[PATCH] b43: Mask out unwanted bits of RX slot address

[Rafał Miłecki]

W dniu 14 sierpnia 2011 13:17 użytkownik Rafał Miłecki
<zajec5 at gmail.com> napisał:
> W dniu 14 sierpnia 2011 11:24 użytkownik Rafał Miłecki
> <zajec5 at gmail.com> napisał:
>> W dniu 14 sierpnia 2011 11:07 użytkownik Rafał Miłecki
>> <zajec5 at gmail.com> napisał:
>>> I guess we should just increase RX ring size instead hacking
>>> (stripping) 0x1000 bit. We just need to check  on which hardware wl
>>> uses 256 ring size.
>>
>> Ignore that. I just got 8 KiB aligned ring when testing 256 ring size.
>>
>> I agree with David, that 0x1000 comes from ring address. Depending on
>> address alignment it's 0 or 1.
>
> I wanted to check if firmware ever uses 0x1000 for addressing
> purposes. To test that I've increased RX ring size to 257 and waited
> for 8 KiB aligned ring address (to avoid copying 0x1000 bit from
> address).
>
> [ 3963.448699] RX ring at 24661e000
> (...)
> [ 4041.766608] Read RXSTATUS 0x10000fc0 (makes offs 0xfc0, divided by
> 0x10 gives slot 0xfc
> [ 4042.066683] Read RXSTATUS 0x10000fd0 (makes offs 0xfd0, divided by
> 0x10 gives slot 0xfd
> [ 4042.070585] Read RXSTATUS 0x10000fe0 (makes offs 0xfe0, divided by
> 0x10 gives slot 0xfe
> [ 4042.141030] Read RXSTATUS 0x10000ff0 (makes offs 0xff0, divided by
> 0x10 gives slot 0xff
> [ 4042.206599] b43-phy0 ERROR: Fatal DMA error: 0x00011000,
> 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
> [ 4042.208438] b43-phy0 ERROR: This device does not support DMA on
> your system. It will now be switched to PIO.
> [ 4042.210463] b43-phy0: Controller RESET (DMA error) ...
>
> Maybe we should just change:
> #define         B43_DMA64_TXSTATDPTR            0x00001FFF

I meant
#define		B43_DMA64_RXSTATDPTR		0x00001FFF
ofc

-- 
Rafał