Issues with 14e4:4315 on "lenovo ideapad s9" - works only after wl
Paul Fertser
fercerpav at gmail.com
Sat Oct 9 17:32:20 EDT 2010
On Sat, Oct 09, 2010 at 10:37:04PM +0200, Gábor Stefanik wrote:
> On Sat, Oct 9, 2010 at 8:36 PM, Paul Fertser <fercerpav at gmail.com> wrote:
> > On Sat, Oct 09, 2010 at 03:53:20PM +0400, Paul Fertser wrote:
> >> The card works as expected with the sta driver, and b43 handles it nicely
> >> after unloading wl and loading b43
> >
> > I'd expect lack of txpower adjustment for LP might very well be the cause for
> > this. The specs seem to be ready so probably implementing this part would not
> > be too hard.
> >
> > In case it might be of interest, ssb sprom contents attached.
>
> Please run: dmesg | grep -i "fatal dma error"
> Chances are that you are seeing the PhoenixBIOS LP-PHY DMA bug.
> (Lenovo S10 is known for showing the same bug.)
Indeed there's a fatal dma error there in the non-working case (and switching
to PIO doesn't help). But it doesn't happen after wl. Both dmesgs attached.
--
Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
mailto:fercerpav at gmail.com
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-25-generic (buildd at rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 (Ubuntu 2.6.32-25.44-generic 2.6.32.21+drm33.7)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6d0000 - 000000003f6e2000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6e2000 - 000000003f6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6e3000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0x3f6d0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f6d0000 (usable)
[ 0.000000] modified: 000000003f6d0000 - 000000003f6e2000 (ACPI data)
[ 0.000000] modified: 000000003f6e2000 - 000000003f6e3000 (ACPI NVS)
[ 0.000000] modified: 000000003f6e3000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 8e1000-9c2000
[ 0.000000] RAMDISK: 2eccd000 - 2f95bcb6
[ 0.000000] ACPI: RSDP 000f7a50 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 3f6d9f76 00084 (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 3f6e1bd7 000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 3f6db178 069EB (v01 INTEL CALISTGA 06040000 INTL 20061109)
[ 0.000000] ACPI: FACS 3f6e2fc0 00040
[ 0.000000] ACPI: HPET 3f6e1ccb 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 3f6e1d03 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA 3f6e1d3f 00032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
[ 0.000000] ACPI: TMOR 3f6e1d71 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC 3f6e1d97 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 3f6e1dff 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 3f6e1e27 00176 (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: ASF! 3f6e1f9d 00063 (v16 CETP CETP 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 3f6da596 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f6da4f0 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f6d9ffa 004F6 (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00007000 - 0000df00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==> [0000100000 - 00008dced8]
[ 0.000000] #4 [002eccd000 - 002f95bcb6] RAMDISK ==> [002eccd000 - 002f95bcb6]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [00008dd000 - 00008e0210] BRK ==> [00008dd000 - 00008e0210]
[ 0.000000] #7 [00008e1000 - 00009bc000] PGTABLE ==> [00008e1000 - 00009bc000]
[ 0.000000] #8 [0000007000 - 000000e000] BOOTMAP ==> [0000007000 - 000000e000]
[ 0.000000] found SMP MP-table at [c00f7b60] f7b60
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f6d0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f6d0
[ 0.000000] On node 0 totalpages: 259691
[ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c1001000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32212 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c17f7000 s36056 r0 d21288 u65536
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257661
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=565e7bee-9137-4bf0-970a-b9c42bdb4880 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5195840 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f6d0)
[ 0.000000] Memory: 1002396k/1039168k available (4680k kernel code, 35960k reserved, 2122k data, 656k init, 129864k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB)
[ 0.000000] .data : 0xc05922c7 - 0xc07a4e68 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05922c7 (4680 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1595.938 MHz processor.
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.87 BogoMIPS (lpj=6383752)
[ 0.004049] Security Framework initialized
[ 0.004093] AppArmor: AppArmor initialized
[ 0.004110] Mount-cache hash table entries: 512
[ 0.004355] Initializing cgroup subsys ns
[ 0.004365] Initializing cgroup subsys cpuacct
[ 0.004375] Initializing cgroup subsys memory
[ 0.004391] Initializing cgroup subsys devices
[ 0.004398] Initializing cgroup subsys freezer
[ 0.004403] Initializing cgroup subsys net_cls
[ 0.004438] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.004448] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004455] CPU: L2 cache: 512K
[ 0.004460] CPU: Physical Processor ID: 0
[ 0.004465] CPU: Processor Core ID: 0
[ 0.008015] mce: CPU supports 5 MCE banks
[ 0.008032] CPU0: Thermal monitoring handled by SMI
[ 0.008040] using mwait in idle threads.
[ 0.008052] Performance Events: Atom events, Intel PMU driver.
[ 0.008070] ... version: 3
[ 0.008075] ... bit width: 40
[ 0.008080] ... generic registers: 2
[ 0.008084] ... value mask: 000000ffffffffff
[ 0.008090] ... max period: 000000007fffffff
[ 0.008095] ... fixed-purpose events: 3
[ 0.008099] ... event mask: 0000000700000003
[ 0.008108] Checking 'hlt' instruction... OK.
[ 0.024016] Disabling 4MB page tables to avoid TLB bug
[ 0.028503] ACPI: Core revision 20090903
[ 0.048018] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.048030] ftrace: allocating 21789 entries in 43 pages
[ 0.052110] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.052517] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.093198] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.096001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.180068] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.180099] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.184036] Brought up 2 CPUs
[ 0.184044] Total of 2 processors activated (6383.80 BogoMIPS).
[ 0.184294] CPU0 attaching sched-domain:
[ 0.184303] domain 0: span 0-1 level SIBLING
[ 0.184309] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.184322] domain 1: span 0-1 level MC
[ 0.184327] groups: 0-1 (cpu_power = 1178)
[ 0.184341] CPU1 attaching sched-domain:
[ 0.184346] domain 0: span 0-1 level SIBLING
[ 0.184351] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.184362] domain 1: span 0-1 level MC
[ 0.184367] groups: 0-1 (cpu_power = 1178)
[ 0.184599] devtmpfs: initialized
[ 0.184599] regulator: core version 0.5
[ 0.184599] Time: 1:10:30 Date: 10/10/10
[ 0.184599] NET: Registered protocol family 16
[ 0.184599] Trying to unpack rootfs image as initramfs...
[ 0.184599] EISA bus registered
[ 0.184608] ACPI: bus type pci registered
[ 0.184788] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.184798] PCI: MCFG area at e0000000 reserved in E820
[ 0.184804] PCI: Using MMCONFIG for extended config space
[ 0.184811] PCI: Using configuration type 1 for base access
[ 0.189846] bio: create slab <bio-0> at 0
[ 0.192324] ACPI: EC: Look up EC in DSDT
[ 0.202486] ACPI: BIOS _OSI(Linux) query ignored
[ 0.208292] ACPI: Interpreter enabled
[ 0.208311] ACPI: (supports S0 S3 S4 S5)
[ 0.208391] ACPI: Using IOAPIC for interrupt routing
[ 0.227573] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.228315] ACPI: No dock devices found.
[ 0.229854] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.230060] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0500000-0xf057ffff]
[ 0.230073] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[ 0.230086] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.230099] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0600000-0xf063ffff]
[ 0.230167] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0580000-0xf05fffff]
[ 0.230344] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0640000-0xf0643fff]
[ 0.230431] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.230443] pci 0000:00:1b.0: PME# disabled
[ 0.230575] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.230586] pci 0000:00:1c.0: PME# disabled
[ 0.230721] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.230732] pci 0000:00:1c.1: PME# disabled
[ 0.230867] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.230878] pci 0000:00:1c.2: PME# disabled
[ 0.230978] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.231083] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.231181] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.231277] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.231380] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0844000-0xf08443ff]
[ 0.231469] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.231480] pci 0000:00:1d.7: PME# disabled
[ 0.231711] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.231722] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.231737] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
[ 0.231818] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.231837] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.231852] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.231868] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.231883] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.231970] pci 0000:00:1f.2: reg 10 io port: [0x18c8-0x18cf]
[ 0.232018] pci 0000:00:1f.2: reg 14 io port: [0x18c0-0x18c3]
[ 0.232035] pci 0000:00:1f.2: reg 18 io port: [0x18a8-0x18af]
[ 0.232050] pci 0000:00:1f.2: reg 1c io port: [0x180c-0x180f]
[ 0.232065] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[ 0.232081] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0844400-0xf08447ff]
[ 0.232129] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.232140] pci 0000:00:1f.2: PME# disabled
[ 0.232225] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[ 0.232522] pci 0000:02:00.0: reg 10 64bit mmio: [0xf0200000-0xf020ffff]
[ 0.232796] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.232815] pci 0000:02:00.0: PME# disabled
[ 0.232946] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.232958] pci 0000:00:1c.0: bridge 32bit mmio: [0xf0200000-0xf02fffff]
[ 0.232974] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf00fffff]
[ 0.233064] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[ 0.233075] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0300000-0xf03fffff]
[ 0.233091] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf0100000-0xf01fffff]
[ 0.233484] pci 0000:05:00.0: reg 10 64bit mmio: [0xf0400000-0xf0403fff]
[ 0.233726] pci 0000:05:00.0: supports D1 D2
[ 0.233734] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.233749] pci 0000:05:00.0: PME# disabled
[ 0.233915] pci 0000:00:1c.2: bridge 32bit mmio: [0xf0400000-0xf04fffff]
[ 0.234010] pci 0000:00:1e.0: transparent bridge
[ 0.234064] pci_bus 0000:00: on NUMA node 0
[ 0.234086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.234718] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.234961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.235194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.235483] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.256397] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.256675] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
[ 0.256947] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.257232] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.257507] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.257781] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.258053] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.258334] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.258655] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.258689] vgaarb: loaded
[ 0.259103] SCSI subsystem initialized
[ 0.259345] libata version 3.00 loaded.
[ 0.259581] usbcore: registered new interface driver usbfs
[ 0.259628] usbcore: registered new interface driver hub
[ 0.259716] usbcore: registered new device driver usb
[ 0.260357] ACPI: WMI: Mapper loaded
[ 0.260365] PCI: Using ACPI for IRQ routing
[ 0.261251] NetLabel: Initializing
[ 0.261259] NetLabel: domain hash size = 128
[ 0.261264] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.261297] NetLabel: unlabeled traffic allowed by default
[ 0.261413] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.261429] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.264132] Switching to clocksource tsc
[ 0.269013] AppArmor: AppArmor Filesystem Enabled
[ 0.269060] pnp: PnP ACPI init
[ 0.269102] ACPI: bus type pnp registered
[ 0.277853] pnp: PnP ACPI: found 10 devices
[ 0.277862] ACPI: ACPI bus type pnp unregistered
[ 0.277873] PnPBIOS: Disabled by ACPI PNP
[ 0.277905] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.277916] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.277926] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.277937] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.277949] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.277959] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.277969] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.277980] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.278005] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.278029] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.278041] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 0.278051] system 00:05: ioport range 0x1180-0x11bf has been reserved
[ 0.278061] system 00:05: ioport range 0x1640-0x164f has been reserved
[ 0.278071] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 0.278081] system 00:05: ioport range 0x380-0x384 has been reserved
[ 0.278091] system 00:05: ioport range 0x386-0x387 has been reserved
[ 0.278110] system 00:06: ioport range 0x6a0-0x6af has been reserved
[ 0.278120] system 00:06: ioport range 0x6b0-0x6ff has been reserved
[ 0.313347] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.313361] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.313375] pci 0000:00:1c.0: MEM window: 0xf0200000-0xf02fffff
[ 0.313388] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f00fffff
[ 0.313404] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.313413] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.313426] pci 0000:00:1c.1: MEM window: 0xf0300000-0xf03fffff
[ 0.313438] pci 0000:00:1c.1: PREFETCH window: 0x000000f0100000-0x000000f01fffff
[ 0.313454] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
[ 0.313464] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.313477] pci 0000:00:1c.2: MEM window: 0xf0400000-0xf04fffff
[ 0.313489] pci 0000:00:1c.2: PREFETCH window: 0x00000040000000-0x000000401fffff
[ 0.313507] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.313514] pci 0000:00:1e.0: IO window: disabled
[ 0.313526] pci 0000:00:1e.0: MEM window: disabled
[ 0.313538] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.313583] alloc irq_desc for 17 on node -1
[ 0.313590] alloc kstat_irqs on node -1
[ 0.313610] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.313625] pci 0000:00:1c.0: setting latency timer to 64
[ 0.313649] alloc irq_desc for 16 on node -1
[ 0.313655] alloc kstat_irqs on node -1
[ 0.313667] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.313679] pci 0000:00:1c.1: setting latency timer to 64
[ 0.313700] alloc irq_desc for 18 on node -1
[ 0.313706] alloc kstat_irqs on node -1
[ 0.313717] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.313729] pci 0000:00:1c.2: setting latency timer to 64
[ 0.313746] pci 0000:00:1e.0: setting latency timer to 64
[ 0.313759] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.313767] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.313776] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.313785] pci_bus 0000:02: resource 1 mem: [0xf0200000-0xf02fffff]
[ 0.313793] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf00fffff]
[ 0.313802] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
[ 0.313810] pci_bus 0000:03: resource 1 mem: [0xf0300000-0xf03fffff]
[ 0.313819] pci_bus 0000:03: resource 2 pref mem [0xf0100000-0xf01fffff]
[ 0.313828] pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
[ 0.313836] pci_bus 0000:05: resource 1 mem: [0xf0400000-0xf04fffff]
[ 0.313845] pci_bus 0000:05: resource 2 pref mem [0x40000000-0x401fffff]
[ 0.313856] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.313864] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[ 0.313964] NET: Registered protocol family 2
[ 0.314242] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.315226] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.316407] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.316970] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.316984] TCP reno registered
[ 0.317261] NET: Registered protocol family 1
[ 0.317317] pci 0000:00:02.0: Boot video device
[ 0.317572] Simple Boot Flag at 0x36 set to 0x1
[ 0.318085] cpufreq-nforce2: No nForce2 chipset.
[ 0.318184] Scanning for low memory corruption every 60 seconds
[ 0.318560] audit: initializing netlink socket (disabled)
[ 0.318591] type=2000 audit(1286673030.314:1): initialized
[ 0.340257] highmem bounce pool size: 64 pages
[ 0.340273] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.345541] VFS: Disk quotas dquot_6.5.2
[ 0.345732] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.347838] fuse init (API version 7.13)
[ 0.348133] msgmni has been set to 1704
[ 0.348837] alg: No test for stdrng (krng)
[ 0.349032] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.349042] io scheduler noop registered
[ 0.349048] io scheduler anticipatory registered
[ 0.349054] io scheduler deadline registered
[ 0.349191] io scheduler cfq registered (default)
[ 0.349558] alloc irq_desc for 24 on node -1
[ 0.349566] alloc kstat_irqs on node -1
[ 0.349591] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.349611] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.349894] alloc irq_desc for 25 on node -1
[ 0.349901] alloc kstat_irqs on node -1
[ 0.349919] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.349937] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.350218] alloc irq_desc for 26 on node -1
[ 0.350225] alloc kstat_irqs on node -1
[ 0.350247] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.350269] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.350535] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.350827] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.355471] ACPI: AC Adapter [ACAD] (on-line)
[ 0.355746] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.355757] ACPI: Power Button [PWRB]
[ 0.355892] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.355902] ACPI: Sleep Button [SLPB]
[ 0.356048] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.455190] ACPI: Lid Switch [LID]
[ 0.455425] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.455437] ACPI: Power Button [PWRF]
[ 0.457182] ACPI: SSDT 3f6dae5f 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.458469] ACPI: SSDT 3f6da7f5 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.465283] Monitor-Mwait will be used to enter C-1 state
[ 0.465394] Monitor-Mwait will be used to enter C-2 state
[ 0.465488] Monitor-Mwait will be used to enter C-3 state
[ 0.465513] Marking TSC unstable due to TSC halts in idle
[ 0.465701] processor LNXCPU:00: registered as cooling_device0
[ 0.466786] ACPI: SSDT 3f6db0a4 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.467710] ACPI: SSDT 3f6dadda 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.469134] Switching to clocksource hpet
[ 0.477459] processor LNXCPU:01: registered as cooling_device1
[ 0.486897] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.486928] ACPI: Thermal Zone [TZ00] (60 C)
[ 0.492574] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.497577] brd: module loaded
[ 0.499535] loop: module loaded
[ 0.499838] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.500286] isapnp: Scanning for PnP cards...
[ 0.531253] ACPI: Battery Slot [BAT0] (battery present)
[ 0.551821] ata_piix 0000:00:1f.1: version 2.13
[ 0.551869] alloc irq_desc for 19 on node -1
[ 0.551878] alloc kstat_irqs on node -1
[ 0.551899] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.551988] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.595911] scsi0 : ata_piix
[ 0.640001] scsi1 : ata_piix
[ 0.641484] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.641494] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.641593] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.641608] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 0.673146] ata2: port disabled. ignoring.
[ 0.801297] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.825296] scsi2 : ata_piix
[ 0.860505] isapnp: No Plug & Play device found
[ 0.861050] scsi3 : ata_piix
[ 0.861216] ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b0 irq 19
[ 0.861225] ata4: SATA max UDMA/133 cmd 0x18a8 ctl 0x180c bmdma 0x18b8 irq 19
[ 0.862445] Fixed MDIO Bus: probed
[ 0.862573] PPP generic driver version 2.4.2
[ 0.862744] tun: Universal TUN/TAP device driver, 1.6
[ 0.862751] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 0.863021] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.863087] alloc irq_desc for 23 on node -1
[ 0.863094] alloc kstat_irqs on node -1
[ 0.863112] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.863154] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.863165] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.863270] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.863318] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.863341] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.867259] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.867305] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0844000
[ 0.884085] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.884442] usb usb1: configuration #1 chosen from 1 choice
[ 0.884541] hub 1-0:1.0: USB hub found
[ 0.884573] hub 1-0:1.0: 8 ports detected
[ 0.884781] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.884837] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.884933] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.884954] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.884963] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.885100] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.885150] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 0.885450] usb usb2: configuration #1 chosen from 1 choice
[ 0.885538] hub 2-0:1.0: USB hub found
[ 0.885560] hub 2-0:1.0: 2 ports detected
[ 0.885703] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.885722] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.885731] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.885858] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.885904] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 0.886178] usb usb3: configuration #1 chosen from 1 choice
[ 0.886265] hub 3-0:1.0: USB hub found
[ 0.886287] hub 3-0:1.0: 2 ports detected
[ 0.886408] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.886424] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.886433] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.886560] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.886631] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 0.886928] usb usb4: configuration #1 chosen from 1 choice
[ 0.887015] hub 4-0:1.0: USB hub found
[ 0.887037] hub 4-0:1.0: 2 ports detected
[ 0.887172] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.887188] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.887198] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.887304] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.887364] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 0.887670] usb usb5: configuration #1 chosen from 1 choice
[ 0.887761] hub 5-0:1.0: USB hub found
[ 0.887781] hub 5-0:1.0: 2 ports detected
[ 0.888122] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.900868] Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.900880] If AUX port is really absent please use the 'i8042.noaux' option.
[ 0.915371] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.915404] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.915892] mice: PS/2 mouse device common for all mice
[ 0.917190] rtc_cmos 00:07: RTC can wake from S4
[ 0.917340] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.917403] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.917765] device-mapper: uevent: version 1.0.3
[ 0.918145] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
[ 0.918422] device-mapper: multipath: version 1.1.0 loaded
[ 0.918431] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.918829] EISA: Probing bus 0 at eisa.0
[ 0.918845] Cannot allocate resource for EISA slot 1
[ 0.918853] Cannot allocate resource for EISA slot 2
[ 0.918860] Cannot allocate resource for EISA slot 3
[ 0.918867] Cannot allocate resource for EISA slot 4
[ 0.918895] EISA: Detected 0 cards.
[ 0.919413] cpuidle: using governor ladder
[ 0.919782] cpuidle: using governor menu
[ 0.921254] TCP cubic registered
[ 0.921879] NET: Registered protocol family 10
[ 0.923339] lo: Disabled Privacy Extensions
[ 0.924397] NET: Registered protocol family 17
[ 0.925885] Using IPI No-Shortcut mode
[ 0.926206] PM: Resume from disk failed.
[ 0.926241] registered taskstats version 1
[ 0.927383] Magic number: 14:493:154
[ 0.927420] bdi 1:6: hash matches
[ 0.927470] acpi device:21: hash matches
[ 0.927586] rtc_cmos 00:07: setting system clock to 2010-10-10 01:10:31 UTC (1286673031)
[ 0.927597] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.927603] EDD information not available.
[ 0.927716] Freeing initrd memory: 12859k freed
[ 0.936165] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.086649] ata3.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 1.086658] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.101348] ata3.00: configured for UDMA/133
[ 1.101671] scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5
[ 1.101999] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.102063] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.102201] sd 2:0:0:0: [sda] Write Protect is off
[ 1.102211] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.102313] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.102694] sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[ 1.141143] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.141216] Freeing unused kernel memory: 656k freed
[ 1.141774] Write protecting the kernel text: 4684k
[ 1.141859] Write protecting the kernel read-only data: 1840k
[ 1.184863] udev: starting version 151
[ 1.192118] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 1.503842] Linux agpgart interface v0.103
[ 1.512208] tg3.c:v3.102 (September 1, 2009)
[ 1.512296] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.512321] tg3 0000:02:00.0: setting latency timer to 64
[ 1.523062] usb 1-3: configuration #1 chosen from 1 choice
[ 1.535548] acpi device:03: registered as cooling_device2
[ 1.535972] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.536141] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.622202] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.622544] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 1.624519] [drm] Initialized drm 1.1.0 20060810
[ 1.625851] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.668071] usb 1-5: new high speed USB device using ehci_hcd and address 3
[ 1.696142] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.696158] i915 0000:00:02.0: setting latency timer to 64
[ 1.708866] [drm] set up 7M of stolen space
[ 1.811259] usb 1-5: configuration #1 chosen from 1 choice
[ 1.812284] [drm] initialized overlay support
[ 1.838299] Initializing USB Mass Storage driver...
[ 1.838623] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1.839038] usbcore: registered new interface driver usb-storage
[ 1.839047] USB Mass Storage support registered.
[ 1.839981] usb-storage: device found at 3
[ 1.839987] usb-storage: waiting for device to settle before scanning
[ 1.896092] eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:26:9e:70:80:c2
[ 1.896104] eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[ 1.896112] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[ 1.896118] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.194845] fb0: inteldrmfb frame buffer device
[ 2.194853] registered panic notifier
[ 2.194871] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.199729] vga16fb: initializing
[ 2.199740] vga16fb: mapped to 0xc00a0000
[ 2.199750] vga16fb: not registering due to another framebuffer present
[ 2.583283] Console: switching to colour frame buffer device 128x37
[ 3.376823] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 5.955595] Adding 2353480k swap on /dev/sda7. Priority:-1 extents:1 across:2353480k
[ 6.636218] udev: starting version 151
[ 6.856085] usb-storage: device scan complete
[ 6.858246] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 6.859837] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 6.888112] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 7.706181] type=1505 audit(1286658638.277:2): operation="profile_load" pid=514 name="/sbin/dhclient3"
[ 7.706729] type=1505 audit(1286658638.277:3): operation="profile_load" pid=514 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 7.707043] type=1505 audit(1286658638.277:4): operation="profile_load" pid=514 name="/usr/lib/connman/scripts/dhclient-script"
[ 8.662274] lib80211: common routines for IEEE802.11 drivers
[ 8.662285] lib80211_crypt: registered algorithm 'NULL'
[ 8.740275] wl: module license 'MIXED/Proprietary' taints kernel.
[ 8.740285] Disabling lock debugging due to kernel taint
[ 8.743887] wl: disagrees about version of symbol lib80211_get_crypto_ops
[ 8.743899] wl: Unknown symbol lib80211_get_crypto_ops
[ 9.443680] intel_rng: FWH not detected
[ 9.461693] Linux video capture interface: v2.00
[ 9.561068] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0141)
[ 9.566215] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input7
[ 9.566566] usbcore: registered new interface driver uvcvideo
[ 9.566689] USB Video Class driver (v0.1.0)
[ 9.762104] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
[ 9.838553] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 10.103334] lp: driver loaded but no devices found
[ 11.337875] alloc irq_desc for 22 on node -1
[ 11.337885] alloc kstat_irqs on node -1
[ 11.337906] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 11.337998] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.607910] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 12.042134] type=1505 audit(1286658642.612:5): operation="profile_load" pid=765 name="/usr/share/gdm/guest-session/Xsession"
[ 12.045803] type=1505 audit(1286658642.616:6): operation="profile_replace" pid=777 name="/sbin/dhclient3"
[ 12.046368] type=1505 audit(1286658642.616:7): operation="profile_replace" pid=777 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 12.046692] type=1505 audit(1286658642.616:8): operation="profile_replace" pid=777 name="/usr/lib/connman/scripts/dhclient-script"
[ 12.175679] type=1505 audit(1286658642.745:9): operation="profile_load" pid=778 name="/usr/bin/evince"
[ 12.192104] type=1505 audit(1286658642.764:10): operation="profile_load" pid=778 name="/usr/bin/evince-previewer"
[ 12.205429] type=1505 audit(1286658642.776:11): operation="profile_load" pid=778 name="/usr/bin/evince-thumbnailer"
[ 15.226932] alloc irq_desc for 27 on node -1
[ 15.226940] alloc kstat_irqs on node -1
[ 15.227013] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[ 15.260605] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.716780] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 20.716791] vboxdrv: Successfully done.
[ 20.716797] vboxdrv: Found 2 processor cores.
[ 20.719211] vboxdrv: fAsync=0 offMin=0x198 offMax=0x8f4
[ 20.720930] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 20.720940] vboxdrv: Successfully loaded version 3.1.6_OSE (interface 0x00100001).
[ 23.062824] ppdev: user-space parallel port driver
[ 25.613469] CPU0 attaching NULL sched-domain.
[ 25.613485] CPU1 attaching NULL sched-domain.
[ 25.632190] CPU0 attaching sched-domain:
[ 25.632201] domain 0: span 0-1 level SIBLING
[ 25.632211] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 25.632230] domain 1: span 0-1 level MC
[ 25.632238] groups: 0-1 (cpu_power = 1178)
[ 25.632254] CPU1 attaching sched-domain:
[ 25.632260] domain 0: span 0-1 level SIBLING
[ 25.632268] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 25.632285] domain 1: span 0-1 level MC
[ 25.632292] groups: 0-1 (cpu_power = 1178)
[ 26.501102] CPU0 attaching NULL sched-domain.
[ 26.501117] CPU1 attaching NULL sched-domain.
[ 26.524196] CPU0 attaching sched-domain:
[ 26.524205] domain 0: span 0-1 level SIBLING
[ 26.524211] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 26.524224] domain 1: span 0-1 level MC
[ 26.524229] groups: 0-1 (cpu_power = 1178)
[ 26.524241] CPU1 attaching sched-domain:
[ 26.524246] domain 0: span 0-1 level SIBLING
[ 26.524251] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 26.524262] domain 1: span 0-1 level MC
[ 26.524267] groups: 0-1 (cpu_power = 1178)
[ 136.614492] Compat-wireless backport release: compat-wireless-2010-10-01-10-gb9b0a4f
[ 136.614511] Backport based on linux-next.git next-20101008
[ 136.749762] cfg80211: Calling CRDA to update world regulatory domain
[ 136.816701] cfg80211: World regulatory domain updated:
[ 136.816716] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 136.816732] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 136.816745] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 136.816758] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 136.816771] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 136.816783] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 137.031176] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 137.031206] b43-pci-bridge 0000:05:00.0: setting latency timer to 64
[ 137.048722] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[ 137.048794] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[ 137.048824] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[ 137.048853] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[ 137.097743] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
[ 137.172490] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 137.212386] b43-phy0 debug: Found PHY: Analog 6, Type 5, Revision 1
[ 137.212456] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2062, Revision 2
[ 137.311595] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 137.318458] Registered led device: b43-phy0::tx
[ 137.319365] Registered led device: b43-phy0::rx
[ 137.325175] Registered led device: b43-phy0::radio
[ 137.325251] Broadcom 43xx driver loaded [ Features: PMNLS, Firmware-ID: FW13 ]
[ 137.652384] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 137.655225] b43-phy0 debug: b2062: Using crystal tab entry 19200 kHz.
[ 143.092442] b43-phy0 debug: Chip initialized
[ 143.092975] b43-phy0 debug: 64-bit DMA initialized
[ 143.093743] b43-phy0 debug: QoS enabled
[ 143.118198] b43-phy0 debug: Wireless interface started
[ 143.125539] b43-phy0 debug: Adding Interface type 2
[ 143.127280] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 143.526802] b43-phy0 ERROR: Fatal DMA error: 0x00000800, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[ 143.526831] b43-phy0 ERROR: This device does not support DMA on your system. It will now be switched to PIO.
[ 143.526847] b43-phy0: Controller RESET (DMA error) ...
[ 143.527397] b43-phy0 debug: Wireless interface stopped
[ 143.528137] b43-phy0 debug: DMA-64 rx_ring: Used slots 1/64, Failed frames 0/0 = 0.0%, Average tries 0.00
[ 143.528510] b43-phy0 debug: DMA-64 tx_ring_AC_BK: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
[ 143.537216] b43-phy0 debug: DMA-64 tx_ring_AC_BE: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
[ 143.545143] b43-phy0 debug: DMA-64 tx_ring_AC_VI: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
[ 143.553165] b43-phy0 debug: DMA-64 tx_ring_AC_VO: Used slots 2/256, Failed frames 0/3 = 0.0%, Average tries 1.00
[ 143.561076] b43-phy0 debug: DMA-64 tx_ring_mcast: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
[ 143.756456] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 143.759103] b43-phy0 debug: b2062: Using crystal tab entry 19200 kHz.
[ 149.180419] b43-phy0 debug: Chip initialized
[ 149.180543] b43-phy0 debug: PIO initialized
[ 149.180657] b43-phy0 debug: QoS enabled
[ 149.203137] b43-phy0 debug: Wireless interface started
[ 149.203170] b43-phy0: Controller restarted
[ 156.413333] wlan0: authenticate with 00:02:84:7d:3c:02 (try 1)
[ 156.413363] wlan0: deauthenticating from 00:02:84:7d:3c:02 by local choice (reason=3)
[ 156.429131] wlan0: authenticate with 00:02:84:7d:3c:02 (try 1)
[ 156.430700] wlan0: authenticated
[ 156.430798] wlan0: associate with 00:02:84:7d:3c:02 (try 1)
[ 156.438443] wlan0: RX AssocResp from 00:02:84:7d:3c:02 (capab=0x431 status=0 aid=1)
[ 156.438464] wlan0: associated
[ 156.441553] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 159.370363] wlan0: disassociated from 00:02:84:7d:3c:02 (Reason: 15)
[ 159.384685] wlan0: deauthenticating from 00:02:84:7d:3c:02 by local choice (reason=3)
[ 159.400985] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 159.401010] cfg80211: Restoring regulatory settings
[ 159.401028] cfg80211: Calling CRDA to update world regulatory domain
[ 159.409187] cfg80211: World regulatory domain updated:
[ 159.409195] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 159.409204] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 159.409210] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 159.409217] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 159.409223] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 159.409230] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 160.797497] wlan0: authenticate with 00:02:84:7d:3c:02 (try 1)
[ 160.799111] wlan0: authenticated
[ 160.799210] wlan0: associate with 00:02:84:7d:3c:02 (try 1)
[ 160.803643] wlan0: RX AssocResp from 00:02:84:7d:3c:02 (capab=0x431 status=0 aid=1)
[ 160.803663] wlan0: associated
[ 163.788434] wlan0: disassociated from 00:02:84:7d:3c:02 (Reason: 15)
[ 163.812694] wlan0: deauthenticating from 00:02:84:7d:3c:02 by local choice (reason=3)
[ 163.817482] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 163.817506] cfg80211: Restoring regulatory settings
[ 163.817524] cfg80211: Calling CRDA to update world regulatory domain
[ 163.834504] cfg80211: World regulatory domain updated:
[ 163.834514] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 163.834525] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 163.834534] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 163.834543] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 163.834552] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 163.834560] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 165.217755] wlan0: authenticate with 00:02:84:7d:3c:02 (try 1)
[ 165.219316] wlan0: authenticated
[ 165.219417] wlan0: associate with 00:02:84:7d:3c:02 (try 1)
[ 165.223839] wlan0: RX AssocResp from 00:02:84:7d:3c:02 (capab=0x431 status=0 aid=1)
[ 165.223859] wlan0: associated
[ 166.809110] wlan0: no IPv6 routers present
[ 168.206385] wlan0: disassociated from 00:02:84:7d:3c:02 (Reason: 15)
[ 168.220589] wlan0: deauthenticating from 00:02:84:7d:3c:02 by local choice (reason=3)
[ 168.236576] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 168.236591] cfg80211: Restoring regulatory settings
[ 168.236600] cfg80211: Calling CRDA to update world regulatory domain
[ 168.247823] cfg80211: World regulatory domain updated:
[ 168.247837] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 168.247853] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 168.247866] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 168.247879] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 168.247892] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 168.247905] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 169.637391] wlan0: authenticate with 00:02:84:7d:3c:02 (try 1)
[ 169.639499] wlan0: authenticated
[ 169.639596] wlan0: associate with 00:02:84:7d:3c:02 (try 1)
[ 169.643837] wlan0: RX AssocResp from 00:02:84:7d:3c:02 (capab=0x431 status=0 aid=1)
[ 169.643858] wlan0: associated
[ 172.624353] wlan0: disassociated from 00:02:84:7d:3c:02 (Reason: 15)
[ 172.636673] wlan0: deauthenticating from 00:02:84:7d:3c:02 by local choice (reason=3)
[ 172.644950] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 172.644974] cfg80211: Restoring regulatory settings
[ 172.644990] cfg80211: Calling CRDA to update world regulatory domain
[ 172.658062] cfg80211: World regulatory domain updated:
[ 172.658080] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 172.658100] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 172.658119] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 172.658137] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 172.658155] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 172.658172] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 174.045029] wlan0: authenticate with 00:02:84:7d:3c:02 (try 1)
[ 174.046878] wlan0: authenticated
[ 174.047695] wlan0: associate with 00:02:84:7d:3c:02 (try 1)
[ 174.051819] wlan0: RX AssocResp from 00:02:84:7d:3c:02 (capab=0x431 status=0 aid=1)
[ 174.051840] wlan0: associated
[ 177.042314] wlan0: disassociated from 00:02:84:7d:3c:02 (Reason: 15)
[ 177.056640] wlan0: deauthenticating from 00:02:84:7d:3c:02 by local choice (reason=3)
[ 177.065380] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 177.065404] cfg80211: Restoring regulatory settings
[ 177.065420] cfg80211: Calling CRDA to update world regulatory domain
[ 177.073865] cfg80211: World regulatory domain updated:
[ 177.073877] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 177.073888] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 177.073897] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 177.073905] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 177.073913] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 177.073957] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-25-generic (buildd at rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 (Ubuntu 2.6.32-25.44-generic 2.6.32.21+drm33.7)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6d0000 - 000000003f6e2000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6e2000 - 000000003f6e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6e3000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0x3f6d0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f6d0000 (usable)
[ 0.000000] modified: 000000003f6d0000 - 000000003f6e2000 (ACPI data)
[ 0.000000] modified: 000000003f6e2000 - 000000003f6e3000 (ACPI NVS)
[ 0.000000] modified: 000000003f6e3000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 8e1000-9c2000
[ 0.000000] RAMDISK: 2eccd000 - 2f95bcb6
[ 0.000000] ACPI: RSDP 000f7a50 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 3f6d9f76 00084 (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 3f6e1bd7 000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 3f6db178 069EB (v01 INTEL CALISTGA 06040000 INTL 20061109)
[ 0.000000] ACPI: FACS 3f6e2fc0 00040
[ 0.000000] ACPI: HPET 3f6e1ccb 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 3f6e1d03 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TCPA 3f6e1d3f 00032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
[ 0.000000] ACPI: TMOR 3f6e1d71 00026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC 3f6e1d97 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 3f6e1dff 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 3f6e1e27 00176 (v01 LENOVO CB-01 06040000 LTP 00000000)
[ 0.000000] ACPI: ASF! 3f6e1f9d 00063 (v16 CETP CETP 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 3f6da596 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f6da4f0 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3f6d9ffa 004F6 (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00007000 - 0000df00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==> [0000100000 - 00008dced8]
[ 0.000000] #4 [002eccd000 - 002f95bcb6] RAMDISK ==> [002eccd000 - 002f95bcb6]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [00008dd000 - 00008e0210] BRK ==> [00008dd000 - 00008e0210]
[ 0.000000] #7 [00008e1000 - 00009bc000] PGTABLE ==> [00008e1000 - 00009bc000]
[ 0.000000] #8 [0000007000 - 000000e000] BOOTMAP ==> [0000007000 - 000000e000]
[ 0.000000] found SMP MP-table at [c00f7b60] f7b60
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f6d0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f6d0
[ 0.000000] On node 0 totalpages: 259691
[ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c1001000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32212 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c17f7000 s36056 r0 d21288 u65536
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257661
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=565e7bee-9137-4bf0-970a-b9c42bdb4880 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5195840 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f6d0)
[ 0.000000] Memory: 1002396k/1039168k available (4680k kernel code, 35960k reserved, 2122k data, 656k init, 129864k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB)
[ 0.000000] .data : 0xc05922c7 - 0xc07a4e68 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05922c7 (4680 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1596.297 MHz processor.
[ 0.004011] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.59 BogoMIPS (lpj=6385188)
[ 0.004051] Security Framework initialized
[ 0.004097] AppArmor: AppArmor initialized
[ 0.004113] Mount-cache hash table entries: 512
[ 0.004359] Initializing cgroup subsys ns
[ 0.004370] Initializing cgroup subsys cpuacct
[ 0.004380] Initializing cgroup subsys memory
[ 0.004395] Initializing cgroup subsys devices
[ 0.004401] Initializing cgroup subsys freezer
[ 0.004406] Initializing cgroup subsys net_cls
[ 0.004443] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.004453] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004460] CPU: L2 cache: 512K
[ 0.004465] CPU: Physical Processor ID: 0
[ 0.004470] CPU: Processor Core ID: 0
[ 0.008017] mce: CPU supports 5 MCE banks
[ 0.008034] CPU0: Thermal monitoring handled by SMI
[ 0.008043] using mwait in idle threads.
[ 0.008055] Performance Events: Atom events, Intel PMU driver.
[ 0.008072] ... version: 3
[ 0.008077] ... bit width: 40
[ 0.008082] ... generic registers: 2
[ 0.008087] ... value mask: 000000ffffffffff
[ 0.008092] ... max period: 000000007fffffff
[ 0.008097] ... fixed-purpose events: 3
[ 0.008101] ... event mask: 0000000700000003
[ 0.008110] Checking 'hlt' instruction... OK.
[ 0.024016] Disabling 4MB page tables to avoid TLB bug
[ 0.028492] ACPI: Core revision 20090903
[ 0.048018] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.048030] ftrace: allocating 21789 entries in 43 pages
[ 0.052110] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.052518] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.093788] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.096001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.184126] CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.184155] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.188037] Brought up 2 CPUs
[ 0.188045] Total of 2 processors activated (6384.52 BogoMIPS).
[ 0.188298] CPU0 attaching sched-domain:
[ 0.188307] domain 0: span 0-1 level SIBLING
[ 0.188312] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.188325] domain 1: span 0-1 level MC
[ 0.188330] groups: 0-1 (cpu_power = 1178)
[ 0.188343] CPU1 attaching sched-domain:
[ 0.188347] domain 0: span 0-1 level SIBLING
[ 0.188353] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.188364] domain 1: span 0-1 level MC
[ 0.188369] groups: 0-1 (cpu_power = 1178)
[ 0.188602] devtmpfs: initialized
[ 0.188602] regulator: core version 0.5
[ 0.188602] Time: 1:23:48 Date: 10/10/10
[ 0.188602] NET: Registered protocol family 16
[ 0.188602] Trying to unpack rootfs image as initramfs...
[ 0.188602] EISA bus registered
[ 0.188607] ACPI: bus type pci registered
[ 0.188788] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.188797] PCI: MCFG area at e0000000 reserved in E820
[ 0.188803] PCI: Using MMCONFIG for extended config space
[ 0.188810] PCI: Using configuration type 1 for base access
[ 0.193892] bio: create slab <bio-0> at 0
[ 0.196364] ACPI: EC: Look up EC in DSDT
[ 0.206507] ACPI: BIOS _OSI(Linux) query ignored
[ 0.212305] ACPI: Interpreter enabled
[ 0.212323] ACPI: (supports S0 S3 S4 S5)
[ 0.212395] ACPI: Using IOAPIC for interrupt routing
[ 0.233094] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.233802] ACPI: No dock devices found.
[ 0.235296] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.235501] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0500000-0xf057ffff]
[ 0.235515] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[ 0.235527] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.235540] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0600000-0xf063ffff]
[ 0.235608] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0580000-0xf05fffff]
[ 0.235776] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0640000-0xf0643fff]
[ 0.235872] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.235884] pci 0000:00:1b.0: PME# disabled
[ 0.236047] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.236059] pci 0000:00:1c.0: PME# disabled
[ 0.236198] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.236209] pci 0000:00:1c.1: PME# disabled
[ 0.236346] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.236357] pci 0000:00:1c.2: PME# disabled
[ 0.236456] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.236558] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.236667] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.236768] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.236871] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0844000-0xf08443ff]
[ 0.236960] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.236971] pci 0000:00:1d.7: PME# disabled
[ 0.237203] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.237214] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.237230] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
[ 0.237310] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.237328] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.237346] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.237362] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.237378] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.237465] pci 0000:00:1f.2: reg 10 io port: [0x18c8-0x18cf]
[ 0.237480] pci 0000:00:1f.2: reg 14 io port: [0x18c0-0x18c3]
[ 0.237495] pci 0000:00:1f.2: reg 18 io port: [0x18a8-0x18af]
[ 0.237511] pci 0000:00:1f.2: reg 1c io port: [0x180c-0x180f]
[ 0.237526] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[ 0.237542] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0844400-0xf08447ff]
[ 0.237587] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.237598] pci 0000:00:1f.2: PME# disabled
[ 0.237678] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[ 0.237973] pci 0000:02:00.0: reg 10 64bit mmio: [0xf0200000-0xf020ffff]
[ 0.238238] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.238256] pci 0000:02:00.0: PME# disabled
[ 0.238387] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.238399] pci 0000:00:1c.0: bridge 32bit mmio: [0xf0200000-0xf02fffff]
[ 0.238415] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf00fffff]
[ 0.238504] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff]
[ 0.238515] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0300000-0xf03fffff]
[ 0.238531] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf0100000-0xf01fffff]
[ 0.238922] pci 0000:05:00.0: reg 10 64bit mmio: [0xf0400000-0xf0403fff]
[ 0.239164] pci 0000:05:00.0: supports D1 D2
[ 0.239172] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.239189] pci 0000:05:00.0: PME# disabled
[ 0.239356] pci 0000:00:1c.2: bridge 32bit mmio: [0xf0400000-0xf04fffff]
[ 0.239451] pci 0000:00:1e.0: transparent bridge
[ 0.239505] pci_bus 0000:00: on NUMA node 0
[ 0.239526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.240198] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.240446] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.240675] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.240982] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.261863] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.262160] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
[ 0.262434] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.262702] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.262991] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.263265] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.263537] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.263808] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.264180] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.264215] vgaarb: loaded
[ 0.264617] SCSI subsystem initialized
[ 0.264869] libata version 3.00 loaded.
[ 0.265120] usbcore: registered new interface driver usbfs
[ 0.265165] usbcore: registered new interface driver hub
[ 0.265266] usbcore: registered new device driver usb
[ 0.265878] ACPI: WMI: Mapper loaded
[ 0.265886] PCI: Using ACPI for IRQ routing
[ 0.266771] NetLabel: Initializing
[ 0.266778] NetLabel: domain hash size = 128
[ 0.266783] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.266816] NetLabel: unlabeled traffic allowed by default
[ 0.266933] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.266949] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.272082] Switching to clocksource tsc
[ 0.277036] AppArmor: AppArmor Filesystem Enabled
[ 0.277084] pnp: PnP ACPI init
[ 0.277127] ACPI: bus type pnp registered
[ 0.284253] pnp: PnP ACPI: found 10 devices
[ 0.284261] ACPI: ACPI bus type pnp unregistered
[ 0.284272] PnPBIOS: Disabled by ACPI PNP
[ 0.284305] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.284316] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.284327] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.284337] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.284347] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.284358] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.284368] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.284378] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.284400] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.284422] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.284432] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 0.284442] system 00:05: ioport range 0x1180-0x11bf has been reserved
[ 0.284452] system 00:05: ioport range 0x1640-0x164f has been reserved
[ 0.284462] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 0.284472] system 00:05: ioport range 0x380-0x384 has been reserved
[ 0.284481] system 00:05: ioport range 0x386-0x387 has been reserved
[ 0.284500] system 00:06: ioport range 0x6a0-0x6af has been reserved
[ 0.284510] system 00:06: ioport range 0x6b0-0x6ff has been reserved
[ 0.319744] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.319758] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.319771] pci 0000:00:1c.0: MEM window: 0xf0200000-0xf02fffff
[ 0.319785] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f00fffff
[ 0.319801] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.319810] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.319823] pci 0000:00:1c.1: MEM window: 0xf0300000-0xf03fffff
[ 0.319834] pci 0000:00:1c.1: PREFETCH window: 0x000000f0100000-0x000000f01fffff
[ 0.319850] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
[ 0.319860] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.319872] pci 0000:00:1c.2: MEM window: 0xf0400000-0xf04fffff
[ 0.319884] pci 0000:00:1c.2: PREFETCH window: 0x00000040000000-0x000000401fffff
[ 0.319899] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.319906] pci 0000:00:1e.0: IO window: disabled
[ 0.319917] pci 0000:00:1e.0: MEM window: disabled
[ 0.319927] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.319967] alloc irq_desc for 17 on node -1
[ 0.319974] alloc kstat_irqs on node -1
[ 0.319991] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.320004] pci 0000:00:1c.0: setting latency timer to 64
[ 0.320027] alloc irq_desc for 16 on node -1
[ 0.320033] alloc kstat_irqs on node -1
[ 0.320045] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.320056] pci 0000:00:1c.1: setting latency timer to 64
[ 0.320077] alloc irq_desc for 18 on node -1
[ 0.320083] alloc kstat_irqs on node -1
[ 0.320094] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.320106] pci 0000:00:1c.2: setting latency timer to 64
[ 0.320124] pci 0000:00:1e.0: setting latency timer to 64
[ 0.320135] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.320144] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.320152] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.320161] pci_bus 0000:02: resource 1 mem: [0xf0200000-0xf02fffff]
[ 0.320170] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf00fffff]
[ 0.320179] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff]
[ 0.320187] pci_bus 0000:03: resource 1 mem: [0xf0300000-0xf03fffff]
[ 0.320196] pci_bus 0000:03: resource 2 pref mem [0xf0100000-0xf01fffff]
[ 0.320205] pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
[ 0.320213] pci_bus 0000:05: resource 1 mem: [0xf0400000-0xf04fffff]
[ 0.320222] pci_bus 0000:05: resource 2 pref mem [0x40000000-0x401fffff]
[ 0.320231] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.320239] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[ 0.320341] NET: Registered protocol family 2
[ 0.320634] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.321576] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.322738] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.323375] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.323389] TCP reno registered
[ 0.323697] NET: Registered protocol family 1
[ 0.323756] pci 0000:00:02.0: Boot video device
[ 0.323983] Simple Boot Flag at 0x36 set to 0x1
[ 0.324504] cpufreq-nforce2: No nForce2 chipset.
[ 0.324605] Scanning for low memory corruption every 60 seconds
[ 0.324955] audit: initializing netlink socket (disabled)
[ 0.324983] type=2000 audit(1286673828.322:1): initialized
[ 0.346619] highmem bounce pool size: 64 pages
[ 0.346637] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.351925] VFS: Disk quotas dquot_6.5.2
[ 0.352118] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.354187] fuse init (API version 7.13)
[ 0.354479] msgmni has been set to 1704
[ 0.355204] alg: No test for stdrng (krng)
[ 0.355398] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.355408] io scheduler noop registered
[ 0.355414] io scheduler anticipatory registered
[ 0.355420] io scheduler deadline registered
[ 0.355564] io scheduler cfq registered (default)
[ 0.355932] alloc irq_desc for 24 on node -1
[ 0.355939] alloc kstat_irqs on node -1
[ 0.355963] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.355983] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.356265] alloc irq_desc for 25 on node -1
[ 0.356272] alloc kstat_irqs on node -1
[ 0.356290] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.356310] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.356583] alloc irq_desc for 26 on node -1
[ 0.356590] alloc kstat_irqs on node -1
[ 0.356610] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.356630] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.356881] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.357172] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.361324] ACPI: AC Adapter [ACAD] (on-line)
[ 0.361618] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.361631] ACPI: Power Button [PWRB]
[ 0.361776] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.361786] ACPI: Sleep Button [SLPB]
[ 0.361932] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.459133] ACPI: Lid Switch [LID]
[ 0.459358] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.459369] ACPI: Power Button [PWRF]
[ 0.461109] ACPI: SSDT 3f6dae5f 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.462397] ACPI: SSDT 3f6da7f5 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.469210] Monitor-Mwait will be used to enter C-1 state
[ 0.469322] Monitor-Mwait will be used to enter C-2 state
[ 0.469409] Monitor-Mwait will be used to enter C-3 state
[ 0.469430] Marking TSC unstable due to TSC halts in idle
[ 0.469611] processor LNXCPU:00: registered as cooling_device0
[ 0.470702] ACPI: SSDT 3f6db0a4 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.471627] ACPI: SSDT 3f6dadda 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.473304] Switching to clocksource hpet
[ 0.475198] processor LNXCPU:01: registered as cooling_device1
[ 0.479445] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.513441] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.513472] ACPI: Thermal Zone [TZ00] (59 C)
[ 0.519183] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.523494] brd: module loaded
[ 0.525215] loop: module loaded
[ 0.525514] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.525811] ata_piix 0000:00:1f.1: version 2.13
[ 0.525846] alloc irq_desc for 19 on node -1
[ 0.525853] alloc kstat_irqs on node -1
[ 0.525871] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.525954] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.526122] isapnp: Scanning for PnP cards...
[ 0.575321] scsi0 : ata_piix
[ 0.619222] scsi1 : ata_piix
[ 0.620718] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.620729] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.620826] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.620842] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 0.708435] ata2: port disabled. ignoring.
[ 0.795644] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.851467] scsi2 : ata_piix
[ 0.868809] ACPI: Battery Slot [BAT0] (battery present)
[ 0.895345] isapnp: No Plug & Play device found
[ 0.895424] scsi3 : ata_piix
[ 0.895587] ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b0 irq 19
[ 0.895597] ata4: SATA max UDMA/133 cmd 0x18a8 ctl 0x180c bmdma 0x18b8 irq 19
[ 0.896832] Fixed MDIO Bus: probed
[ 0.896960] PPP generic driver version 2.4.2
[ 0.897226] tun: Universal TUN/TAP device driver, 1.6
[ 0.897234] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 0.897504] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.897567] alloc irq_desc for 23 on node -1
[ 0.897574] alloc kstat_irqs on node -1
[ 0.897592] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.897632] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.897642] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.897751] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.897801] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.897826] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.901729] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.901890] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0844000
[ 0.917080] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.917414] usb usb1: configuration #1 chosen from 1 choice
[ 0.917513] hub 1-0:1.0: USB hub found
[ 0.917538] hub 1-0:1.0: 8 ports detected
[ 0.917717] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.917769] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.917860] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.917880] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.917891] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.918052] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.918107] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 0.918394] usb usb2: configuration #1 chosen from 1 choice
[ 0.918483] hub 2-0:1.0: USB hub found
[ 0.918505] hub 2-0:1.0: 2 ports detected
[ 0.918638] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.918655] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.918665] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.918775] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.918822] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 0.919100] usb usb3: configuration #1 chosen from 1 choice
[ 0.919191] hub 3-0:1.0: USB hub found
[ 0.919216] hub 3-0:1.0: 2 ports detected
[ 0.919350] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.919369] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.919379] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.919504] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.919568] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 0.919851] usb usb4: configuration #1 chosen from 1 choice
[ 0.919938] hub 4-0:1.0: USB hub found
[ 0.919960] hub 4-0:1.0: 2 ports detected
[ 0.920107] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.920128] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.920138] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.920268] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.920333] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 0.920611] usb usb5: configuration #1 chosen from 1 choice
[ 0.920699] hub 5-0:1.0: USB hub found
[ 0.920722] hub 5-0:1.0: 2 ports detected
[ 0.921076] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.926388] Freeing initrd memory: 12859k freed
[ 0.933222] Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.933240] If AUX port is really absent please use the 'i8042.noaux' option.
[ 0.946297] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.946320] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.946636] mice: PS/2 mouse device common for all mice
[ 0.947012] rtc_cmos 00:07: RTC can wake from S4
[ 0.947125] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.947180] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.947520] device-mapper: uevent: version 1.0.3
[ 0.947858] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel at redhat.com
[ 0.948065] device-mapper: multipath: version 1.1.0 loaded
[ 0.948073] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.948434] EISA: Probing bus 0 at eisa.0
[ 0.948449] Cannot allocate resource for EISA slot 1
[ 0.948456] Cannot allocate resource for EISA slot 2
[ 0.948463] Cannot allocate resource for EISA slot 3
[ 0.948470] Cannot allocate resource for EISA slot 4
[ 0.948498] EISA: Detected 0 cards.
[ 0.948917] cpuidle: using governor ladder
[ 0.949213] cpuidle: using governor menu
[ 0.950234] TCP cubic registered
[ 0.950646] NET: Registered protocol family 10
[ 0.951666] lo: Disabled Privacy Extensions
[ 0.952426] NET: Registered protocol family 17
[ 0.953607] Using IPI No-Shortcut mode
[ 0.953835] PM: Resume from disk failed.
[ 0.953862] registered taskstats version 1
[ 0.954825] Magic number: 14:699:356
[ 0.954837] input event2: hash matches
[ 0.954983] rtc_cmos 00:07: setting system clock to 2010-10-10 01:23:49 UTC (1286673829)
[ 0.954991] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.954995] EDD information not available.
[ 0.968894] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.108958] ata3.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133
[ 1.108976] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.116978] ata3.00: configured for UDMA/133
[ 1.117255] scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5
[ 1.117648] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.117717] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.117853] sd 2:0:0:0: [sda] Write Protect is off
[ 1.117863] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.117968] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.118365] sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[ 1.163410] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.163458] Freeing unused kernel memory: 656k freed
[ 1.164080] Write protecting the kernel text: 4684k
[ 1.164169] Write protecting the kernel read-only data: 1840k
[ 1.206830] udev: starting version 151
[ 1.229110] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 1.468154] Linux agpgart interface v0.103
[ 1.479285] tg3.c:v3.102 (September 1, 2009)
[ 1.479378] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.479405] tg3 0000:02:00.0: setting latency timer to 64
[ 1.550974] usb 1-3: configuration #1 chosen from 1 choice
[ 1.572832] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.573423] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 1.576383] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.604361] acpi device:03: registered as cooling_device2
[ 1.604716] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.604829] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.690049] [drm] Initialized drm 1.1.0 20060810
[ 1.700168] usb 1-5: new high speed USB device using ehci_hcd and address 3
[ 1.758908] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.758923] i915 0000:00:02.0: setting latency timer to 64
[ 1.770241] [drm] set up 7M of stolen space
[ 1.831569] eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:26:9e:70:80:c2
[ 1.831580] eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[ 1.831589] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[ 1.831596] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.843455] usb 1-5: configuration #1 chosen from 1 choice
[ 1.873137] Initializing USB Mass Storage driver...
[ 1.873456] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1.873746] [drm] initialized overlay support
[ 1.874073] usbcore: registered new interface driver usb-storage
[ 1.874081] USB Mass Storage support registered.
[ 1.875012] usb-storage: device found at 3
[ 1.875018] usb-storage: waiting for device to settle before scanning
[ 2.258850] fb0: inteldrmfb frame buffer device
[ 2.258859] registered panic notifier
[ 2.258878] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.263839] vga16fb: initializing
[ 2.263850] vga16fb: mapped to 0xc00a0000
[ 2.263860] vga16fb: not registering due to another framebuffer present
[ 2.651285] Console: switching to colour frame buffer device 128x37
[ 3.396805] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[ 3.396817] EXT4-fs (sda6): write access will be enabled during recovery
[ 3.838474] EXT4-fs (sda6): recovery complete
[ 3.839626] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 6.872552] usb-storage: device scan complete
[ 6.874700] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 6.875868] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 6.879888] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 19.681972] udev: starting version 151
[ 19.688149] Adding 2353480k swap on /dev/sda7. Priority:-1 extents:1 across:2353480k
[ 19.830877] lp: driver loaded but no devices found
[ 20.230717] lib80211: common routines for IEEE802.11 drivers
[ 20.230726] lib80211_crypt: registered algorithm 'NULL'
[ 20.317145] intel_rng: FWH not detected
[ 20.386714] wl: module license 'MIXED/Proprietary' taints kernel.
[ 20.386727] Disabling lock debugging due to kernel taint
[ 20.390264] wl: disagrees about version of symbol lib80211_get_crypto_ops
[ 20.390278] wl: Unknown symbol lib80211_get_crypto_ops
[ 20.400750] Linux video capture interface: v2.00
[ 20.564782] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0141)
[ 20.568830] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input7
[ 20.569229] usbcore: registered new interface driver uvcvideo
[ 20.569838] USB Video Class driver (v0.1.0)
[ 20.795529] type=1505 audit(1286659449.337:2): operation="profile_load" pid=641 name="/sbin/dhclient3"
[ 20.796440] type=1505 audit(1286659449.341:3): operation="profile_load" pid=641 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 20.796909] type=1505 audit(1286659449.341:4): operation="profile_load" pid=641 name="/usr/lib/connman/scripts/dhclient-script"
[ 21.095232] alloc irq_desc for 22 on node -1
[ 21.095241] alloc kstat_irqs on node -1
[ 21.095261] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 21.095347] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 21.293364] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 21.423653] type=1505 audit(1286659449.965:5): operation="profile_load" pid=781 name="/usr/share/gdm/guest-session/Xsession"
[ 21.450405] type=1505 audit(1286659449.993:6): operation="profile_replace" pid=783 name="/sbin/dhclient3"
[ 21.451207] type=1505 audit(1286659449.993:7): operation="profile_replace" pid=783 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 21.451668] type=1505 audit(1286659449.993:8): operation="profile_replace" pid=783 name="/usr/lib/connman/scripts/dhclient-script"
[ 21.504680] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
[ 21.516533] type=1505 audit(1286659450.061:9): operation="profile_load" pid=785 name="/usr/bin/evince"
[ 21.587982] alloc irq_desc for 27 on node -1
[ 21.587992] alloc kstat_irqs on node -1
[ 21.588075] tg3 0000:02:00.0: irq 27 for MSI/MSI-X
[ 21.591131] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 21.630689] type=1505 audit(1286659450.173:10): operation="profile_load" pid=785 name="/usr/bin/evince-previewer"
[ 21.676652] type=1505 audit(1286659450.221:11): operation="profile_load" pid=785 name="/usr/bin/evince-thumbnailer"
[ 21.696438] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.747224] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 23.747235] vboxdrv: Successfully done.
[ 23.747242] vboxdrv: Found 2 processor cores.
[ 23.747622] vboxdrv: fAsync=0 offMin=0x1a4 offMax=0x984
[ 23.749635] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 23.749646] vboxdrv: Successfully loaded version 3.1.6_OSE (interface 0x00100001).
[ 24.927789] ppdev: user-space parallel port driver
[ 26.289115] CPU0 attaching NULL sched-domain.
[ 26.289132] CPU1 attaching NULL sched-domain.
[ 26.309197] CPU0 attaching sched-domain:
[ 26.309208] domain 0: span 0-1 level SIBLING
[ 26.309216] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 26.309233] domain 1: span 0-1 level MC
[ 26.309240] groups: 0-1 (cpu_power = 1178)
[ 26.309256] CPU1 attaching sched-domain:
[ 26.309263] domain 0: span 0-1 level SIBLING
[ 26.309270] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 26.309287] domain 1: span 0-1 level MC
[ 26.309294] groups: 0-1 (cpu_power = 1178)
[ 85.363903] lib80211_crypt: unregistered algorithm 'NULL'
[ 93.427201] lib80211: common routines for IEEE802.11 drivers
[ 93.427222] lib80211_crypt: registered algorithm 'NULL'
[ 111.883611] lib80211_crypt: registered algorithm 'TKIP'
[ 119.027432] wl 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 119.027452] wl 0000:05:00.0: setting latency timer to 64
[ 119.052388] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.60.48.36
[ 119.066187] udev: renamed network interface eth1 to eth2
[ 130.004053] eth2: no IPv6 routers present
[ 160.781672] wl 0000:05:00.0: PCI INT A disabled
[ 167.156532] Compat-wireless backport release: compat-wireless-2010-10-01-10-gb9b0a4f
[ 167.156551] Backport based on linux-next.git next-20101008
[ 167.250142] cfg80211: Calling CRDA to update world regulatory domain
[ 167.293442] cfg80211: World regulatory domain updated:
[ 167.293457] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 167.293473] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 167.293486] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 167.293499] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 167.293512] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 167.293525] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 167.472625] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 167.472660] b43-pci-bridge 0000:05:00.0: setting latency timer to 64
[ 167.493147] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[ 167.493378] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[ 167.493414] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[ 167.493451] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[ 167.540593] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
[ 167.605320] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 167.648314] b43-phy0 debug: Found PHY: Analog 6, Type 5, Revision 1
[ 167.648384] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2062, Revision 2
[ 167.675019] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 167.688904] Registered led device: b43-phy0::tx
[ 167.690284] Registered led device: b43-phy0::rx
[ 167.691465] Registered led device: b43-phy0::radio
[ 167.691546] Broadcom 43xx driver loaded [ Features: PMNLS, Firmware-ID: FW13 ]
[ 168.040432] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 168.043077] b43-phy0 debug: b2062: Using crystal tab entry 19200 kHz.
[ 173.464349] b43-phy0 debug: Chip initialized
[ 173.464886] b43-phy0 debug: 64-bit DMA initialized
[ 173.465169] b43-phy0 debug: QoS enabled
[ 173.485772] b43-phy0 debug: Wireless interface started
[ 173.486034] b43-phy0 debug: Adding Interface type 2
[ 173.495093] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 181.121780] wlan0: deauthenticating from 00:02:84:7d:3c:02 by local choice (reason=3)
[ 181.129389] wlan0: authenticate with 00:02:84:7d:3c:02 (try 1)
[ 181.131077] wlan0: authenticated
[ 181.131675] wlan0: associate with 00:02:84:7d:3c:02 (try 1)
[ 181.135917] wlan0: RX AssocResp from 00:02:84:7d:3c:02 (capab=0x431 status=0 aid=1)
[ 181.135926] wlan0: associated
[ 181.139065] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 181.251860] padlock: VIA PadLock not detected.
[ 181.275871] b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac: 00:02:84:7d:3c:02
[ 191.900168] wlan0: no IPv6 routers present
More information about the b43-dev
mailing list