AW: b43: ac rev1 captured packets with ampdu

[andreas.wendleder]

Hi Alessio,

Thanks for the captures. I’ll look at them when I get to 5 GHz, where my RX is still broken.

Your driver no longer hangs my machine. The hang was my own logging, a 30 ms delay on each of about 80000 table calls. Without it, your head (ce2127a) runs the whole init in about 5 s. The radio doesn’t come up on my chip, though: after the first channel I get radio 2069: power-on timeout (0x040b=0x0001), so the RCAL done bit never sets.

Your blocks (mode_init, set_reg_on_reset, coeff_bank_init, init_regs) let me replace my 290-write PHY replay with a 72-write init. 2.4 GHz now runs at about 20 Mbit/s up and 17 down. Do you know where PHY words 0x1739, 0x016b, 0x0175, 0x03c4 and 0x0197/0x0198 come from? I couldn’t find them in your code.

Thanks, Andreas