.002096] wlan0: detected beacon loss from AP - sending probe request [ 167.000159] wlan0: detected beacon loss from AP - sending probe request [ 168.000105] wlan0: detected beacon loss from AP - sending probe request [ 169.002087] wlan0: detected beacon loss from AP - sending probe request [ 170.002086] wlan0: detected beacon loss from AP - sending probe request [ 171.002108] wlan0: detected beacon loss from AP - sending probe request [ 172.000120] wlan0: detected beacon loss from AP - sending probe request [ 173.000106] wlan0: detected beacon loss from AP - sending probe request [ 174.002109] wlan0: detected beacon loss from AP - sending probe request [ 175.000153] wlan0: detected beacon loss from AP - sending probe request [ 176.000121] wlan0: detected beacon loss from AP - sending probe request [ 177.000125] wlan0: detected beacon loss from AP - sending probe request [ 178.000119] wlan0: detected beacon loss from AP - sending probe request [ 179.000104] wlan0: detected beacon loss from AP - sending probe request [ 180.000112] wlan0: detected beacon loss from AP - sending probe request [ 181.002087] wlan0: detected beacon loss from AP - sending probe request [ 182.002097] wlan0: detected beacon loss from AP - sending probe request [ 183.002111] wlan0: detected beacon loss from AP - sending probe request [ 184.002105] wlan0: detected beacon loss from AP - sending probe request [ 185.000116] wlan0: detected beacon loss from AP - sending probe request [ 186.002105] wlan0: detected beacon loss from AP - sending probe request [ 187.000098] wlan0: detected beacon loss from AP - sending probe request [ 188.000124] wlan0: detected beacon loss from AP - sending probe request [ 189.000114] wlan0: detected beacon loss from AP - sending probe request [ 190.000129] wlan0: detected beacon loss from AP - sending probe request [ 191.000116] wlan0: detected beacon loss from AP - sending probe request [ 192.000122] wlan0: detected beacon loss from AP - sending probe request [ 193.000110] wlan0: detected beacon loss from AP - sending probe request [ 194.000123] wlan0: detected beacon loss from AP - sending probe request [ 195.000105] wlan0: detected beacon loss from AP - sending probe request [ 196.002104] wlan0: detected beacon loss from AP - sending probe request [ 197.002100] wlan0: detected beacon loss from AP - sending probe request [ 198.000121] wlan0: detected beacon loss from AP - sending probe request [ 199.002106] wlan0: detected beacon loss from AP - sending probe request [ 200.000151] wlan0: detected beacon loss from AP - sending probe request [ 201.000119] wlan0: detected beacon loss from AP - sending probe request [ 202.000121] wlan0: detected beacon loss from AP - sending probe request [ 203.000122] wlan0: detected beacon loss from AP - sending probe request [ 204.000136] wlan0: detected beacon loss from AP - sending probe request [ 205.000118] wlan0: detected beacon loss from AP - sending probe request [ 206.000105] wlan0: detected beacon loss from AP - sending probe request [ 207.000119] wlan0: detected beacon loss from AP - sending probe request [ 208.000102] wlan0: detected beacon loss from AP - sending probe request [ 209.002089] wlan0: detected beacon loss from AP - sending probe request [ 210.002089] wlan0: detected beacon loss from AP - sending probe request [ 211.000124] wlan0: detected beacon loss from AP - sending probe request [ 212.000122] wlan0: detected beacon loss from AP - sending probe request [ 213.000125] wlan0: detected beacon loss from AP - sending probe request [ 214.000126] wlan0: detected beacon loss from AP - sending probe request [ 215.002120] wlan0: detected beacon loss from AP - sending probe request [ 216.002109] wlan0: detected beacon loss from AP - sending probe request [ 217.000164] wlan0: detected beacon loss from AP - sending probe request [ 218.000125] wlan0: detected beacon loss from AP - sending probe request [ 219.000122] wlan0: detected beacon loss from AP - sending probe request [ 220.000109] wlan0: detected beacon loss from AP - sending probe request [ 221.002101] wlan0: detected beacon loss from AP - sending probe request [ 222.002102] wlan0: detected beacon loss from AP - sending probe request [ 223.000133] wlan0: detected beacon loss from AP - sending probe request [ 224.000122] wlan0: detected beacon loss from AP - sending probe request [ 225.000088] wlan0: detected beacon loss from AP - sending probe request [ 226.002100] wlan0: detected beacon loss from AP - sending probe request [ 227.002111] wlan0: detected beacon loss from AP - sending probe request [ 228.002111] wlan0: detected beacon loss from AP - sending probe request [ 229.000134] wlan0: detected beacon loss from AP - sending probe request [ 230.000134] wlan0: detected beacon loss from AP - sending probe request [ 231.000144] wlan0: detected beacon loss from AP - sending probe request [ 232.000122] wlan0: detected beacon loss from AP - sending probe request [ 233.000091] wlan0: detected beacon loss from AP - sending probe request [ 234.002092] wlan0: detected beacon loss from AP - sending probe request [ 235.000107] wlan0: detected beacon loss from AP - sending probe request [ 236.000143] wlan0: detected beacon loss from AP - sending probe request [ 237.000120] wlan0: detected beacon loss from AP - sending probe request [ 238.000106] wlan0: detected beacon loss from AP - sending probe request [ 239.000086] wlan0: detected beacon loss from AP - sending probe request [ 240.000138] wlan0: detected beacon loss from AP - sending probe request [ 241.000104] wlan0: detected beacon loss from AP - sending probe request [ 242.000150] wlan0: detected beacon loss from AP - sending probe request [ 243.000110] wlan0: detected beacon loss from AP - sending probe request [ 244.000113] wlan0: detected beacon loss from AP - sending probe request [ 245.002113] wlan0: detected beacon loss from AP - sending probe request [ 246.000154] wlan0: detected beacon loss from AP - sending probe request [ 247.000094] wlan0: detected beacon loss from AP - sending probe request [ 248.002101] wlan0: detected beacon loss from AP - sending probe request [ 249.002081] wlan0: detected beacon loss from AP - sending probe request [ 250.002094] wlan0: detected beacon loss from AP - sending probe request [ 251.000139] wlan0: detected beacon loss from AP - sending probe request [ 252.000121] wlan0: detected beacon loss from AP - sending probe request [ 253.000112] wlan0: detected beacon loss from AP - sending probe request [ 254.002098] wlan0: detected beacon loss from AP - sending probe request [ 255.002083] wlan0: detected beacon loss from AP - sending probe request [ 256.002103] wlan0: detected beacon loss from AP - sending probe request [ 257.000115] wlan0: detected beacon loss from AP - sending probe request [ 258.000130] wlan0: detected beacon loss from AP - sending probe request [ 259.000117] wlan0: detected beacon loss from AP - sending probe request [ 260.000101] wlan0: detected beacon loss from AP - sending probe request [ 261.000121] wlan0: detected beacon loss from AP - sending probe request [ 262.000122] wlan0: detected beacon loss from AP - sending probe request [ 263.000122] wlan0: detected beacon loss from AP - sending probe request [ 264.000120] wlan0: detected beacon loss from AP - sending probe request [ 265.002093] wlan0: detected beacon loss from AP - sending probe request [ 266.000088] wlan0: detected beacon loss from AP - sending probe request [ 267.000103] wlan0: detected beacon loss from AP - sending probe request [ 268.002097] wlan0: detected beacon loss from AP - sending probe request [ 269.002084] wlan0: detected beacon loss from AP - sending probe request [ 270.000105] wlan0: detected beacon loss from AP - sending probe request [ 271.002094] wlan0: detected beacon loss from AP - sending probe request [ 272.002078] wlan0: detected beacon loss from AP - sending probe request [ 273.002072] wlan0: detected beacon loss from AP - sending probe request [ 274.002205] wlan0: detected beacon loss from AP - sending probe request [ 275.002107] wlan0: detected beacon loss from AP - sending probe request [ 276.000119] wlan0: detected beacon loss from AP - sending probe request [ 277.002121] wlan0: detected beacon loss from AP - sending probe request [ 278.002097] wlan0: detected beacon loss from AP - sending probe request [ 279.000146] wlan0: detected beacon loss from AP - sending probe request [ 280.000119] wlan0: detected beacon loss from AP - sending probe request [ 281.000125] wlan0: detected beacon loss from AP - sending probe request [ 282.000127] wlan0: detected beacon loss from AP - sending probe request [ 283.000116] wlan0: detected beacon loss from AP - sending probe request [ 284.000118] wlan0: detected beacon loss from AP - sending probe request [ 285.002107] wlan0: detected beacon loss from AP - sending probe request [ 286.000115] wlan0: detected beacon loss from AP - sending probe request [ 287.000104] wlan0: detected beacon loss from AP - sending probe request [ 288.000133] wlan0: detected beacon loss from AP - sending probe request [ 289.000108] wlan0: detected beacon loss from AP - sending probe request [ 290.000119] wlan0: detected beacon loss from AP - sending probe request [ 291.002133] wlan0: detected beacon loss from AP - sending probe request [ 292.002110] wlan0: detected beacon loss from AP - sending probe request [ 293.002083] wlan0: detected beacon loss from AP - sending probe request [ 294.000116] wlan0: detected beacon loss from AP - sending probe request [ 295.000126] wlan0: detected beacon loss from AP - sending probe request [ 296.000127] wlan0: detected beacon loss from AP - sending probe request [ 297.000116] wlan0: detected beacon loss from AP - sending probe request [ 298.002135] wlan0: detected beacon loss from AP - sending probe request [ 299.002122] wlan0: detected beacon loss from AP - sending probe request [ 300.000115] wlan0: detected beacon loss from AP - sending probe request [ 301.000126] wlan0: detected beacon loss from AP - sending probe request [ 302.000107] wlan0: detected beacon loss from AP - sending probe request [ 303.000135] wlan0: detected beacon loss from AP - sending probe request [ 304.000109] wlan0: detected beacon loss from AP - sending probe request [ 305.000093] wlan0: detected beacon loss from AP - sending probe request [ 306.000141] wlan0: detected beacon loss from AP - sending probe request [ 307.000117] wlan0: detected beacon loss from AP - sending probe request [ 308.000125] wlan0: detected beacon loss from AP - sending probe request [ 309.000125] wlan0: detected beacon loss from AP - sending probe request [ 310.000143] wlan0: detected beacon loss from AP - sending probe request [ 311.000138] wlan0: detected beacon loss from AP - sending probe request [ 312.000120] wlan0: detected beacon loss from AP - sending probe request [ 313.000122] wlan0: detected beacon loss from AP - sending probe request [ 314.000118] wlan0: detected beacon loss from AP - sending probe request [ 315.000120] wlan0: detected beacon loss from AP - sending probe request [ 316.000125] wlan0: detected beacon loss from AP - sending probe request [ 317.000117] wlan0: detected beacon loss from AP - sending probe request [ 318.002137] wlan0: detected beacon loss from AP - sending probe request [ 319.002119] wlan0: detected beacon loss from AP - sending probe request [ 320.002107] wlan0: detected beacon loss from AP - sending probe request [ 321.002114] wlan0: detected beacon loss from AP - sending probe request [ 322.002102] wlan0: detected beacon loss from AP - sending probe request [ 323.000120] wlan0: detected beacon loss from AP - sending probe request [ 324.000137] wlan0: detected beacon loss from AP - sending probe request [ 325.000130] wlan0: detected beacon loss from AP - sending probe request [ 326.000109] wlan0: detected beacon loss from AP - sending probe request [ 327.000115] wlan0: detected beacon loss from AP - sending probe request [ 328.000119] wlan0: detected beacon loss from AP - sending probe request [ 329.000120] wlan0: detected beacon loss from AP - sending probe request [ 330.000122] wlan0: detected beacon loss from AP - sending probe request [ 331.000124] wlan0: detected beacon loss from AP - sending probe request [ 332.000111] wlan0: detected beacon loss from AP - sending probe request [ 333.002118] wlan0: detected beacon loss from AP - sending probe request [ 334.000116] wlan0: detected beacon loss from AP - sending probe request [ 335.000113] wlan0: detected beacon loss from AP - sending probe request [ 336.000125] wlan0: detected beacon loss from AP - sending probe request [ 337.000118] wlan0: detected beacon loss from AP - sending probe request [ 338.000114] wlan0: detected beacon loss from AP - sending probe request [ 339.000117] wlan0: detected beacon loss from AP - sending probe request [ 340.002089] wlan0: detected beacon loss from AP - sending probe request [ 341.000113] wlan0: detected beacon loss from AP - sending probe request [ 342.000110] wlan0: detected beacon loss from AP - sending probe request [ 343.000129] wlan0: detected beacon loss from AP - sending probe request [ 344.000123] wlan0: detected beacon loss from AP - sending probe request [ 345.000142] wlan0: detected beacon loss from AP - sending probe request [ 346.000120] wlan0: detected beacon loss from AP - sending probe request [ 347.000118] wlan0: detected beacon loss from AP - sending probe request [ 348.002148] wlan0: detected beacon loss from AP - sending probe request [ 349.002116] wlan0: detected beacon loss from AP - sending probe request [ 350.002117] wlan0: detected beacon loss from AP - sending probe request [ 351.002133] wlan0: detected beacon loss from AP - sending probe request [ 352.002101] wlan0: detected beacon loss from AP - sending probe request [ 353.002100] wlan0: detected beacon loss from AP - sending probe request [ 354.000115] wlan0: detected beacon loss from AP - sending probe request [ 355.000122] wlan0: detected beacon loss from AP - sending probe request [ 356.000130] wlan0: detected beacon loss from AP - sending probe request [ 357.000107] wlan0: detected beacon loss from AP - sending probe request [ 358.000142] wlan0: detected beacon loss from AP - sending probe request [ 359.000089] wlan0: detected beacon loss from AP - sending probe request [ 360.002092] wlan0: detected beacon loss from AP - sending probe request [ 361.000128] wlan0: detected beacon loss from AP - sending probe request [ 362.000134] wlan0: detected beacon loss from AP - sending probe request [ 363.000149] wlan0: detected beacon loss from AP - sending probe request [ 364.000119] wlan0: detected beacon loss from AP - sending probe request [ 365.000113] wlan0: detected beacon loss from AP - sending probe request [ 366.002116] wlan0: detected beacon loss from AP - sending probe request [ 367.000164] wlan0: detected beacon loss from AP - sending probe request [ 368.000127] wlan0: detected beacon loss from AP - sending probe request [ 369.000120] wlan0: detected beacon loss from AP - sending probe request [ 370.000107] wlan0: detected beacon loss from AP - sending probe request [ 371.000145] wlan0: detected beacon loss from AP - sending probe request [ 372.000125] wlan0: detected beacon loss from AP - sending probe request [ 373.000128] wlan0: detected beacon loss from AP - sending probe request [ 374.002132] wlan0: detected beacon loss from AP - sending probe request [ 375.002107] wlan0: detected beacon loss from AP - sending probe request [ 376.000164] wlan0: detected beacon loss from AP - sending probe request [ 377.000116] wlan0: detected beacon loss from AP - sending probe request [ 378.000114] wlan0: detected beacon loss from AP - sending probe request [ 379.000117] wlan0: detected beacon loss from AP - sending probe request [ 380.000130] wlan0: detected beacon loss from AP - sending probe request [ 381.000109] wlan0: detected beacon loss from AP - sending probe request [ 382.000116] wlan0: detected beacon loss from AP - sending probe request [ 383.000123] wlan0: detected beacon loss from AP - sending probe request [ 384.000118] wlan0: detected beacon loss from AP - sending probe request [ 385.002127] wlan0: detected beacon loss from AP - sending probe request [ 386.002114] wlan0: detected beacon loss from AP - sending probe request [ 387.002130] wlan0: detected beacon loss from AP - sending probe request [ 388.002137] wlan0: detected beacon loss from AP - sending probe request [ 389.002124] wlan0: detected beacon loss from AP - sending probe request [ 390.002137] wlan0: detected beacon loss from AP - sending probe request [ 390.032631] wlan0: deauthenticated from 00:18:e7:f1:5b:cc (Reason: 2) [ 390.041131] b43-phy0 debug: Disabling hardware based encryption for keyidx: 0, mac: 00:18:e7:f1:5b:cc [ 390.049092] ieee80211 phy0: Removed STA 00:18:e7:f1:5b:cc [ 390.049310] ieee80211 phy0: Destroyed STA 00:18:e7:f1:5b:cc [ 390.049422] ieee80211 phy0: device now idle [ 390.061394] cfg80211: All devices are disconnected, going to restore regulatory settings [ 390.061417] cfg80211: Restoring regulatory settings [ 390.061447] cfg80211: Calling CRDA to update world regulatory domain [ 390.157659] ieee80211 phy0: device no longer idle - scanning [ 391.325308] ieee80211 phy0: device now idle [ 391.331082] b43-phy0 debug: Removing Interface type 2 [ 391.331375] b43-phy0 debug: Wireless interface stopped [ 391.331676] b43-phy0 debug: DMA-64 rx_ring: Used slots 1/64, Failed frames 0/0 = 0.0%, Average tries 0.00 [ 391.331946] b43-phy0 debug: DMA-64 tx_ring_AC_BK: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00 [ 391.334131] b43-phy0 debug: DMA-64 tx_ring_AC_BE: Used slots 2/256, Failed frames 0/3 = 0.0%, Average tries 1.00 [ 391.336104] b43-phy0 debug: DMA-64 tx_ring_AC_VI: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00 [ 391.338098] b43-phy0 debug: DMA-64 tx_ring_AC_VO: Used slots 2/256, Failed frames 2/320 = 0.6%, Average tries 1.03 [ 391.340164] b43-phy0 debug: DMA-64 tx_ring_mcast: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00 [ 4003.407934] ata1.00: configured for UDMA/100 [ 4003.407948] ata1: EH complete [ 4010.171889] NET: Registered protocol family 10 [ 4010.310471] Bridge firewalling registered [ 4012.753216] EXT4-fs (dm-1): re-mounted. Opts: commit=0 [ 4021.002059] pan1: no IPv6 routers present