[PATCH 4/5] b43: N-PHY: implement RSSI calibration for rev3+
Rafał Miłecki
zajec5 at gmail.com
Tue Jan 3 16:49:20 EST 2012
Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
---
drivers/net/wireless/b43/phy_n.c | 192 ++++++++++++++++++++++++++++++++++++-
1 files changed, 186 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index c4c310d..d794ad9 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -85,6 +85,13 @@ static inline bool b43_nphy_ipa(struct b43_wldev *dev)
(dev->phy.n->ipa5g_on && band == IEEE80211_BAND_5GHZ));
}
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RxCoreGetState */
+static u8 b43_nphy_get_rx_core_state(struct b43_wldev *dev)
+{
+ return (b43_phy_read(dev, B43_NPHY_RFSEQCA) & B43_NPHY_RFSEQCA_RXEN) >>
+ B43_NPHY_RFSEQCA_RXEN_SHIFT;
+}
+
/**************************************************
* RF (just without b43_nphy_rf_control_intc_override)
**************************************************/
@@ -1290,6 +1297,185 @@ static int b43_nphy_poll_rssi(struct b43_wldev *dev, u8 type, s32 *buf,
return out;
}
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICalRev3 */
+static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
+{
+ struct b43_phy_n *nphy = dev->phy.n;
+
+ u16 saved_regs_phy_rfctl[2];
+ u16 saved_regs_phy[13];
+ u16 regs_to_store[] = {
+ B43_NPHY_AFECTL_OVER1, B43_NPHY_AFECTL_OVER,
+ B43_NPHY_AFECTL_C1, B43_NPHY_AFECTL_C2,
+ B43_NPHY_TXF_40CO_B1S1, B43_NPHY_RFCTL_OVER,
+ B43_NPHY_TXF_40CO_B1S0, B43_NPHY_TXF_40CO_B32S1,
+ B43_NPHY_RFCTL_CMD,
+ B43_NPHY_RFCTL_LUT_TRSW_UP1, B43_NPHY_RFCTL_LUT_TRSW_UP2,
+ B43_NPHY_RFCTL_RSSIO1, B43_NPHY_RFCTL_RSSIO2
+ };
+
+ u16 class;
+
+ u16 clip_state[2];
+ u16 clip_off[2] = { 0xFFFF, 0xFFFF };
+
+ u8 vcm_final = 0;
+ s8 offset[4];
+ s32 results[8][4] = { };
+ s32 results_min[4] = { };
+ s32 poll_results[4] = { };
+
+ u16 *rssical_radio_regs = NULL;
+ u16 *rssical_phy_regs = NULL;
+
+ u16 r; /* routing */
+ u8 rx_core_state;
+ u8 core, i, j;
+
+ class = b43_nphy_classifier(dev, 0, 0);
+ b43_nphy_classifier(dev, 7, 4);
+ b43_nphy_read_clip_detection(dev, clip_state);
+ b43_nphy_write_clip_detection(dev, clip_off);
+
+ saved_regs_phy_rfctl[0] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC1);
+ saved_regs_phy_rfctl[1] = b43_phy_read(dev, B43_NPHY_RFCTL_INTC2);
+ for (i = 0; i < ARRAY_SIZE(regs_to_store); i++)
+ saved_regs_phy[i] = b43_phy_read(dev, regs_to_store[i]);
+
+ b43_nphy_rf_control_intc_override(dev, 0, 0, 7);
+ b43_nphy_rf_control_intc_override(dev, 1, 1, 7);
+ b43_nphy_rf_control_override(dev, 0x1, 0, 0, false);
+ b43_nphy_rf_control_override(dev, 0x2, 1, 0, false);
+ b43_nphy_rf_control_override(dev, 0x80, 1, 0, false);
+ b43_nphy_rf_control_override(dev, 0x40, 1, 0, false);
+
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) {
+ b43_nphy_rf_control_override(dev, 0x20, 0, 0, false);
+ b43_nphy_rf_control_override(dev, 0x10, 1, 0, false);
+ } else {
+ b43_nphy_rf_control_override(dev, 0x10, 0, 0, false);
+ b43_nphy_rf_control_override(dev, 0x20, 1, 0, false);
+ }
+
+ rx_core_state = b43_nphy_get_rx_core_state(dev);
+ for (core = 0; core < 2; core++) {
+ if (!(rx_core_state & (1 << core)))
+ continue;
+ r = core ? B2056_RX1 : B2056_RX0;
+ b43_nphy_scale_offset_rssi(dev, 0, 0, i + 1, 0, 2);
+ b43_nphy_scale_offset_rssi(dev, 0, 0, i + 1, 1, 2);
+ for (i = 0; i < 8; i++) {
+ b43_radio_maskset(dev, r | B2056_RX_RSSI_MISC, 0xE3,
+ i << 2);
+ b43_nphy_poll_rssi(dev, 2, results[i], 8);
+ }
+ for (i = 0; i < 4; i++) {
+ s32 curr;
+ s32 mind = 40;
+ s32 minpoll = 249;
+ u8 minvcm = 0;
+ if (2 * core != i)
+ continue;
+ for (j = 0; j < 8; j++) {
+ curr = results[j][i] * results[j][i] +
+ results[j][i + 1] * results[j][i];
+ if (curr < mind) {
+ mind = curr;
+ minvcm = j;
+ }
+ if (results[j][i] < minpoll)
+ minpoll = results[j][i];
+ }
+ vcm_final = minvcm;
+ results_min[i] = minpoll;
+ }
+ b43_radio_maskset(dev, r | B2056_RX_RSSI_MISC, 0xE3,
+ vcm_final << 2);
+ for (i = 0; i < 4; i++) {
+ if (core != i / 2)
+ continue;
+ offset[i] = -results[vcm_final][i];
+ if (offset[i] < 0)
+ offset[i] = -((abs(offset[i]) + 4) / 8);
+ else
+ offset[i] = (offset[i] + 4) / 8;
+ if (results_min[i] == 248)
+ offset[i] = -32;
+ b43_nphy_scale_offset_rssi(dev, 0, offset[i],
+ (i / 2 == 0) ? 1 : 2,
+ (i % 2 == 0) ? 0 : 1,
+ 2);
+ }
+ }
+ for (core = 0; core < 2; core++) {
+ if (!(rx_core_state & (1 << core)))
+ continue;
+ for (i = 0; i < 2; i++) {
+ b43_nphy_scale_offset_rssi(dev, 0, 0, core + 1, 0, i);
+ b43_nphy_poll_rssi(dev, i, poll_results, 8);
+ for (j = 0; j < 4; j++) {
+ if (j / 2 == core)
+ offset[j] = 232 - poll_results[j];
+ if (offset[j] < 0)
+ offset[j] = -(abs(offset[j] + 4) / 8);
+ else
+ offset[j] = (offset[j] + 4) / 8;
+ b43_nphy_scale_offset_rssi(dev, 0,
+ offset[2 * core], core + 1, j % 2, i);
+ }
+ }
+ }
+
+ b43_phy_write(dev, B43_NPHY_RFCTL_INTC1, saved_regs_phy_rfctl[0]);
+ b43_phy_write(dev, B43_NPHY_RFCTL_INTC2, saved_regs_phy_rfctl[1]);
+
+ b43_nphy_force_rf_sequence(dev, B43_RFSEQ_RESET2RX);
+
+ b43_phy_set(dev, B43_NPHY_TXF_40CO_B1S1, 0x1);
+ b43_phy_set(dev, B43_NPHY_RFCTL_CMD, B43_NPHY_RFCTL_CMD_START);
+ b43_phy_mask(dev, B43_NPHY_TXF_40CO_B1S1, ~0x1);
+
+ b43_phy_set(dev, B43_NPHY_RFCTL_OVER, 0x1);
+ b43_phy_set(dev, B43_NPHY_RFCTL_CMD, B43_NPHY_RFCTL_CMD_RXTX);
+ b43_phy_mask(dev, B43_NPHY_TXF_40CO_B1S1, ~0x1);
+
+ for (i = 0; i < ARRAY_SIZE(regs_to_store); i++)
+ b43_phy_write(dev, regs_to_store[i], saved_regs_phy[i]);
+
+ /* Store for future configuration */
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+ rssical_radio_regs = nphy->rssical_cache.rssical_radio_regs_2G;
+ rssical_phy_regs = nphy->rssical_cache.rssical_phy_regs_2G;
+ } else {
+ rssical_radio_regs = nphy->rssical_cache.rssical_radio_regs_5G;
+ rssical_phy_regs = nphy->rssical_cache.rssical_phy_regs_5G;
+ }
+ rssical_radio_regs[0] = b43_radio_read(dev, 0x602B);
+ rssical_radio_regs[0] = b43_radio_read(dev, 0x702B);
+ rssical_phy_regs[0] = b43_phy_read(dev, B43_NPHY_RSSIMC_0I_RSSI_Z);
+ rssical_phy_regs[1] = b43_phy_read(dev, B43_NPHY_RSSIMC_0Q_RSSI_Z);
+ rssical_phy_regs[2] = b43_phy_read(dev, B43_NPHY_RSSIMC_1I_RSSI_Z);
+ rssical_phy_regs[3] = b43_phy_read(dev, B43_NPHY_RSSIMC_1Q_RSSI_Z);
+ rssical_phy_regs[4] = b43_phy_read(dev, B43_NPHY_RSSIMC_0I_RSSI_X);
+ rssical_phy_regs[5] = b43_phy_read(dev, B43_NPHY_RSSIMC_0Q_RSSI_X);
+ rssical_phy_regs[6] = b43_phy_read(dev, B43_NPHY_RSSIMC_1I_RSSI_X);
+ rssical_phy_regs[7] = b43_phy_read(dev, B43_NPHY_RSSIMC_1Q_RSSI_X);
+ rssical_phy_regs[8] = b43_phy_read(dev, B43_NPHY_RSSIMC_0I_RSSI_Y);
+ rssical_phy_regs[9] = b43_phy_read(dev, B43_NPHY_RSSIMC_0Q_RSSI_Y);
+ rssical_phy_regs[10] = b43_phy_read(dev, B43_NPHY_RSSIMC_1I_RSSI_Y);
+ rssical_phy_regs[11] = b43_phy_read(dev, B43_NPHY_RSSIMC_1Q_RSSI_Y);
+
+ /* Remember for which channel we store configuration */
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+ nphy->rssical_chanspec_2G.center_freq = dev->phy.channel_freq;
+ else
+ nphy->rssical_chanspec_5G.center_freq = dev->phy.channel_freq;
+
+ /* End of calibration, restore configuration */
+ b43_nphy_classifier(dev, 7, class);
+ b43_nphy_write_clip_detection(dev, clip_state);
+}
+
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICal */
static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type)
{
@@ -1454,12 +1640,6 @@ static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type)
b43_nphy_reset_cca(dev);
}
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICalRev3 */
-static void b43_nphy_rev3_rssi_cal(struct b43_wldev *dev)
-{
- /* TODO */
-}
-
/*
* RSSI Calibration
* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICal
--
1.7.3.4
More information about the b43-dev
mailing list