[RFC][PATCH V3] axi: add AXI bus driver
zajec5 at gmail.com
Mon Apr 11 18:45:33 EDT 2011
2011/4/12 Greg KH <greg at kroah.com>:
> On Tue, Apr 12, 2011 at 12:12:47AM +0200, Rafał Miłecki wrote:
>> 2011/4/11 Greg KH <greg at kroah.com>:
>> > On Mon, Apr 11, 2011 at 11:36:39PM +0200, Rafał Miłecki wrote:
>> >> 2011/4/11 Greg KH <greg at kroah.com>:
>> >> > Please read the documentation for how to do this properly. I find it
>> >> > really hard to believe that you wrote that comment instead of putting in
>> >> > the 2 lines of code required for this function.
>> >> >
>> >> > Especially as-it-is, your code does not work properly and leaks memory
>> >> > badly. Why would you do that on purpose?
>> >> I tried to read some documentation about this.
>> >> 1) driver-mode/device.txt says only that:
>> >> > Callback to free the device after all references have
>> >> > gone away. This should be set by the allocator of the
>> >> > device (i.e. the bus driver that discovered the device).
>> >> I *really* do not know how my driver should "free" core on AXI bus.
>> > The structure that you have created, added to the bus, is now ready to
>> > have its memory freed. So free it.
>> > This usually means something like:
>> > struct my_obj = to_my_obj(dev);
>> > kfree(my_obj);
>> > in the release function.
>> I register core->dev to the bus (I set core->dev.bus and
>> core->dev.parent, is that what you mean?). This core->dev is "struct
>> dev" embedded in "struct axi_device". By embedded I mean it is *not* a
>> pointer, I do not alloc it, it's part of the "struct axi_device".
> That is exactly as it should be.
> Then in your release function, free the struct axi_device. It's that
> simple. To try to free it before then would be wrong and cause
This is because it is defined as:
struct axi_device cores[AXI_MAX_NR_CORES];
>> >> 4) SSB in it's ssb_release_dev just calls kfree on struct that was
>> >> allocated when registering drivers. *I do not* allocate such a struct,
>> >> so I believe I do exactly the same memory leak as SSB does.
>> > Well someone allocated it, right? Who did it? If it wasn't you, where
>> > did that structure come from and why are you registering it on your bus?
>> >> Can you spend 2 more minues in addition to commenting my ideas and
>> >> help me with writing that 2 lines I missed? Where do I leak memory in
>> >> my driver? Which struct should I kfree?
>> > The structure that you wrap around 'struct device' for your bus.
>> As explained above, this I do not dynamically alloc this 'struct
>> device'. So is there really any memory leak?
> Yes, no one ever freed your struct axi_device that you created.
I agree that defining "cores" as array with maxium possible size
instead of linked list eats more memory than needed, but at least it
does not leak anything.
More information about the b43-dev