Trouble using bcm4318 compact flash with b43 driver

[dylan cristiani]

On Sat, 22 Jan 2011 11:48:34 +0100
Dylan Cristiani <d.cristiani at idem-tech.it> wrote:

[snip]
> > 
> > If you don't have any version that always works, then bisection is
> > likely not the answer. You will need to investigate what is on the
> > air by using kismet or wireshark on a separate computer.
> i'll try with kismet or wireshark (keeping my finger crossed....,but
> the fact that problems are intermittent make me feel bad....)
> > 
> > Larry
> tks again Larry!!
> 
i have some news: i went back to kernel version 2.6.26 and it worked
so i moved forward kernel by kernel and it works till kernel 2.6.32;
first kernel that shows up the problem is 2.6.33 and, at module loading
time i can see for the first time, after loading firmware, the following
debug info (don't know if it's helpful but same message happears in
every non-working kernel from 2.6.33 to 2.6.37):

"b43-phy0 warning: Invalid max-TX-power value in SPROM"

dylan