[PATCH] SSB / B44: fix WOL for BCM4401

Michael Büsch m at bues.ch
Mon Dec 1 13:10:23 PST 2014


On Mon,  1 Dec 2014 23:46:38 +0300
Andrey Skvortsov <andrej.skvortzov at gmail.com> wrote:

> Wake On Lan was not working on laptop DELL Vostro 1500.
> If WOL was turned on, BCM4401 was powered up in suspend mode. LEDs blinked.
> But the laptop could not be woken up with the Magic Packet. The reason for
> that was that PCIE was not enabled as a system wakeup source and
> therefore the host PCI bridge was not powered up in suspend mode.
> PCIE was not enabled in suspend by PM because no child devices were
> registered as wakeup source during suspend process.
> On laptop BCM4401 is connected through the SSB bus, that is connected to the
> PCI-Express bus. SSB and B44 did not use standard PM wakeup functions
> and did not forward wakeup settings to their parents.
> To fix that B44 driver enables PM wakeup and registers new wakeup source
> using device_set_wakeup_enable(). Wakeup is automatically reported to the parent SSB
> bus via power.wakeup_path. SSB bus enables wakeup for the parent PCI bridge, if there is any
> child devices with enabled wakeup functionality. All other steps are
> done by PM core code.

Thanks, this looks good.
I assume you tested this (I currently don't have a device to test this).

Larry, Rafał, any other b43 user:
Can you please test whether this doesn't cause regressions for suspend/resume on b43?
(Patch is attached as reference)


> Signed-off-by: Andrey Skvortsov <Andrej.Skvortzov at gmail.com>
> ---
>  drivers/net/ethernet/broadcom/b44.c |    2 ++
>  drivers/ssb/pcihost_wrapper.c       |   33 ++++++++++++++++++++++-----------
>  2 files changed, 24 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c
> index 416620f..ffeaf47 100644
> --- a/drivers/net/ethernet/broadcom/b44.c
> +++ b/drivers/net/ethernet/broadcom/b44.c
> @@ -2104,6 +2104,7 @@ static int b44_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
>  		bp->flags &= ~B44_FLAG_WOL_ENABLE;
>  	spin_unlock_irq(&bp->lock);
>  
> +	device_set_wakeup_enable(bp->sdev->dev, wol->wolopts & WAKE_MAGIC);
>  	return 0;
>  }
>  
> @@ -2452,6 +2453,7 @@ static int b44_init_one(struct ssb_device *sdev,
>  		}
>  	}
>  
> +	device_set_wakeup_capable(sdev->dev, true);
>  	netdev_info(dev, "%s %pM\n", DRV_DESCRIPTION, dev->dev_addr);
>  
>  	return 0;
> diff --git a/drivers/ssb/pcihost_wrapper.c b/drivers/ssb/pcihost_wrapper.c
> index 69161bb..410215c 100644
> --- a/drivers/ssb/pcihost_wrapper.c
> +++ b/drivers/ssb/pcihost_wrapper.c
> @@ -11,15 +11,17 @@
>   * Licensed under the GNU/GPL. See COPYING for details.
>   */
>  
> +#include <linux/pm.h>
>  #include <linux/pci.h>
>  #include <linux/export.h>
>  #include <linux/slab.h>
>  #include <linux/ssb/ssb.h>
>  
>  
> -#ifdef CONFIG_PM
> -static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state)
> +#ifdef CONFIG_PM_SLEEP
> +static int ssb_pcihost_suspend(struct device *d)
>  {
> +	struct pci_dev *dev = to_pci_dev(d);
>  	struct ssb_bus *ssb = pci_get_drvdata(dev);
>  	int err;
>  
> @@ -28,17 +30,23 @@ static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state)
>  		return err;
>  	pci_save_state(dev);
>  	pci_disable_device(dev);
> -	pci_set_power_state(dev, pci_choose_state(dev, state));
> +
> +	/* if there is a wakeup enabled child device on ssb bus,
> +	   enable pci wakeup posibility. */
> +	device_set_wakeup_enable(d, d->power.wakeup_path);
> +
> +	pci_prepare_to_sleep(dev);
>  
>  	return 0;
>  }
>  
> -static int ssb_pcihost_resume(struct pci_dev *dev)
> +static int ssb_pcihost_resume(struct device *d)
>  {
> +	struct pci_dev *dev = to_pci_dev(d);
>  	struct ssb_bus *ssb = pci_get_drvdata(dev);
>  	int err;
>  
> -	pci_set_power_state(dev, PCI_D0);
> +	pci_back_from_sleep(dev);
>  	err = pci_enable_device(dev);
>  	if (err)
>  		return err;
> @@ -49,10 +57,12 @@ static int ssb_pcihost_resume(struct pci_dev *dev)
>  
>  	return 0;
>  }
> -#else /* CONFIG_PM */
> -# define ssb_pcihost_suspend	NULL
> -# define ssb_pcihost_resume	NULL
> -#endif /* CONFIG_PM */
> +
> +static const struct dev_pm_ops ssb_pcihost_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(ssb_pcihost_suspend, ssb_pcihost_resume)
> +};
> +
> +#endif /* CONFIG_PM_SLEEP */
>  
>  static int ssb_pcihost_probe(struct pci_dev *dev,
>  			     const struct pci_device_id *id)
> @@ -115,8 +125,9 @@ int ssb_pcihost_register(struct pci_driver *driver)
>  {
>  	driver->probe = ssb_pcihost_probe;
>  	driver->remove = ssb_pcihost_remove;
> -	driver->suspend = ssb_pcihost_suspend;
> -	driver->resume = ssb_pcihost_resume;
> +#ifdef CONFIG_PM_SLEEP
> +	driver->driver.pm = &ssb_pcihost_pm_ops;
> +#endif
>  
>  	return pci_register_driver(driver);
>  }




-- 
Michael
-------------- next part --------------
A non-text attachment was scrubbed...
Name: b44_wol.patch
Type: text/x-patch
Size: 4228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/b43-dev/attachments/20141201/af183d99/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/b43-dev/attachments/20141201/af183d99/attachment.sig>


More information about the b43-dev mailing list