chip id 4318 regression: WARN_ON_ONCE(sdata->vif.hw_queue[i] >= n_queues))

[Andre Heider]

On Fri, Jun 8, 2012 at 5:59 PM, Johannes Berg <johannes at sipsolutions.net> wrote:
> On Fri, 2012-06-08 at 17:56 +0200, Andre Heider wrote:
>
>> > Hopefully this is better: http://p.sipsolutions.net/017d73ac0688f863.txt
>>
>> The previous patched all had the mac suspend failure. This one:
>>
>> drivers/net/wireless/b43/main.c: In function 'b43_qos_upload_all':
>> drivers/net/wireless/b43/main.c:3483: error: size of array 'type name'
>> is negative
>> drivers/net/wireless/b43/main.c: In function 'b43_qos_clear':
>> drivers/net/wireless/b43/main.c:3502: error: size of array 'type name'
>> is negative
>> drivers/net/wireless/b43/main.c: In function 'b43_op_conf_tx':
>> drivers/net/wireless/b43/main.c:3578: error: size of array 'type name'
>> is negative
>
> Huh, I thought I compiled it ... guess I had the wrong version.
>
> http://p.sipsolutions.net/511dda98892d2c9a.txt

It's getting warmer:

[    9.456216] b43-phy0: Loading OpenSource firmware version 410.31754
[    9.473798] b43-phy0: Hardware crypto acceleration not supported by firmware
[    9.491781] b43-phy0: QoS not supported by firmware
[    9.868750] b43-phy0 debug: Chip initialized
[    9.888580] b43-phy0 debug: PIO initialized
[    9.899273] b43-phy0 debug: QoS disabled
[   10.088420] b43-phy0 debug: Wireless interface started
[   10.212209] b43-phy0 debug: Adding Interface type 2
[   12.739776] wlan0: authenticate with d8:5d:4c:9c:31:14
[   12.796248] wlan0: send auth to d8:5d:4c:9c:31:14 (try 1/3)
[   12.811768] wlan0: authenticated
[   12.823310] wlan0: associate with d8:5d:4c:9c:31:14 (try 1/3)
[   12.844942] wlan0: RX AssocResp from d8:5d:4c:9c:31:14 (capab=0x411
status=0 aid=2)
[   12.863966] wlan0: associated
[   16.319097] ieee80211 phy0: wlan0: No probe response from AP
d8:5d:4c:9c:31:14 after 500ms, disconnecting.
[   16.349674] cfg80211: Calling CRDA for country: DE
[   17.597307] wlan0: authenticate with d8:5d:4c:9c:31:14
[   17.638399] wlan0: send auth to d8:5d:4c:9c:31:14 (try 1/3)
[   17.851085] wlan0: send auth to d8:5d:4c:9c:31:14 (try 2/3)
[   18.063086] wlan0: send auth to d8:5d:4c:9c:31:14 (try 3/3)
[   18.275081] wlan0: authentication with d8:5d:4c:9c:31:14 timed out

Tried it 3 times, always times out.