low throughputs with 14e4:4353

[francesco.gringoli at ing.unibs.it]

On Dec 8, 2011, at 10:34 AM, Rafał Miłecki wrote:

> W dniu 8 grudnia 2011 10:21 użytkownik
> <francesco.gringoli at ing.unibs.it> napisał:
>> 
>> On Dec 7, 2011, at 1:01 PM, Rafał Miłecki wrote:
>> 
>>> W dniu 5 grudnia 2011 21:39 użytkownik Rafał Miłecki <zajec5 at gmail.com> napisał:
>>>> W dniu 29 listopada 2011 22:36 użytkownik Rafał Miłecki
>>>> <zajec5 at gmail.com> napisał:
>>>>> I'll give it a rest and will try in next days again.
>>>> 
>>>> It really seems it's something spur avoidance related (and so most
>>>> probably CC PLL related). After applying my patch implementing SPUR
>>>> avoidance, card stops receiving anything. I'll dig more around it.
>>> 
>>> I've found bug in my implementation and fixed it. Today evening I'll
>>> test if my patch fixes performance anyhow (I need physical access).
>> Rafal,
>> 
>> I did some mmio traces and checked what happens when changing txpower.
>> 
>> 1) values in N-PHY tables 0x1A and 0x1B are changed, e.g., for txpower 5 and txpower 10 they are the same, for txpower 15 they are different so I guess there exist thresholds. Unfortunately I don't even know what these tables are.
>> 
>> 2) value in PHY register 0x1ea is changed according to the configured power value. As I can read in specs this is the TX power control target power for both radios: e.g., for txpower 5 => 0x2020, for txpower 10 => 0x2c2c, for txpower 15 => 0x3c3c.
>> 
>> Then I switched to b43 and load a custom firmware to analyze how register 0x1ea is setup and it holds always 0x0000. I forced it to be 0x2c2c and magically the throughput increased to ~ 3Mb/s. Unfortunately when I try 0x3c3c (corresponding to txpower 15) I get only phy-transmission errors.
> 
> I can see a lot of differences between wl and b43, a lot to validate&test.
> 
> Do you have some magic scripts for parsing MMIO dumps? I hope you do,
> otherwise it's impossible to analyze that ;)
> 
> You can try adding
> nphy->txpwrctrl = true;
> in function b43_nphy_op_prepare_structs if you wish test something
> right now. I've noticed this missing part today morning, but won't
> able to test until evening.
> 
Hi Rafal,

great! I applied all the last patches you sent and the throughput now grows during an iperf experiment.

Unfortunately, if to a given AP I can get up to 17-18Mb/s from a 4318, my 43224 never exceeds 5Mb/s :-(

Are you experiencing something similar?

Many thanks,
-Francesco