[RFC][PATCH V4] axi: add AXI bus driver
jonas.gorski at gmail.com
Wed Apr 13 19:36:27 EDT 2011
On 13 April 2011 23:19, Rafał Miłecki <zajec5 at gmail.com> wrote:
> 2011/4/13 George Kashperko <george at znau.edu.ua>:
>>> I had no idea what you were referring to. We do not dig into PCIe
>>> functions yet, so I believe for now we need this "if".
>> You are already deep inside. Your host code drives pci function.
> But I don't use multiple PCIe functions, do not focus on that at all.
I think what George meant is the following (please correct me if I
understood you wrong) and has nothing to do with PCIe functions:
The chipcommon and PCIe core registers seem to be always available on
PCIe and no core switching is necessary for them. So as long as you
only access the core registers of chipcommon, PCIe + one other core,
you never need to do any switching (except for the initial switch to
the other core)
But If you need to access the agent registers you do have to do adapt
the PCIe windows.
(This seems to apply also to PCI cards with a PCI core revision >= 13,
but this is probably only relevant for SSB - unless Arend says there
are/were also PCI cards with AMBA AXI backplanes ;-).
More information about the b43-dev