[PATCH 11/13] b43: HT-PHY: implement RSSI polling

[Rafał Miłecki]

Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
---
 drivers/net/wireless/b43/phy_ht.c |   96 ++++++++++++++++++++++++++++++++++++-
 drivers/net/wireless/b43/phy_ht.h |    5 ++
 2 files changed, 100 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/b43/phy_ht.c b/drivers/net/wireless/b43/phy_ht.c
index 363c64c..831dca4 100644
--- a/drivers/net/wireless/b43/phy_ht.c
+++ b/drivers/net/wireless/b43/phy_ht.c
@@ -388,6 +388,92 @@ static void b43_phy_ht_tx_tone(struct b43_wldev *dev)
 #endif
 
 /**************************************************
+ * RSSI
+ **************************************************/
+
+#if 0
+static void b43_phy_ht_rssi_select(struct b43_wldev *dev, u8 core_sel,
+				   u8 rssi_type)
+{
+	const u16 ctl_regs[3][2] = {
+		{ B43_PHY_HT_AFE_C1, B43_PHY_HT_AFE_C1_OVER, },
+		{ B43_PHY_HT_AFE_C2, B43_PHY_HT_AFE_C2_OVER, },
+		{ B43_PHY_HT_AFE_C3, B43_PHY_HT_AFE_C3_OVER, },
+	};
+	const u16 radio_r[] = { R2059_SYN, R2059_TXRX0, R2059_RXRX1, };
+	int core;
+
+	if (core_sel == 0) {
+		b43err(dev->wl, "RSSI selection for core off not implemented yet\n");
+	} else {
+		for (core = 0; core < 3; core++) {
+			/* Check if caller requested a one specific core */
+			if ((core_sel == 1 && core != 0) ||
+			    (core_sel == 2 && core != 1) ||
+			    (core_sel == 3 && core != 2))
+				continue;
+
+			switch (rssi_type) {
+			case 4:
+				b43_phy_set(dev, ctl_regs[core][0], 0x3 << 8);
+				b43_phy_set(dev, ctl_regs[core][0], 0x3 << 10);
+				b43_phy_set(dev, ctl_regs[core][1], 0x1 << 9);
+				b43_phy_set(dev, ctl_regs[core][1], 0x1 << 10);
+
+				b43_radio_set(dev, R2059_RXRX1 | 0xbf, 0x1);
+				b43_radio_write(dev, radio_r[core] | 0x159,
+						0x11);
+				break;
+			default:
+				b43err(dev->wl, "RSSI selection for type %d not implemented yet\n",
+				       rssi_type);
+			}
+		}
+	}
+}
+
+static void b43_phy_ht_poll_rssi(struct b43_wldev *dev, u8 type, s32 *buf,
+				 u8 nsamp)
+{
+	u16 phy_regs_values[12];
+	u16 phy_regs_to_save[] = {
+		B43_PHY_HT_AFE_C1, B43_PHY_HT_AFE_C1_OVER,
+		0x848, 0x841,
+		B43_PHY_HT_AFE_C2, B43_PHY_HT_AFE_C2_OVER,
+		0x868, 0x861,
+		B43_PHY_HT_AFE_C3, B43_PHY_HT_AFE_C3_OVER,
+		0x888, 0x881,
+	};
+	u16 tmp[3];
+	int i;
+
+	for (i = 0; i < 12; i++)
+		phy_regs_values[i] = b43_phy_read(dev, phy_regs_to_save[i]);
+
+	b43_phy_ht_rssi_select(dev, 5, type);
+
+	for (i = 0; i < 6; i++)
+		buf[i] = 0;
+
+	for (i = 0; i < nsamp; i++) {
+		tmp[0] = b43_phy_read(dev, B43_PHY_HT_RSSI_C1);
+		tmp[1] = b43_phy_read(dev, B43_PHY_HT_RSSI_C2);
+		tmp[2] = b43_phy_read(dev, B43_PHY_HT_RSSI_C3);
+
+		buf[0] += ((s8)((tmp[0] & 0x3F) << 2)) >> 2;
+		buf[1] += ((s8)(((tmp[0] >> 8) & 0x3F) << 2)) >> 2;
+		buf[2] += ((s8)((tmp[1] & 0x3F) << 2)) >> 2;
+		buf[3] += ((s8)(((tmp[1] >> 8) & 0x3F) << 2)) >> 2;
+		buf[4] += ((s8)((tmp[2] & 0x3F) << 2)) >> 2;
+		buf[5] += ((s8)(((tmp[2] >> 8) & 0x3F) << 2)) >> 2;
+	}
+
+	for (i = 0; i < 12; i++)
+		b43_phy_write(dev, phy_regs_to_save[i], phy_regs_values[i]);
+}
+#endif
+
+/**************************************************
  * Tx/Rx
  **************************************************/
 
@@ -454,12 +540,20 @@ static void b43_phy_ht_tx_power_ctl(struct b43_wldev *dev, bool enable)
 
 static void b43_phy_ht_tx_power_ctl_idle_tssi(struct b43_wldev *dev)
 {
+	struct b43_phy_ht *phy_ht = dev->phy.ht;
+	s32 rssi_buf[6];
+
 	/* TODO */
 
 	b43_phy_ht_tx_tone(dev);
 	udelay(20);
-	/* TODO: poll RSSI */
+	b43_phy_ht_poll_rssi(dev, 4, rssi_buf, 1);
 	b43_phy_ht_stop_playback(dev);
+	b43_phy_ht_reset_cca(dev);
+
+	phy_ht->idle_tssi[0] = rssi_buf[0] & 0xff;
+	phy_ht->idle_tssi[1] = rssi_buf[2] & 0xff;
+	phy_ht->idle_tssi[2] = rssi_buf[4] & 0xff;
 
 	/* TODO */
 }
diff --git a/drivers/net/wireless/b43/phy_ht.h b/drivers/net/wireless/b43/phy_ht.h
index c517958..165c501 100644
--- a/drivers/net/wireless/b43/phy_ht.h
+++ b/drivers/net/wireless/b43/phy_ht.h
@@ -36,6 +36,9 @@
 #define  B43_PHY_HT_TXPCTL_CMD_C1_PCTLEN	0x8000	/* TX power control enable */
 #define B43_PHY_HT_TXPCTL_CMD_C2		0x222
 #define  B43_PHY_HT_TXPCTL_CMD_C2_INIT		0x007F
+#define B43_PHY_HT_RSSI_C1			0x219
+#define B43_PHY_HT_RSSI_C2			0x21A
+#define B43_PHY_HT_RSSI_C3			0x21B
 
 #define B43_PHY_HT_C1_CLIP1THRES		B43_PHY_OFDM(0x00E)
 #define B43_PHY_HT_C2_CLIP1THRES		B43_PHY_OFDM(0x04E)
@@ -91,6 +94,8 @@ struct b43_phy_ht {
 	u8 tx_pwr_idx[3];
 
 	s32 bb_mult_save[3];
+
+	u8 idle_tssi[3];
 };
 
 
-- 
1.7.10.4