[PATCH] bcma: detect PCI core working in hostmode
Hauke Mehrtens
hauke at hauke-m.de
Wed Jul 6 15:01:57 EDT 2011
On 07/05/2011 07:48 PM, Rafał Miłecki wrote:
> We must not init it like clientmode one, it would break device (tested
> by Hauke on BCM4718). Add stub hostmode driver for now.
>
> Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
> ---
> Hauke: will you add your Signed-off-by?
>
> In comparison to your patch for seriee, I have:
> 1) Disabled MIPS check for now (commented in code)
> 2) Enabled mode check even for driver without hostmode enabled
> ---
> drivers/bcma/Kconfig | 6 ++++++
> drivers/bcma/Makefile | 1 +
> drivers/bcma/bcma_private.h | 4 ++++
> drivers/bcma/driver_pci.c | 38 +++++++++++++++++++++++++++++++++++++-
> drivers/bcma/driver_pci_host.c | 14 ++++++++++++++
> 5 files changed, 62 insertions(+), 1 deletions(-)
> create mode 100644 drivers/bcma/driver_pci_host.c
>
> diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
> index 83e9adf..ae0a02e 100644
> --- a/drivers/bcma/Kconfig
> +++ b/drivers/bcma/Kconfig
> @@ -27,6 +27,12 @@ config BCMA_HOST_PCI
> bool "Support for BCMA on PCI-host bus"
> depends on BCMA_HOST_PCI_POSSIBLE
>
> +config BCMA_DRIVER_PCI_HOSTMODE
> + bool "Driver for PCI core working in hostmode"
> + depends on BCMA && MIPS
> + help
> + PCI core hostmode operation (external PCI bus).
> +
> config BCMA_DEBUG
> bool "BCMA debugging"
> depends on BCMA
> diff --git a/drivers/bcma/Makefile b/drivers/bcma/Makefile
> index cde0182..a2161cc 100644
> --- a/drivers/bcma/Makefile
> +++ b/drivers/bcma/Makefile
> @@ -1,6 +1,7 @@
> bcma-y += main.o scan.o core.o sprom.o
> bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
> bcma-y += driver_pci.o
> +bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
> bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
> obj-$(CONFIG_BCMA) += bcma.o
>
> diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
> index 4228736..e02ff21 100644
> --- a/drivers/bcma/bcma_private.h
> +++ b/drivers/bcma/bcma_private.h
> @@ -28,4 +28,8 @@ extern int __init bcma_host_pci_init(void);
> extern void __exit bcma_host_pci_exit(void);
> #endif /* CONFIG_BCMA_HOST_PCI */
>
> +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
> +void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
> +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
> +
> #endif
> diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
> index b0c19ed..dc6f34a 100644
> --- a/drivers/bcma/driver_pci.c
> +++ b/drivers/bcma/driver_pci.c
> @@ -157,11 +157,47 @@ static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc)
> * Init.
> **************************************************/
>
> -void bcma_core_pci_init(struct bcma_drv_pci *pc)
> +static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc)
> {
> bcma_pcicore_serdes_workaround(pc);
> }
>
> +static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
> +{
> + struct bcma_bus *bus = pc->core->bus;
> + u16 chipid_top;
> +
> + chipid_top = (bus->chipinfo.id & 0xFF00);
> + if (chipid_top != 0x4700 &&
> + chipid_top != 0x5300)
> + return false;
> +
> + if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI)
> + return false;
> +
> +#if 0
> + /* TODO: on BCMA we use address from EROM instead of magic formula */
> + u32 tmp;
> + return !mips_busprobe32(tmp, (bus->mmio +
> + (pc->core->core_index * BCMA_CORE_SIZE)));
> +#endif
> +
> + return true;
> +}
> +
> +void bcma_core_pci_init(struct bcma_drv_pci *pc)
> +{
> + if (bcma_core_pci_is_in_hostmode(pc)) {
> +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
> + bcma_core_pci_hostmode_init(pc);
> +#else
> + pr_err("Driver compiled without support for hostmode PCI\n");
> +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
> + } else {
> + bcma_core_pci_clientmode_init(pc);
> + }
> +}
> +
> int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
> bool enable)
> {
> diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c
> new file mode 100644
> index 0000000..eb332b7
> --- /dev/null
> +++ b/drivers/bcma/driver_pci_host.c
> @@ -0,0 +1,14 @@
> +/*
> + * Broadcom specific AMBA
> + * PCI Core in hostmode
> + *
> + * Licensed under the GNU/GPL. See COPYING for details.
> + */
> +
> +#include "bcma_private.h"
> +#include <linux/bcma/bcma.h>
> +
> +void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
> +{
> + pr_err("No support for PCI core in hostmode yet\n");
> +}
More information about the b43-dev
mailing list