[PATCH 5/9] b43: bus: abstract SPROM
Rafał Miłecki
zajec5 at gmail.com
Tue May 17 20:06:39 EDT 2011
SPROM is another frequently used struct. We decided to share SPROM
struct between ssb na bcma as long as we will not need any hacks.
Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
---
drivers/net/wireless/b43/bus.c | 2 +
drivers/net/wireless/b43/bus.h | 2 +
drivers/net/wireless/b43/leds.c | 8 +-
drivers/net/wireless/b43/lo.c | 4 +-
drivers/net/wireless/b43/main.c | 10 ++--
drivers/net/wireless/b43/phy_a.c | 14 ++--
drivers/net/wireless/b43/phy_g.c | 36 ++++++------
drivers/net/wireless/b43/phy_lp.c | 93 ++++++++++++++++---------------
drivers/net/wireless/b43/phy_n.c | 18 +++---
drivers/net/wireless/b43/tables_lpphy.c | 12 ++--
drivers/net/wireless/b43/wa.c | 5 +-
drivers/net/wireless/b43/xmit.c | 2 +-
12 files changed, 107 insertions(+), 99 deletions(-)
diff --git a/drivers/net/wireless/b43/bus.c b/drivers/net/wireless/b43/bus.c
index be3d206..c116f12 100644
--- a/drivers/net/wireless/b43/bus.c
+++ b/drivers/net/wireless/b43/bus.c
@@ -70,6 +70,8 @@ struct b43_bus_dev *b43_bus_dev_ssb_init(struct ssb_device *sdev)
dev->block_read = b43_bus_ssb_block_read;
dev->block_write = b43_bus_ssb_block_write;
+ dev->bus_sprom = &sdev->bus->sprom;
+
dev->core_id = sdev->id.coreid;
dev->core_rev = sdev->id.revision;
diff --git a/drivers/net/wireless/b43/bus.h b/drivers/net/wireless/b43/bus.h
index 742f084..6d575d6 100644
--- a/drivers/net/wireless/b43/bus.h
+++ b/drivers/net/wireless/b43/bus.h
@@ -20,6 +20,8 @@ struct b43_bus_dev {
void (*block_write)(struct b43_bus_dev *dev, const void *buffer,
size_t count, u16 offset, u8 reg_width);
+ struct ssb_sprom *bus_sprom;
+
u16 core_id;
u8 core_rev;
};
diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c
index 0cafafe..26d37ef 100644
--- a/drivers/net/wireless/b43/leds.c
+++ b/drivers/net/wireless/b43/leds.c
@@ -218,10 +218,10 @@ static void b43_led_get_sprominfo(struct b43_wldev *dev,
struct ssb_bus *bus = dev->sdev->bus;
u8 sprom[4];
- sprom[0] = bus->sprom.gpio0;
- sprom[1] = bus->sprom.gpio1;
- sprom[2] = bus->sprom.gpio2;
- sprom[3] = bus->sprom.gpio3;
+ sprom[0] = dev->dev->bus_sprom->gpio0;
+ sprom[1] = dev->dev->bus_sprom->gpio1;
+ sprom[2] = dev->dev->bus_sprom->gpio2;
+ sprom[3] = dev->dev->bus_sprom->gpio3;
if (sprom[led_index] == 0xFF) {
/* There is no LED information in the SPROM
diff --git a/drivers/net/wireless/b43/lo.c b/drivers/net/wireless/b43/lo.c
index 2ef7d4b..b32efd4 100644
--- a/drivers/net/wireless/b43/lo.c
+++ b/drivers/net/wireless/b43/lo.c
@@ -98,7 +98,7 @@ static u16 lo_measure_feedthrough(struct b43_wldev *dev,
rfover |= pga;
rfover |= lna;
rfover |= trsw_rx;
- if ((dev->sdev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA)
+ if ((dev->dev->bus_sprom->boardflags_lo & B43_BFL_EXTLNA)
&& phy->rev > 6)
rfover |= B43_PHY_RFOVERVAL_EXTLNA;
@@ -387,7 +387,7 @@ struct lo_g_saved_values {
static void lo_measure_setup(struct b43_wldev *dev,
struct lo_g_saved_values *sav)
{
- struct ssb_sprom *sprom = &dev->sdev->bus->sprom;
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
struct b43_phy *phy = &dev->phy;
struct b43_phy_g *gphy = phy->g;
struct b43_txpower_lo_control *lo = gphy->lo_control;
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 971ec1b..0f3a104 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1427,9 +1427,9 @@ u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev,
/* Get the mask of available antennas. */
if (dev->phy.gmode)
- antenna_mask = dev->sdev->bus->sprom.ant_available_bg;
+ antenna_mask = dev->dev->bus_sprom->ant_available_bg;
else
- antenna_mask = dev->sdev->bus->sprom.ant_available_a;
+ antenna_mask = dev->dev->bus_sprom->ant_available_a;
if (!(antenna_mask & (1 << (antenna_nr - 1)))) {
/* This antenna is not available. Fall back to default. */
@@ -2599,7 +2599,7 @@ static int b43_gpio_init(struct b43_wldev *dev)
mask |= 0x0180;
set |= 0x0180;
}
- if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) {
+ if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) {
b43_write16(dev, B43_MMIO_GPIO_MASK,
b43_read16(dev, B43_MMIO_GPIO_MASK)
| 0x0200);
@@ -4204,7 +4204,7 @@ static void setup_struct_wldev_for_init(struct b43_wldev *dev)
static void b43_bluetooth_coext_enable(struct b43_wldev *dev)
{
- struct ssb_sprom *sprom = &dev->sdev->bus->sprom;
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
u64 hf;
if (!modparam_btcoex)
@@ -4318,7 +4318,7 @@ static void b43_wireless_core_exit(struct b43_wldev *dev)
static int b43_wireless_core_init(struct b43_wldev *dev)
{
struct ssb_bus *bus = dev->sdev->bus;
- struct ssb_sprom *sprom = &bus->sprom;
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
struct b43_phy *phy = &dev->phy;
int err;
u64 hf;
diff --git a/drivers/net/wireless/b43/phy_a.c b/drivers/net/wireless/b43/phy_a.c
index b01c8ce..821b516 100644
--- a/drivers/net/wireless/b43/phy_a.c
+++ b/drivers/net/wireless/b43/phy_a.c
@@ -311,7 +311,7 @@ void b43_phy_inita(struct b43_wldev *dev)
}
if ((phy->type == B43_PHYTYPE_G) &&
- (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)) {
+ (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL)) {
b43_phy_maskset(dev, B43_PHY_OFDM(0x6E), 0xE000, 0x3CF);
}
}
@@ -323,17 +323,17 @@ static int b43_aphy_init_tssi2dbm_table(struct b43_wldev *dev)
struct b43_phy_a *aphy = phy->a;
s16 pab0, pab1, pab2;
- pab0 = (s16) (dev->sdev->bus->sprom.pa1b0);
- pab1 = (s16) (dev->sdev->bus->sprom.pa1b1);
- pab2 = (s16) (dev->sdev->bus->sprom.pa1b2);
+ pab0 = (s16) (dev->dev->bus_sprom->pa1b0);
+ pab1 = (s16) (dev->dev->bus_sprom->pa1b1);
+ pab2 = (s16) (dev->dev->bus_sprom->pa1b2);
if (pab0 != 0 && pab1 != 0 && pab2 != 0 &&
pab0 != -1 && pab1 != -1 && pab2 != -1) {
/* The pabX values are set in SPROM. Use them. */
- if ((s8) dev->sdev->bus->sprom.itssi_a != 0 &&
- (s8) dev->sdev->bus->sprom.itssi_a != -1)
+ if ((s8) dev->dev->bus_sprom->itssi_a != 0 &&
+ (s8) dev->dev->bus_sprom->itssi_a != -1)
aphy->tgt_idle_tssi =
- (s8) (dev->sdev->bus->sprom.itssi_a);
+ (s8) (dev->dev->bus_sprom->itssi_a);
else
aphy->tgt_idle_tssi = 62;
aphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0,
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index 1758a28..ccb02af 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -718,7 +718,7 @@ static void b43_calc_nrssi_threshold(struct b43_wldev *dev)
B43_WARN_ON(phy->type != B43_PHYTYPE_G);
if (!phy->gmode ||
- !(dev->sdev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) {
+ !(dev->dev->bus_sprom->boardflags_lo & B43_BFL_RSSI)) {
tmp16 = b43_nrssi_hw_read(dev, 0x20);
if (tmp16 >= 0x20)
tmp16 -= 0x40;
@@ -1114,7 +1114,7 @@ static u16 radio2050_rfover_val(struct b43_wldev *dev,
{
struct b43_phy *phy = &dev->phy;
struct b43_phy_g *gphy = phy->g;
- struct ssb_sprom *sprom = &(dev->sdev->bus->sprom);
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
if (!phy->gmode)
return 0;
@@ -1620,7 +1620,7 @@ static void b43_phy_initb6(struct b43_wldev *dev)
b43_radio_write16(dev, 0x5A, 0x88);
b43_radio_write16(dev, 0x5B, 0x6B);
b43_radio_write16(dev, 0x5C, 0x0F);
- if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_ALTIQ) {
+ if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_ALTIQ) {
b43_radio_write16(dev, 0x5D, 0xFA);
b43_radio_write16(dev, 0x5E, 0xD8);
} else {
@@ -1787,7 +1787,7 @@ static void b43_calc_loopback_gain(struct b43_wldev *dev)
b43_phy_set(dev, B43_PHY_RFOVER, 0x0100);
b43_phy_mask(dev, B43_PHY_RFOVERVAL, 0xCFFF);
- if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) {
+ if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_EXTLNA) {
if (phy->rev >= 7) {
b43_phy_set(dev, B43_PHY_RFOVER, 0x0800);
b43_phy_set(dev, B43_PHY_RFOVERVAL, 0x8000);
@@ -2053,7 +2053,7 @@ static void b43_phy_initg(struct b43_wldev *dev)
if (phy->rev >= 6) {
b43_phy_maskset(dev, B43_PHY_CCK(0x36), 0x0FFF, (gphy->lo_control->tx_bias << 12));
}
- if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)
+ if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL)
b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075);
else
b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F);
@@ -2066,7 +2066,7 @@ static void b43_phy_initg(struct b43_wldev *dev)
b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078);
}
- if (!(dev->sdev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) {
+ if (!(dev->dev->bus_sprom->boardflags_lo & B43_BFL_RSSI)) {
/* The specs state to update the NRSSI LT with
* the value 0x7FFFFFFF here. I think that is some weird
* compiler optimization in the original driver.
@@ -2105,7 +2105,7 @@ void b43_gphy_channel_switch(struct b43_wldev *dev,
b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel));
if (channel == 14) {
- if (dev->sdev->bus->sprom.country_code ==
+ if (dev->dev->bus_sprom->country_code ==
SSB_SPROM1CCODE_JAPAN)
b43_hf_write(dev,
b43_hf_read(dev) & ~B43_HF_ACPR);
@@ -2384,9 +2384,9 @@ static int b43_gphy_init_tssi2dbm_table(struct b43_wldev *dev)
struct b43_phy_g *gphy = phy->g;
s16 pab0, pab1, pab2;
- pab0 = (s16) (dev->sdev->bus->sprom.pa0b0);
- pab1 = (s16) (dev->sdev->bus->sprom.pa0b1);
- pab2 = (s16) (dev->sdev->bus->sprom.pa0b2);
+ pab0 = (s16) (dev->dev->bus_sprom->pa0b0);
+ pab1 = (s16) (dev->dev->bus_sprom->pa0b1);
+ pab2 = (s16) (dev->dev->bus_sprom->pa0b2);
B43_WARN_ON((dev->sdev->bus->chip_id == 0x4301) &&
(phy->radio_ver != 0x2050)); /* Not supported anymore */
@@ -2396,10 +2396,10 @@ static int b43_gphy_init_tssi2dbm_table(struct b43_wldev *dev)
if (pab0 != 0 && pab1 != 0 && pab2 != 0 &&
pab0 != -1 && pab1 != -1 && pab2 != -1) {
/* The pabX values are set in SPROM. Use them. */
- if ((s8) dev->sdev->bus->sprom.itssi_bg != 0 &&
- (s8) dev->sdev->bus->sprom.itssi_bg != -1) {
+ if ((s8) dev->dev->bus_sprom->itssi_bg != 0 &&
+ (s8) dev->dev->bus_sprom->itssi_bg != -1) {
gphy->tgt_idle_tssi =
- (s8) (dev->sdev->bus->sprom.itssi_bg);
+ (s8) (dev->dev->bus_sprom->itssi_bg);
} else
gphy->tgt_idle_tssi = 62;
gphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0,
@@ -2840,7 +2840,7 @@ static void b43_gphy_op_adjust_txpower(struct b43_wldev *dev)
B43_TXCTL_TXMIX;
rfatt += 2;
bbatt += 2;
- } else if (dev->sdev->bus->sprom.
+ } else if (dev->dev->bus_sprom->
boardflags_lo &
B43_BFL_PACTRL) {
bbatt += 4 * (rfatt - 2);
@@ -2914,14 +2914,14 @@ static enum b43_txpwr_result b43_gphy_op_recalc_txpower(struct b43_wldev *dev,
estimated_pwr = b43_gphy_estimate_power_out(dev, average_tssi);
B43_WARN_ON(phy->type != B43_PHYTYPE_G);
- max_pwr = dev->sdev->bus->sprom.maxpwr_bg;
- if (dev->sdev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)
+ max_pwr = dev->dev->bus_sprom->maxpwr_bg;
+ if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL)
max_pwr -= 3; /* minus 0.75 */
if (unlikely(max_pwr >= INT_TO_Q52(30/*dBm*/))) {
b43warn(dev->wl,
"Invalid max-TX-power value in SPROM.\n");
max_pwr = INT_TO_Q52(20); /* fake it */
- dev->sdev->bus->sprom.maxpwr_bg = max_pwr;
+ dev->dev->bus_sprom->maxpwr_bg = max_pwr;
}
/* Get desired power (in Q5.2) */
@@ -3014,7 +3014,7 @@ static void b43_gphy_op_pwork_60sec(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
- if (!(dev->sdev->bus->sprom.boardflags_lo & B43_BFL_RSSI))
+ if (!(dev->dev->bus_sprom->boardflags_lo & B43_BFL_RSSI))
return;
b43_mac_suspend(dev);
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 012c8da..41d0281 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -85,39 +85,39 @@ static void b43_lpphy_op_free(struct b43_wldev *dev)
/* http://bcm-v4.sipsolutions.net/802.11/PHY/LP/ReadBandSrom */
static void lpphy_read_band_sprom(struct b43_wldev *dev)
{
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
struct b43_phy_lp *lpphy = dev->phy.lp;
- struct ssb_bus *bus = dev->sdev->bus;
u16 cckpo, maxpwr;
u32 ofdmpo;
int i;
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
- lpphy->tx_isolation_med_band = bus->sprom.tri2g;
- lpphy->bx_arch = bus->sprom.bxa2g;
- lpphy->rx_pwr_offset = bus->sprom.rxpo2g;
- lpphy->rssi_vf = bus->sprom.rssismf2g;
- lpphy->rssi_vc = bus->sprom.rssismc2g;
- lpphy->rssi_gs = bus->sprom.rssisav2g;
- lpphy->txpa[0] = bus->sprom.pa0b0;
- lpphy->txpa[1] = bus->sprom.pa0b1;
- lpphy->txpa[2] = bus->sprom.pa0b2;
- maxpwr = bus->sprom.maxpwr_bg;
+ lpphy->tx_isolation_med_band = sprom->tri2g;
+ lpphy->bx_arch = sprom->bxa2g;
+ lpphy->rx_pwr_offset = sprom->rxpo2g;
+ lpphy->rssi_vf = sprom->rssismf2g;
+ lpphy->rssi_vc = sprom->rssismc2g;
+ lpphy->rssi_gs = sprom->rssisav2g;
+ lpphy->txpa[0] = sprom->pa0b0;
+ lpphy->txpa[1] = sprom->pa0b1;
+ lpphy->txpa[2] = sprom->pa0b2;
+ maxpwr = sprom->maxpwr_bg;
lpphy->max_tx_pwr_med_band = maxpwr;
- cckpo = bus->sprom.cck2gpo;
+ cckpo = sprom->cck2gpo;
/*
* We don't read SPROM's opo as specs say. On rev8 SPROMs
* opo == ofdm2gpo and we don't know any SSB with LP-PHY
* and SPROM rev below 8.
*/
- B43_WARN_ON(bus->sprom.revision < 8);
- ofdmpo = bus->sprom.ofdm2gpo;
+ B43_WARN_ON(sprom->revision < 8);
+ ofdmpo = sprom->ofdm2gpo;
if (cckpo) {
for (i = 0; i < 4; i++) {
lpphy->tx_max_rate[i] =
maxpwr - (ofdmpo & 0xF) * 2;
ofdmpo >>= 4;
}
- ofdmpo = bus->sprom.ofdm2gpo;
+ ofdmpo = sprom->ofdm2gpo;
for (i = 4; i < 15; i++) {
lpphy->tx_max_rate[i] =
maxpwr - (ofdmpo & 0xF) * 2;
@@ -131,39 +131,39 @@ static void lpphy_read_band_sprom(struct b43_wldev *dev)
lpphy->tx_max_rate[i] = maxpwr - ofdmpo;
}
} else { /* 5GHz */
- lpphy->tx_isolation_low_band = bus->sprom.tri5gl;
- lpphy->tx_isolation_med_band = bus->sprom.tri5g;
- lpphy->tx_isolation_hi_band = bus->sprom.tri5gh;
- lpphy->bx_arch = bus->sprom.bxa5g;
- lpphy->rx_pwr_offset = bus->sprom.rxpo5g;
- lpphy->rssi_vf = bus->sprom.rssismf5g;
- lpphy->rssi_vc = bus->sprom.rssismc5g;
- lpphy->rssi_gs = bus->sprom.rssisav5g;
- lpphy->txpa[0] = bus->sprom.pa1b0;
- lpphy->txpa[1] = bus->sprom.pa1b1;
- lpphy->txpa[2] = bus->sprom.pa1b2;
- lpphy->txpal[0] = bus->sprom.pa1lob0;
- lpphy->txpal[1] = bus->sprom.pa1lob1;
- lpphy->txpal[2] = bus->sprom.pa1lob2;
- lpphy->txpah[0] = bus->sprom.pa1hib0;
- lpphy->txpah[1] = bus->sprom.pa1hib1;
- lpphy->txpah[2] = bus->sprom.pa1hib2;
- maxpwr = bus->sprom.maxpwr_al;
- ofdmpo = bus->sprom.ofdm5glpo;
+ lpphy->tx_isolation_low_band = sprom->tri5gl;
+ lpphy->tx_isolation_med_band = sprom->tri5g;
+ lpphy->tx_isolation_hi_band = sprom->tri5gh;
+ lpphy->bx_arch = sprom->bxa5g;
+ lpphy->rx_pwr_offset = sprom->rxpo5g;
+ lpphy->rssi_vf = sprom->rssismf5g;
+ lpphy->rssi_vc = sprom->rssismc5g;
+ lpphy->rssi_gs = sprom->rssisav5g;
+ lpphy->txpa[0] = sprom->pa1b0;
+ lpphy->txpa[1] = sprom->pa1b1;
+ lpphy->txpa[2] = sprom->pa1b2;
+ lpphy->txpal[0] = sprom->pa1lob0;
+ lpphy->txpal[1] = sprom->pa1lob1;
+ lpphy->txpal[2] = sprom->pa1lob2;
+ lpphy->txpah[0] = sprom->pa1hib0;
+ lpphy->txpah[1] = sprom->pa1hib1;
+ lpphy->txpah[2] = sprom->pa1hib2;
+ maxpwr = sprom->maxpwr_al;
+ ofdmpo = sprom->ofdm5glpo;
lpphy->max_tx_pwr_low_band = maxpwr;
for (i = 4; i < 12; i++) {
lpphy->tx_max_ratel[i] = maxpwr - (ofdmpo & 0xF) * 2;
ofdmpo >>= 4;
}
- maxpwr = bus->sprom.maxpwr_a;
- ofdmpo = bus->sprom.ofdm5gpo;
+ maxpwr = sprom->maxpwr_a;
+ ofdmpo = sprom->ofdm5gpo;
lpphy->max_tx_pwr_med_band = maxpwr;
for (i = 4; i < 12; i++) {
lpphy->tx_max_rate[i] = maxpwr - (ofdmpo & 0xF) * 2;
ofdmpo >>= 4;
}
- maxpwr = bus->sprom.maxpwr_ah;
- ofdmpo = bus->sprom.ofdm5ghpo;
+ maxpwr = sprom->maxpwr_ah;
+ ofdmpo = sprom->ofdm5ghpo;
lpphy->max_tx_pwr_hi_band = maxpwr;
for (i = 4; i < 12; i++) {
lpphy->tx_max_rateh[i] = maxpwr - (ofdmpo & 0xF) * 2;
@@ -215,6 +215,7 @@ static void lpphy_table_init(struct b43_wldev *dev)
static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
{
struct ssb_bus *bus = dev->sdev->bus;
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
struct b43_phy_lp *lpphy = dev->phy.lp;
u16 tmp, tmp2;
@@ -242,9 +243,9 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
b43_phy_maskset(dev, B43_LPPHY_CRS_ED_THRESH, 0x00FF, 0xAD00);
b43_phy_maskset(dev, B43_LPPHY_INPUT_PWRDB,
0xFF00, lpphy->rx_pwr_offset);
- if ((bus->sprom.boardflags_lo & B43_BFL_FEM) &&
+ if ((sprom->boardflags_lo & B43_BFL_FEM) &&
((b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) ||
- (bus->sprom.boardflags_hi & B43_BFH_PAREF))) {
+ (sprom->boardflags_hi & B43_BFH_PAREF))) {
ssb_pmu_set_ldo_voltage(&bus->chipco, LDO_PAREF, 0x28);
ssb_pmu_set_ldo_paref(&bus->chipco, true);
if (dev->phy.rev == 0) {
@@ -260,7 +261,7 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
}
tmp = lpphy->rssi_vf | lpphy->rssi_vc << 4 | 0xA000;
b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_0, tmp);
- if (bus->sprom.boardflags_hi & B43_BFH_RSSIINV)
+ if (sprom->boardflags_hi & B43_BFH_RSSIINV)
b43_phy_maskset(dev, B43_LPPHY_AFE_RSSI_CTL_1, 0xF000, 0x0AAA);
else
b43_phy_maskset(dev, B43_LPPHY_AFE_RSSI_CTL_1, 0xF000, 0x02AA);
@@ -268,7 +269,7 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
b43_phy_maskset(dev, B43_LPPHY_RX_RADIO_CTL,
0xFFF9, (lpphy->bx_arch << 1));
if (dev->phy.rev == 1 &&
- (bus->sprom.boardflags_hi & B43_BFH_FEM_BT)) {
+ (sprom->boardflags_hi & B43_BFH_FEM_BT)) {
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x000A);
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0x3F00, 0x0900);
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x000A);
@@ -287,7 +288,7 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_8, 0xC0FF, 0x0B00);
} else if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ ||
(bus->boardinfo.type == 0x048A) || ((dev->phy.rev == 0) &&
- (bus->sprom.boardflags_lo & B43_BFL_FEM))) {
+ (sprom->boardflags_lo & B43_BFL_FEM))) {
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x0001);
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0400);
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x0001);
@@ -297,7 +298,7 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x0002);
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0A00);
} else if (dev->phy.rev == 1 ||
- (bus->sprom.boardflags_lo & B43_BFL_FEM)) {
+ (sprom->boardflags_lo & B43_BFL_FEM)) {
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xFFC0, 0x0004);
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_1, 0xC0FF, 0x0800);
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_2, 0xFFC0, 0x0004);
@@ -316,13 +317,13 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xFFC0, 0x0006);
b43_phy_maskset(dev, B43_LPPHY_TR_LOOKUP_4, 0xC0FF, 0x0700);
}
- if (dev->phy.rev == 1 && (bus->sprom.boardflags_hi & B43_BFH_PAREF)) {
+ if (dev->phy.rev == 1 && (sprom->boardflags_hi & B43_BFH_PAREF)) {
b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_5, B43_LPPHY_TR_LOOKUP_1);
b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_6, B43_LPPHY_TR_LOOKUP_2);
b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_7, B43_LPPHY_TR_LOOKUP_3);
b43_phy_copy(dev, B43_LPPHY_TR_LOOKUP_8, B43_LPPHY_TR_LOOKUP_4);
}
- if ((bus->sprom.boardflags_hi & B43_BFH_FEM_BT) &&
+ if ((sprom->boardflags_hi & B43_BFH_FEM_BT) &&
(bus->chip_id == 0x5354) &&
(bus->chip_package == SSB_CHIPPACK_BCM4712S)) {
b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x0006);
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 40f1db7..99ea191 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -299,7 +299,7 @@ static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable)
static void b43_nphy_tx_power_fix(struct b43_wldev *dev)
{
struct b43_phy_n *nphy = dev->phy.n;
- struct ssb_sprom *sprom = &(dev->sdev->bus->sprom);
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
u8 txpi[2], bbmult, i;
u16 tmp, radio_gain, dac_gain;
@@ -423,7 +423,7 @@ static void b43_radio_init2055_pre(struct b43_wldev *dev)
static void b43_radio_init2055_post(struct b43_wldev *dev)
{
struct b43_phy_n *nphy = dev->phy.n;
- struct ssb_sprom *sprom = &(dev->sdev->bus->sprom);
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
struct ssb_boardinfo *binfo = &(dev->sdev->bus->boardinfo);
int i;
u16 val;
@@ -1168,7 +1168,7 @@ static void b43_nphy_adjust_lna_gain_table(struct b43_wldev *dev)
static void b43_nphy_gain_ctrl_workarounds(struct b43_wldev *dev)
{
struct b43_phy_n *nphy = dev->phy.n;
- struct ssb_sprom *sprom = &(dev->sdev->bus->sprom);
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
/* PHY rev 0, 1, 2 */
u8 i, j;
@@ -1374,6 +1374,7 @@ static void b43_nphy_gain_ctrl_workarounds(struct b43_wldev *dev)
static void b43_nphy_workarounds(struct b43_wldev *dev)
{
struct ssb_bus *bus = dev->sdev->bus;
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
struct b43_phy *phy = &dev->phy;
struct b43_phy_n *nphy = phy->n;
@@ -1443,9 +1444,9 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
/* N PHY WAR TX Chain Update with hw_phytxchain as argument */
- if ((bus->sprom.boardflags2_lo & B43_BFL2_APLL_WAR &&
+ if ((sprom->boardflags2_lo & B43_BFL2_APLL_WAR &&
b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) ||
- (bus->sprom.boardflags2_lo & B43_BFL2_GPLL_WAR &&
+ (sprom->boardflags2_lo & B43_BFL2_GPLL_WAR &&
b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ))
tmp32 = 0x00088888;
else
@@ -1503,7 +1504,7 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO2, 0x2D8);
b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2, 0x301);
- if (bus->sprom.boardflags2_lo & 0x100 &&
+ if (sprom->boardflags2_lo & 0x100 &&
bus->boardinfo.type == 0x8B) {
delays1[0] = 0x1;
delays1[5] = 0x14;
@@ -3587,6 +3588,7 @@ static void b43_nphy_set_rx_core_state(struct b43_wldev *dev, u8 mask)
int b43_phy_initn(struct b43_wldev *dev)
{
struct ssb_bus *bus = dev->sdev->bus;
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
struct b43_phy *phy = &dev->phy;
struct b43_phy_n *nphy = phy->n;
u8 tx_pwr_state;
@@ -3599,7 +3601,7 @@ int b43_phy_initn(struct b43_wldev *dev)
bool do_cal = false;
if ((dev->phy.rev >= 3) &&
- (bus->sprom.boardflags_lo & B43_BFL_EXTLNA) &&
+ (sprom->boardflags_lo & B43_BFL_EXTLNA) &&
(b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)) {
chipco_set32(&dev->sdev->bus->chipco, SSB_CHIPCO_CHIPCTL, 0x40);
}
@@ -3639,7 +3641,7 @@ int b43_phy_initn(struct b43_wldev *dev)
b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_20M, 0x20);
b43_phy_write(dev, B43_NPHY_AFESEQ_TX2RX_PUD_40M, 0x20);
- if (bus->sprom.boardflags2_lo & 0x100 ||
+ if (sprom->boardflags2_lo & 0x100 ||
(bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
bus->boardinfo.type == 0x8B))
b43_phy_write(dev, B43_NPHY_TXREALFD, 0xA0);
diff --git a/drivers/net/wireless/b43/tables_lpphy.c b/drivers/net/wireless/b43/tables_lpphy.c
index 59df3c6..aa11755 100644
--- a/drivers/net/wireless/b43/tables_lpphy.c
+++ b/drivers/net/wireless/b43/tables_lpphy.c
@@ -2416,12 +2416,12 @@ void lpphy_write_gain_table_bulk(struct b43_wldev *dev, int offset, int count,
void lpphy_init_tx_gain_table(struct b43_wldev *dev)
{
- struct ssb_bus *bus = dev->sdev->bus;
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
switch (dev->phy.rev) {
case 0:
- if ((bus->sprom.boardflags_hi & B43_BFH_NOPA) ||
- (bus->sprom.boardflags_lo & B43_BFL_HGPA))
+ if ((sprom->boardflags_hi & B43_BFH_NOPA) ||
+ (sprom->boardflags_lo & B43_BFL_HGPA))
lpphy_write_gain_table_bulk(dev, 0, 128,
lpphy_rev0_nopa_tx_gain_table);
else if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
@@ -2432,8 +2432,8 @@ void lpphy_init_tx_gain_table(struct b43_wldev *dev)
lpphy_rev0_5ghz_tx_gain_table);
break;
case 1:
- if ((bus->sprom.boardflags_hi & B43_BFH_NOPA) ||
- (bus->sprom.boardflags_lo & B43_BFL_HGPA))
+ if ((sprom->boardflags_hi & B43_BFH_NOPA) ||
+ (sprom->boardflags_lo & B43_BFL_HGPA))
lpphy_write_gain_table_bulk(dev, 0, 128,
lpphy_rev1_nopa_tx_gain_table);
else if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
@@ -2444,7 +2444,7 @@ void lpphy_init_tx_gain_table(struct b43_wldev *dev)
lpphy_rev1_5ghz_tx_gain_table);
break;
default:
- if (bus->sprom.boardflags_hi & B43_BFH_NOPA)
+ if (sprom->boardflags_hi & B43_BFH_NOPA)
lpphy_write_gain_table_bulk(dev, 0, 128,
lpphy_rev2_nopa_tx_gain_table);
else if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
diff --git a/drivers/net/wireless/b43/wa.c b/drivers/net/wireless/b43/wa.c
index 8f4db44..2829ee1 100644
--- a/drivers/net/wireless/b43/wa.c
+++ b/drivers/net/wireless/b43/wa.c
@@ -487,6 +487,7 @@ static void b43_wa_boards_a(struct b43_wldev *dev)
static void b43_wa_boards_g(struct b43_wldev *dev)
{
struct ssb_bus *bus = dev->sdev->bus;
+ struct ssb_sprom *sprom = dev->dev->bus_sprom;
struct b43_phy *phy = &dev->phy;
if (bus->boardinfo.vendor != SSB_BOARDVENDOR_BCM ||
@@ -498,7 +499,7 @@ static void b43_wa_boards_g(struct b43_wldev *dev)
} else {
b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX, 1, 0x0002);
b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX, 2, 0x0001);
- if ((bus->sprom.boardflags_lo & B43_BFL_EXTLNA) &&
+ if ((sprom->boardflags_lo & B43_BFL_EXTLNA) &&
(phy->rev >= 7)) {
b43_phy_mask(dev, B43_PHY_EXTG(0x11), 0xF7FF);
b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX, 0x0020, 0x0001);
@@ -510,7 +511,7 @@ static void b43_wa_boards_g(struct b43_wldev *dev)
}
}
}
- if (bus->sprom.boardflags_lo & B43_BFL_FEM) {
+ if (sprom->boardflags_lo & B43_BFL_FEM) {
b43_phy_write(dev, B43_PHY_GTABCTL, 0x3120);
b43_phy_write(dev, B43_PHY_GTABDATA, 0xC480);
}
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index c8f99ae..488b898 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -547,7 +547,7 @@ static s8 b43_rssi_postprocess(struct b43_wldev *dev,
else
tmp -= 3;
} else {
- if (dev->sdev->bus->sprom.
+ if (dev->dev->bus_sprom->
boardflags_lo & B43_BFL_RSSI) {
if (in_rssi > 63)
in_rssi = 63;
--
1.7.3.4
More information about the b43-dev
mailing list