[RFC v2 11/12] bcm47xx: add support for bcma bus
Hauke Mehrtens
hauke at hauke-m.de
Sun Jun 19 17:50:08 EDT 2011
This patch add support for the bcma bus. Broadcom uses only Mips 74K
CPUs on the new SoC and on the old ons using ssb bus there are no Mips
74K CPUs.
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
arch/mips/Kconfig | 4 ++
arch/mips/bcm47xx/gpio.c | 9 ++++++
arch/mips/bcm47xx/nvram.c | 6 ++++
arch/mips/bcm47xx/serial.c | 25 ++++++++++++++++
arch/mips/bcm47xx/setup.c | 41 ++++++++++++++++++++++++-
arch/mips/bcm47xx/time.c | 3 ++
arch/mips/include/asm/mach-bcm47xx/bcm47xx.h | 4 ++
arch/mips/include/asm/mach-bcm47xx/gpio.h | 18 +++++++++++
drivers/watchdog/bcm47xx_wdt.c | 7 ++++
9 files changed, 115 insertions(+), 2 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 45f7aac..f8cb414 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -100,6 +100,10 @@ config BCM47XX
select SSB_EMBEDDED
select SSB_B43_PCI_BRIDGE if PCI
select SSB_PCICORE_HOSTMODE if PCI
+ select BCMA
+ select BCMA_HOST_SOC
+ select BCMA_DRIVER_MIPS
+ select BCMA_DRIVER_PCI_HOSTMODE
select GENERIC_GPIO
select SYS_HAS_EARLY_PRINTK
select CFE
diff --git a/arch/mips/bcm47xx/gpio.c b/arch/mips/bcm47xx/gpio.c
index 2f6d2df..42af3f8 100644
--- a/arch/mips/bcm47xx/gpio.c
+++ b/arch/mips/bcm47xx/gpio.c
@@ -34,6 +34,9 @@ int gpio_request(unsigned gpio, const char *tag)
return -EBUSY;
return 0;
+ case BCM47XX_BUS_TYPE_BCMA:
+ /* Not implemenmted yet */
+ return -EINVAL;
}
return -EINVAL;
}
@@ -53,6 +56,9 @@ void gpio_free(unsigned gpio)
clear_bit(gpio, gpio_in_use);
return;
+ case BCM47XX_BUS_TYPE_BCMA:
+ /* Not implemenmted yet */
+ return;
}
}
EXPORT_SYMBOL(gpio_free);
@@ -67,6 +73,9 @@ int gpio_to_irq(unsigned gpio)
return ssb_mips_irq(bcm47xx_bus.ssb.extif.dev) + 2;
else
return -EINVAL;
+ case BCM47XX_BUS_TYPE_BCMA:
+ /* Not implemenmted yet */
+ return -EINVAL;
}
return -EINVAL;
}
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
index d2304d0..541facf 100644
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -27,6 +27,7 @@ static char nvram_buf[NVRAM_SPACE];
static void early_nvram_init(void)
{
struct ssb_mipscore *mcore_ssb;
+ struct bcma_drv_mips *mcore_bcma;
struct nvram_header *header;
int i;
u32 base = 0;
@@ -40,6 +41,11 @@ static void early_nvram_init(void)
base = mcore_ssb->flash_window;
lim = mcore_ssb->flash_window_size;
break;
+ case BCM47XX_BUS_TYPE_BCMA:
+ mcore_bcma = &bcm47xx_bus.bcma.bus.drv_mips;
+ base = mcore_bcma->flash_window;
+ lim = mcore_bcma->flash_window_size;
+ break;
}
off = FLASH_MIN;
diff --git a/arch/mips/bcm47xx/serial.c b/arch/mips/bcm47xx/serial.c
index 87c2c5e..03ce8ce 100644
--- a/arch/mips/bcm47xx/serial.c
+++ b/arch/mips/bcm47xx/serial.c
@@ -45,11 +45,36 @@ static int __init uart8250_init_ssb(void)
return platform_device_register(&uart8250_device);
}
+static int __init uart8250_init_bcma(void)
+{
+ int i;
+ struct bcma_drv_mips *mcore = &(bcm47xx_bus.bcma.bus.drv_mips);
+
+ memset(&uart8250_data, 0, sizeof(uart8250_data));
+
+ for (i = 0; i < mcore->nr_serial_ports; i++) {
+ struct plat_serial8250_port *p = &(uart8250_data[i]);
+ struct bcma_drv_mips_serial_port *bcma_port;
+ bcma_port = &(mcore->serial_ports[i]);
+
+ p->mapbase = (unsigned int) bcma_port->regs;
+ p->membase = (void *) bcma_port->regs;
+ p->irq = bcma_port->irq + 2;
+ p->uartclk = bcma_port->baud_base;
+ p->regshift = bcma_port->reg_shift;
+ p->iotype = UPIO_MEM;
+ p->flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+ }
+ return platform_device_register(&uart8250_device);
+}
+
static int __init uart8250_init(void)
{
switch (bcm47xx_active_bus_type) {
case BCM47XX_BUS_TYPE_SSB:
return uart8250_init_ssb();
+ case BCM47XX_BUS_TYPE_BCMA:
+ return uart8250_init_bcma();
}
return -EINVAL;
}
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index c64b76d..d844278 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -29,6 +29,7 @@
#include <linux/types.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
+#include <linux/bcma/bcma_soc.h>
#include <asm/bootinfo.h>
#include <asm/reboot.h>
#include <asm/time.h>
@@ -49,6 +50,9 @@ static void bcm47xx_machine_restart(char *command)
case BCM47XX_BUS_TYPE_SSB:
ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
break;
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1);
+ break;
}
while (1)
cpu_relax();
@@ -62,6 +66,9 @@ static void bcm47xx_machine_halt(void)
case BCM47XX_BUS_TYPE_SSB:
ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
break;
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
+ break;
}
while (1)
cpu_relax();
@@ -288,14 +295,44 @@ static void __init bcm47xx_register_ssb(void)
}
}
+static void __init bcm47xx_register_bcma(void)
+{
+ int err;
+
+ err = bcma_host_soc_register(&bcm47xx_bus.bcma);
+ if (err)
+ panic("Failed to initialize BCMA bus (err %d)\n", err);
+}
+
void __init plat_mem_setup(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
- bcm47xx_active_bus_type = BCM47XX_BUS_TYPE_SSB;
- bcm47xx_register_ssb();
+ if (c->cputype == CPU_74K) {
+ printk(KERN_INFO "bcm47xx: using bcma bus\n");
+ bcm47xx_active_bus_type = BCM47XX_BUS_TYPE_BCMA;
+ bcm47xx_register_bcma();
+ } else {
+ printk(KERN_INFO "bcm47xx: using ssb bus\n");
+ bcm47xx_active_bus_type = BCM47XX_BUS_TYPE_SSB;
+ bcm47xx_register_ssb();
+ }
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
}
+
+static int __init bcm47xx_register_bus_complete(void)
+{
+ switch (bcm47xx_active_bus_type) {
+ case BCM47XX_BUS_TYPE_SSB:
+ /* Nothing to do */
+ break;
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_bus_register(&bcm47xx_bus.bcma.bus);
+ break;
+ }
+ return 0;
+}
+device_initcall(bcm47xx_register_bus_complete);
diff --git a/arch/mips/bcm47xx/time.c b/arch/mips/bcm47xx/time.c
index a7be993..ebb2b64 100644
--- a/arch/mips/bcm47xx/time.c
+++ b/arch/mips/bcm47xx/time.c
@@ -43,6 +43,9 @@ void __init plat_time_init(void)
case BCM47XX_BUS_TYPE_SSB:
hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
break;
+ case BCM47XX_BUS_TYPE_BCMA:
+ hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2;
+ break;
}
if (!hz)
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
index 4be8b95..4771b6f 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -20,13 +20,17 @@
#define __ASM_BCM47XX_H
#include <linux/ssb/ssb.h>
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_soc.h>
enum bcm47xx_bus_type {
BCM47XX_BUS_TYPE_SSB,
+ BCM47XX_BUS_TYPE_BCMA,
};
union bcm47xx_bus {
struct ssb_bus ssb;
+ struct bcma_soc bcma;
};
extern union bcm47xx_bus bcm47xx_bus;
diff --git a/arch/mips/include/asm/mach-bcm47xx/gpio.h b/arch/mips/include/asm/mach-bcm47xx/gpio.h
index 976b8aa..2c80ed5 100644
--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
+++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
@@ -24,6 +24,9 @@ static inline int gpio_get_value(unsigned gpio)
switch (bcm47xx_active_bus_type) {
case BCM47XX_BUS_TYPE_SSB:
return ssb_gpio_in(&bcm47xx_bus.ssb, 1 << gpio);
+ case BCM47XX_BUS_TYPE_BCMA:
+ /* Not implemenmted yet */
+ return -EINVAL;
}
return -EINVAL;
}
@@ -34,6 +37,9 @@ static inline void gpio_set_value(unsigned gpio, int value)
case BCM47XX_BUS_TYPE_SSB:
ssb_gpio_out(&bcm47xx_bus.ssb, 1 << gpio,
value ? 1 << gpio : 0);
+ case BCM47XX_BUS_TYPE_BCMA:
+ /* Not implemenmted yet */
+ return;
}
}
@@ -43,6 +49,9 @@ static inline int gpio_direction_input(unsigned gpio)
case BCM47XX_BUS_TYPE_SSB:
ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 0);
return 0;
+ case BCM47XX_BUS_TYPE_BCMA:
+ /* Not implemenmted yet */
+ return -EINVAL;
}
return -EINVAL;
}
@@ -57,6 +66,9 @@ static inline int gpio_direction_output(unsigned gpio, int value)
/* then set the gpio mode */
ssb_gpio_outen(&bcm47xx_bus.ssb, 1 << gpio, 1 << gpio);
return 0;
+ case BCM47XX_BUS_TYPE_BCMA:
+ /* Not implemenmted yet */
+ return -EINVAL;
}
return -EINVAL;
}
@@ -68,6 +80,9 @@ static inline int gpio_intmask(unsigned gpio, int value)
ssb_gpio_intmask(&bcm47xx_bus.ssb, 1 << gpio,
value ? 1 << gpio : 0);
return 0;
+ case BCM47XX_BUS_TYPE_BCMA:
+ /* Not implemenmted yet */
+ return -EINVAL;
}
return -EINVAL;
}
@@ -79,6 +94,9 @@ static inline int gpio_polarity(unsigned gpio, int value)
ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << gpio,
value ? 1 << gpio : 0);
return 0;
+ case BCM47XX_BUS_TYPE_BCMA:
+ /* Not implemenmted yet */
+ return -EINVAL;
}
return -EINVAL;
}
diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c
index 7e4e063..e570667 100644
--- a/drivers/watchdog/bcm47xx_wdt.c
+++ b/drivers/watchdog/bcm47xx_wdt.c
@@ -58,6 +58,10 @@ static inline void bcm47xx_wdt_hw_start(void)
case BCM47XX_BUS_TYPE_SSB:
ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
break;
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc,
+ 0xfffffff);
+ break;
}
}
@@ -66,6 +70,9 @@ static inline int bcm47xx_wdt_hw_stop(void)
switch (bcm47xx_active_bus_type) {
case BCM47XX_BUS_TYPE_SSB:
return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
+ case BCM47XX_BUS_TYPE_BCMA:
+ bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
+ return 0;
}
return -EINVAL;
}
--
1.7.4.1
More information about the b43-dev
mailing list