[PATCH wireless-next v3 00/10] bcma-ac-rev1: support 4352/4360 rev3 chips

[Alessio Ferri]

Preparatory work in the bring up of AC family rev1 chips, in particular,
the bcm4352 rev3 and bcm4360 rev3. When public sources were found, the 
same gates applied for operations were ported in this code.

Initialize the PMU, the PCIe2 core and chipcommon of the BCM4352/BCM4360
family on chip based on the open source version of broadcom driver, parse 
SPROM revision 11, read the NVRAM variables set on top of the SPROM, and 
bind bcma-pci-bridge to the BCM4352.

Signed-off-by: Alessio Ferri <alessio.ferri at mythread.it>
---
Changes in v3:
- regated most of the checks on the proper version/flag present
  instead of forcing everything to be rev3 only, as Vitaly suggested
- Added nvram parsing for all params found in a real northstar router
- Removed AvVmid parsing from nvram, as it doesn't seems to be useful
- Added missing pci ids for 4352/4360 variants
- Link to v2: https://patch.msgid.link/20261027-bcma-ac-rev1-v2-0-b69b61c31920@mythread.it

Changes in v2:
- gated chipcommon behaviour on its own revision instead of chip rev as
  pointed out by Vitaly
- Link to v1: https://patch.msgid.link/20261014-bcma-ac-rev1-v1-0-b608e99d3f56@mythread.it

To: Rafał Miłecki <zajec5 at gmail.com>
To: Michael Buesch <m at bues.ch>
To: vit9696 <vit9696 at protonmail.com>
Cc: linux-wireless at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-mips at vger.kernel.org
Cc: b43-dev at lists.infradead.org

---
Alessio Ferri (10):
      bcma: core: clear only FORCEHT for BCMA_CLKMODE_DYNAMIC
      bcma: pmu: init PLL and resources on BCM4352/BCM4360
      bcma: pcie2: request HT on BCM4352/BCM4360
      bcma: chipcommon: enable asynchronous GPIO interrupts
      bcma: extract SPROM revision 11
      firmware: bcm47xx_sprom: read the SPROM revision 11 fields from NVRAM
      firmware: bcm47xx_sprom: read ledbh4..ledbh15 from NVRAM
      firmware: bcm47xx_sprom: read boardflags3 from NVRAM over the SPROM
      bcma: add the single-band BCM4352/BCM4360 PCI IDs
      wifi: b43: add the 2.4 GHz BCM4352/BCM4360 to the supported bands

 drivers/bcma/core.c                         |   2 +-
 drivers/bcma/driver_chipcommon.c            |   3 +
 drivers/bcma/driver_chipcommon_pmu.c        |  81 +++++++++
 drivers/bcma/driver_pcie2.c                 |   3 +
 drivers/bcma/host_pci.c                     |   8 +-
 drivers/bcma/sprom.c                        | 200 +++++++++++++++++++++-
 drivers/firmware/broadcom/bcm47xx_sprom.c   | 253 +++++++++++++++++++++++++---
 drivers/net/wireless/broadcom/b43/main.c    |   6 +
 include/linux/bcm47xx_sprom.h               |  15 ++
 include/linux/bcma/bcma_driver_chipcommon.h |  15 ++
 include/linux/ssb/ssb.h                     |  70 ++++++++
 include/linux/ssb/ssb_regs.h                |  94 +++++++++++
 12 files changed, 722 insertions(+), 28 deletions(-)
---
base-commit: 0fcb05b72344f40806cbe810de8872f1698bf053
change-id: 20261014-bcma-ac-rev1-da894142790f

Best regards,
--  
Alessio Ferri <alessio.ferri at mythread.it>