[ath9k-devel] phy0: Chip reset failed

[Oleksij Rempel]

Am 21.06.2013 02:44, schrieb stoffer at skulp.net:
>> kernel 3.9.4:
>>
>> Jun 20 19:38:46 pi4 kernel: [ 1483.808643] ath: phy0: Timeout waiting for WMI command: WMI_NODE_CREATE_CMDID
>> Jun 20 19:38:46 pi4 kernel: [ 1483.808683] ath: phy0: Unable to add station entry for: 64:70:02:22:ea:71
>> Jun 20 19:38:46 pi4 kernel: [ 1483.808709] wlan0: failed to move IBSS STA 64:70:02:22:ea:71 to state 3 (-110) - keeping it anyway
>> Jun 20 19:38:47 pi4 kernel: [ 1484.808694] ath: phy0: Timeout waiting for WMI command: WMI_REG_READ_CMDID
>> Jun 20 19:38:47 pi4 kernel: [ 1484.808735] ath: phy0: REGISTER READ FAILED: (0x4048, -110)
>> Jun 20 19:38:48 pi4 kernel: [ 1485.178685] ath: phy0: Dropping a packet due to TX timeout
>> Jun 20 19:38:48 pi4 kernel: [ 1485.808740] ath: phy0: Timeout waiting for WMI command: WMI_REG_WRITE_CMDID
>> Jun 20 19:38:48 pi4 kernel: [ 1485.808781] ath: phy0: REGISTER WRITE FAILED:(0x4048, -110)
>> Jun 20 19:38:49 pi4 kernel: [ 1486.228742] ath: phy0: Dropping a packet due to TX timeout
>> Jun 20 19:38:49 pi4 kernel: [ 1486.808790] ath: phy0: Timeout waiting for WMI command: WMI_REG_READ_CMDID
>
> downgraded to kernel 3.2.27 and now they have been running fine since (2 hours)...

Hmm.. looks like firmware died.
How long do you run to reproduce it? How many peers are in this mesh? Do 
you run in adhock mode?
If it is regression, can you please run "git bisect"?


-- 
Regards,
Oleksij