[PATCH] wifi: b43: use register definitions in nphy_op_software_rfkill

[Joshua Peisach]

Replaces uses of hardcoded register addresses with proper definitions,
for readability.

Signed-off-by: Joshua Peisach <jpeisach at ubuntu.com>
---
 drivers/net/wireless/broadcom/b43/phy_n.c | 26 +++++++++++------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/broadcom/b43/phy_n.c b/drivers/net/wireless/broadcom/b43/phy_n.c
index bbc30cbad..22359bd9d 100644
--- a/drivers/net/wireless/broadcom/b43/phy_n.c
+++ b/drivers/net/wireless/broadcom/b43/phy_n.c
@@ -6566,19 +6566,19 @@ static void b43_nphy_op_software_rfkill(struct b43_wldev *dev,
 
 			b43_radio_mask(dev, 0x09, ~0x2);
 
-			b43_radio_write(dev, 0x204D, 0);
-			b43_radio_write(dev, 0x2053, 0);
-			b43_radio_write(dev, 0x2058, 0);
-			b43_radio_write(dev, 0x205E, 0);
-			b43_radio_mask(dev, 0x2062, ~0xF0);
-			b43_radio_write(dev, 0x2064, 0);
-
-			b43_radio_write(dev, 0x304D, 0);
-			b43_radio_write(dev, 0x3053, 0);
-			b43_radio_write(dev, 0x3058, 0);
-			b43_radio_write(dev, 0x305E, 0);
-			b43_radio_mask(dev, 0x3062, ~0xF0);
-			b43_radio_write(dev, 0x3064, 0);
+			b43_radio_write(dev, B2056_TX0 | B2056_TX_PADA_BOOST_TUNE, 0);
+			b43_radio_write(dev, B2056_TX0 | B2056_TX_PADG_BOOST_TUNE, 0);
+			b43_radio_write(dev, B2056_TX0 | B2056_TX_PGAA_BOOST_TUNE, 0);
+			b43_radio_write(dev, B2056_TX0 | B2056_TX_PGAG_BOOST_TUNE, 0);
+			b43_radio_mask(dev, B2056_TX0 | B2056_TX_MIXA_BOOST_TUNE, ~0xF0);
+			b43_radio_write(dev, B2056_TX0 | B2056_TX_MIXG_BOOST_TUNE, 0);
+
+			b43_radio_write(dev, B2056_TX1 | B2056_TX_PADA_BOOST_TUNE, 0);
+			b43_radio_write(dev, B2056_TX1 | B2056_TX_PADG_BOOST_TUNE, 0);
+			b43_radio_write(dev, B2056_TX1 | B2056_TX_PGAA_BOOST_TUNE, 0);
+			b43_radio_write(dev, B2056_TX1 | B2056_TX_PGAG_BOOST_TUNE, 0);
+			b43_radio_mask(dev, B2056_TX1 | B2056_TX_MIXA_BOOST_TUNE, ~0xF0);
+			b43_radio_write(dev, B2056_TX1 | B2056_TX_MIXG_BOOST_TUNE, 0);
 		}
 	} else {
 		if (phy->rev >= 19) {
-- 
2.51.0