BCM4321 - These devices have unsupported N-PHYs. We are working on it.

[Ariel Pedraza]

where can I get the firmware for brcm80211?
Is there a FOSSI firmware or is the one provided by Broadcom the only one?

I installed from the  compat-wireless-2.6.tar.bz2 but ask for the firmware...

--- El vie, 10/1/10, Gábor Stefanik <netrolller.3d at gmail.com> escribió:

> De: Gábor Stefanik <netrolller.3d at gmail.com>
> Asunto: Re: BCM4321 - These devices have unsupported N-PHYs. We are working on it.
> A: "Ariel Pedraza" <pedrazaa at yahoo.com>, "b43-dev" <b43-dev at lists.infradead.org>
> Fecha: viernes, 1 de octubre de 2010, 04:48 pm
> P.S. Remember to use Reply to All
> when replying to a list.
> 
> 2010/10/1 Gábor Stefanik <netrolller.3d at gmail.com>:
> > 2010/10/1 Ariel Pedraza <pedrazaa at yahoo.com>:
> >> Do I have to bind to the b43 instead the wl? using
> this procedure "Manual driver binding and unbinding" (http://lwn.net/Articles/143397/)...
> >
> > You actually need to bind it to ssb, the back-end
> module for b43.
> > also, blacklist wl while testing. (However, I would
> say it's easier to
> > add the PCI ID of your card to ssb directly rather
> than using the
> > bind/unbind files.)
> >
> >>
> >> --- El vie, 10/1/10, Gábor Stefanik <netrolller.3d at gmail.com>
> escribió:
> >>
> >>> De: Gábor Stefanik <netrolller.3d at gmail.com>
> >>> Asunto: Re: BCM4321 - These devices have
> unsupported N-PHYs. We are working on it.
> >>> A: "Ariel Pedraza" <pedrazaa at yahoo.com>
> >>> Cc: b43-dev at lists.infradead.org
> >>> Fecha: viernes, 1 de octubre de 2010, 05:53
> am
> >>> On Thu, Sep 30, 2010 at 7:42 PM,
> >>> Ariel Pedraza <pedrazaa at yahoo.com>
> >>> wrote:
> >>> > Hi, how far are you to support this chip
> BCM4321?
> >>>
> >>> I've asked this question earlier; all code for
> BCM4321
> >>> seems to be in
> >>> place (though not for BCM4322), but it is
> still disabled as
> >>> BROKEN.
> >>>
> >>> >
> >>> > Is this a new chip BCM4727 not listed on
> your page (http://linuxwireless.org/en/users/Drivers/b43)?
> >>> >
> >>> > dmesg | grep eth1
> >>> > eth1: Broadcom BCM4727 802.11 Hybrid
> Wireless
> >>> Controller 5.60.48.36
> >>>
> >>> This is BCM4313, supported in brcm80211.
> wl_hybrid
> >>> incorrectly uses
> >>> the PCI device ID (0x4727) rather than the SSB
> chip ID
> >>> (decimal(?)
> >>> 4313) to identify the card.
> >>>
> >>> >
> >>> >
> >>> >
> >>> >
> >>> >
> >>> >
> _______________________________________________
> >>> > b43-dev mailing list
> >>> > b43-dev at lists.infradead.org
> >>> > http://lists.infradead.org/mailman/listinfo/b43-dev
> >>> >
> >>>
> >>>
> >>>
> >>> --
> >>> Vista: [V]iruses, [I]ntruders, [S]pyware,
> [T]rojans and
> >>> [A]dware. :-)
> >>>
> >>
> >>
> >>
> >>
> >
> >
> >
> > --
> > Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans
> and [A]dware. :-)
> >
> 
> 
> 
> -- 
> Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and
> [A]dware. :-)
>