[PATCH 1/2] b43: N-PHY: fixes for radio 0x2057
Rafał Miłecki
zajec5 at gmail.com
Tue Jul 1 07:19:07 PDT 2014
Enable initialization and update calibration code to fix:
b43-phy0 ERROR: Radio 0x2057 rcal timeout
b43-phy0 debug: Radio 0x2057 rccal timeout
b43-phy0 debug: Radio 0x2057 rccal timeout
b43-phy0 ERROR: Radio 0x2057 rcal timeout
Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
---
drivers/net/wireless/b43/phy_n.c | 63 +++++++++++++++++++++++++++++------
drivers/net/wireless/b43/radio_2057.c | 20 +++++------
2 files changed, 61 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 0fb5e14..8369a08 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -590,7 +590,9 @@ static void b43_nphy_set_rf_sequence(struct b43_wldev *dev, u8 cmd,
* Radio 0x2057
**************************************************/
-/* http://bcm-v4.sipsolutions.net/PHY/radio2057_rcal */
+/* Calibrate resistors in LPF of PLL?
+ * http://bcm-v4.sipsolutions.net/PHY/radio205x_rcal
+ */
static u8 b43_radio_2057_rcal(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
@@ -603,15 +605,25 @@ static u8 b43_radio_2057_rcal(struct b43_wldev *dev)
b43_radio_maskset(dev, 0x1ca, ~0x2, 0x1);
}
+ /* Enable */
b43_radio_set(dev, R2057_RCAL_CONFIG, 0x1);
udelay(10);
- b43_radio_set(dev, R2057_RCAL_CONFIG, 0x3);
- if (!b43_radio_wait_value(dev, R2057_RCCAL_N1_1, 1, 1, 100, 1000000)) {
+
+ /* Start */
+ b43_radio_set(dev, R2057_RCAL_CONFIG, 0x2);
+ usleep_range(100, 200);
+
+ /* Stop */
+ b43_radio_mask(dev, R2057_RCAL_CONFIG, ~0x2);
+
+ /* Wait and check for result */
+ if (!b43_radio_wait_value(dev, R2057_RCAL_STATUS, 1, 1, 100, 1000000)) {
b43err(dev->wl, "Radio 0x2057 rcal timeout\n");
return 0;
}
- b43_radio_mask(dev, R2057_RCAL_CONFIG, ~0x2);
tmp = b43_radio_read(dev, R2057_RCAL_STATUS) & 0x3E;
+
+ /* Disable */
b43_radio_mask(dev, R2057_RCAL_CONFIG, ~0x1);
if (phy->radio_rev == 5) {
@@ -627,7 +639,9 @@ static u8 b43_radio_2057_rcal(struct b43_wldev *dev)
return tmp & 0x3e;
}
-/* http://bcm-v4.sipsolutions.net/PHY/radio2057_rccal */
+/* Calibrate the internal RC oscillator?
+ * http://bcm-v4.sipsolutions.net/PHY/radio2057_rccal
+ */
static u16 b43_radio_2057_rccal(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
@@ -635,49 +649,76 @@ static u16 b43_radio_2057_rccal(struct b43_wldev *dev)
phy->radio_rev == 6);
u16 tmp;
+ /* Setup cal */
if (special) {
b43_radio_write(dev, R2057_RCCAL_MASTER, 0x61);
b43_radio_write(dev, R2057_RCCAL_TRC0, 0xC0);
} else {
- b43_radio_write(dev, 0x1AE, 0x61);
+ b43_radio_write(dev, R2057v7_RCCAL_MASTER, 0x61);
b43_radio_write(dev, R2057_RCCAL_TRC0, 0xE1);
}
b43_radio_write(dev, R2057_RCCAL_X1, 0x6E);
+
+ /* Start, wait, stop */
b43_radio_write(dev, R2057_RCCAL_START_R1_Q1_P1, 0x55);
- if (!b43_radio_wait_value(dev, R2057_RCCAL_DONE_OSCCAP, 1, 1, 500,
+ if (!b43_radio_wait_value(dev, R2057_RCCAL_DONE_OSCCAP, 2, 2, 500,
5000000))
b43dbg(dev->wl, "Radio 0x2057 rccal timeout\n");
+ usleep_range(35, 70);
b43_radio_write(dev, R2057_RCCAL_START_R1_Q1_P1, 0x15);
+ usleep_range(70, 140);
+
+ /* Setup cal */
if (special) {
b43_radio_write(dev, R2057_RCCAL_MASTER, 0x69);
b43_radio_write(dev, R2057_RCCAL_TRC0, 0xB0);
} else {
- b43_radio_write(dev, 0x1AE, 0x69);
+ b43_radio_write(dev, R2057v7_RCCAL_MASTER, 0x69);
b43_radio_write(dev, R2057_RCCAL_TRC0, 0xD5);
}
b43_radio_write(dev, R2057_RCCAL_X1, 0x6E);
+
+ /* Start, wait, stop */
+ usleep_range(35, 70);
b43_radio_write(dev, R2057_RCCAL_START_R1_Q1_P1, 0x55);
- if (!b43_radio_wait_value(dev, R2057_RCCAL_DONE_OSCCAP, 1, 1, 500,
+ usleep_range(70, 140);
+ if (!b43_radio_wait_value(dev, R2057_RCCAL_DONE_OSCCAP, 2, 2, 500,
5000000))
b43dbg(dev->wl, "Radio 0x2057 rccal timeout\n");
+ usleep_range(35, 70);
b43_radio_write(dev, R2057_RCCAL_START_R1_Q1_P1, 0x15);
+ usleep_range(70, 140);
+
+ /* Setup cal */
if (special) {
b43_radio_write(dev, R2057_RCCAL_MASTER, 0x73);
b43_radio_write(dev, R2057_RCCAL_X1, 0x28);
b43_radio_write(dev, R2057_RCCAL_TRC0, 0xB0);
} else {
- b43_radio_write(dev, 0x1AE, 0x73);
+ b43_radio_write(dev, R2057v7_RCCAL_MASTER, 0x73);
b43_radio_write(dev, R2057_RCCAL_X1, 0x6E);
b43_radio_write(dev, R2057_RCCAL_TRC0, 0x99);
}
+
+ /* Start, wait, stop */
+ usleep_range(35, 70);
b43_radio_write(dev, R2057_RCCAL_START_R1_Q1_P1, 0x55);
- if (!b43_radio_wait_value(dev, R2057_RCCAL_DONE_OSCCAP, 1, 1, 500,
+ usleep_range(70, 140);
+ if (!b43_radio_wait_value(dev, R2057_RCCAL_DONE_OSCCAP, 2, 2, 500,
5000000)) {
b43err(dev->wl, "Radio 0x2057 rcal timeout\n");
return 0;
}
tmp = b43_radio_read(dev, R2057_RCCAL_DONE_OSCCAP);
+ usleep_range(35, 70);
b43_radio_write(dev, R2057_RCCAL_START_R1_Q1_P1, 0x15);
+ usleep_range(70, 140);
+
+ if (special)
+ b43_radio_mask(dev, R2057_RCCAL_MASTER, ~0x1);
+ else
+ b43_radio_mask(dev, R2057v7_RCCAL_MASTER, ~0x1);
+
return tmp;
}
diff --git a/drivers/net/wireless/b43/radio_2057.c b/drivers/net/wireless/b43/radio_2057.c
index d61d683..5e49440 100644
--- a/drivers/net/wireless/b43/radio_2057.c
+++ b/drivers/net/wireless/b43/radio_2057.c
@@ -26,7 +26,7 @@
#include "radio_2057.h"
#include "phy_common.h"
-static u16 r2057_rev4_init[42][2] = {
+static u16 r2057_rev4_init[][2] = {
{ 0x0E, 0x20 }, { 0x31, 0x00 }, { 0x32, 0x00 }, { 0x33, 0x00 },
{ 0x35, 0x26 }, { 0x3C, 0xff }, { 0x3D, 0xff }, { 0x3E, 0xff },
{ 0x3F, 0xff }, { 0x62, 0x33 }, { 0x8A, 0xf0 }, { 0x8B, 0x10 },
@@ -40,7 +40,7 @@ static u16 r2057_rev4_init[42][2] = {
{ 0x1AB, 0x00 }, { 0x1AC, 0x00 },
};
-static u16 r2057_rev5_init[44][2] = {
+static u16 r2057_rev5_init[][2] = {
{ 0x00, 0x00 }, { 0x01, 0x57 }, { 0x02, 0x20 }, { 0x23, 0x6 },
{ 0x31, 0x00 }, { 0x32, 0x00 }, { 0x33, 0x00 }, { 0x51, 0x70 },
{ 0x59, 0x88 }, { 0x5C, 0x20 }, { 0x62, 0x33 }, { 0x63, 0x0f },
@@ -54,7 +54,7 @@ static u16 r2057_rev5_init[44][2] = {
{ 0x1AC, 0x00 }, { 0x1B7, 0x0c }, { 0x1C1, 0x01 }, { 0x1C2, 0x80 },
};
-static u16 r2057_rev5a_init[45][2] = {
+static u16 r2057_rev5a_init[][2] = {
{ 0x00, 0x15 }, { 0x01, 0x57 }, { 0x02, 0x20 }, { 0x23, 0x6 },
{ 0x31, 0x00 }, { 0x32, 0x00 }, { 0x33, 0x00 }, { 0x51, 0x70 },
{ 0x59, 0x88 }, { 0x5C, 0x20 }, { 0x62, 0x33 }, { 0x63, 0x0f },
@@ -69,7 +69,7 @@ static u16 r2057_rev5a_init[45][2] = {
{ 0x1C2, 0x80 },
};
-static u16 r2057_rev7_init[54][2] = {
+static u16 r2057_rev7_init[][2] = {
{ 0x00, 0x00 }, { 0x01, 0x57 }, { 0x02, 0x20 }, { 0x31, 0x00 },
{ 0x32, 0x00 }, { 0x33, 0x00 }, { 0x51, 0x70 }, { 0x59, 0x88 },
{ 0x5C, 0x20 }, { 0x62, 0x33 }, { 0x63, 0x0f }, { 0x64, 0x13 },
@@ -86,7 +86,7 @@ static u16 r2057_rev7_init[54][2] = {
{ 0x1B7, 0x05 }, { 0x1C2, 0xa0 },
};
-static u16 r2057_rev8_init[54][2] = {
+static u16 r2057_rev8_init[][2] = {
{ 0x00, 0x08 }, { 0x01, 0x57 }, { 0x02, 0x20 }, { 0x31, 0x00 },
{ 0x32, 0x00 }, { 0x33, 0x00 }, { 0x51, 0x70 }, { 0x59, 0x88 },
{ 0x5C, 0x20 }, { 0x62, 0x33 }, { 0x63, 0x0f }, { 0x64, 0x0f },
@@ -130,12 +130,10 @@ void r2057_upload_inittabs(struct b43_wldev *dev)
}
}
+ B43_WARN_ON(!table);
+
if (table) {
- for (i = 0; i < 10; i++) {
- pr_info("radio_write 0x%X ", *table);
- table++;
- pr_info("0x%X\n", *table);
- table++;
- }
+ for (i = 0; i < size; i++, table += 2)
+ b43_radio_write(dev, table[0], table[1]);
}
}
--
1.8.4.5
More information about the b43-dev
mailing list