[PATCH 00/42] build fixes part 2

[Adrian Chadd]

Sweet!

Thanks!



Adrian

On 5 April 2013 10:21, Oleksij Rempel <linux at rempel-privat.de> wrote:
> Am 01.04.2013 18:51, schrieb Adrian Chadd:
>>
>> On 1 April 2013 09:48, Oleksij Rempel <linux at rempel-privat.de> wrote:
>>
>>> Am 01.04.2013 18:31, schrieb Adrian Chadd:
>>
>>
>>> Currently i run only one test:
>>> - connect in client mode to some ap
>>> - run "netperf -H some.host -l 60
>>>
>>> i would like to make some scripted test. Are there any suggestions?
>>
>>
>> AP mode is supposed to work in a very basic way, right?
>>
>> I think doing:
>>
>> * udp iperf
>> * tcp iperf, one way and then the other
>> * tcp bi-directional test (ie, iperf runs two tcp connections, one each
>> way)
>>
>> in both STA and AP mode
>>
>> that's likely a good starting point.
>>
>
> So... :) some test are done.
> Now i have one more device for testing: AR7010+AR9287.
>
> My setup:
> AR7010+AR9287(ap) -> AR7010+AR9280(client) -- about 1 meter distance.
> on ap, firmware is form my git. On client i use default firmware provided by
> dist.
> speed on this connection was about 80Mbit. Since both devices are 2x2:2 i
> was expecting a bit more :)
>
> Second variant:
> AR9271(ap)-> AR7010+AR9280(client)
> here i got about 50Mbit. Here i expected at least 70Mbit.
>
>
> test results from first variant:
> ./tests 192.168.1.4
> tcp from client to server
> MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
> 192.168.1.4 (192.168.1.4) port 0 AF_INET : demo
> Recv   Send    Send
> Socket Socket  Message  Elapsed
> Size   Size    Size     Time     Throughput
> bytes  bytes   bytes    secs.    10^6bits/sec
>
>  87380  16384  16384    10.01      80.41
> tcp from server to client
> MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
> 192.168.1.4 (192.168.1.4) port 0 AF_INET : demo
> Recv   Send    Send
> Socket Socket  Message  Elapsed
> Size   Size    Size     Time     Throughput
> bytes  bytes   bytes    secs.    10^6bits/sec
>
>  87380  16384  16384    10.03      88.80
> udp from client to server
> MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
> 192.168.1.4 (192.168.1.4) port 0 AF_INET : demo
> Socket  Message  Elapsed      Messages
> Size    Size     Time         Okay Errors   Throughput
> bytes   bytes    secs            #      #   10^6bits/sec
>
> 212992   65507   10.00        1839      0      96.35
> 180224           10.00        1839             96.35
>
> two tcp tasts at same time. both directions
> MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
> 192.168.1.4 (192.168.1.4) port 0 AF_INET : demo
> MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
> 192.168.1.4 (192.168.1.4) port 0 AF_INET : demo
> Recv   Send    Send
> Socket Socket  Message  Elapsed
> Size   Size    Size     Time     Throughput
> bytes  bytes   bytes    secs.    10^6bits/sec
>
>  87380  16384  16384    10.02      39.48
> Recv   Send    Send
> Socket Socket  Message  Elapsed
> Size   Size    Size     Time     Throughput
> bytes  bytes   bytes    secs.    10^6bits/sec
>
>  87380  16384  16384    10.04      51.39
>
>
>
> --
> Regards,
> Oleksij