[PATCH ath-next] wifi: ath12k: avoid setting 320MHZ support on non 6GHz band

[Nicolas Escande]

On Fri Jan 23, 2026 at 3:42 PM CET, Nicolas Escande wrote:
> On a split phy qcn9274 (2.4GHz + 5GHz low), "iw phy" reports 320MHz
> realated features on the 5GHz band while it should not:
>
>     Wiphy phy1
>     [...]
>         Band 2:
>     [...]
>             EHT Iftypes: managed
>     [...]
>                 EHT PHY Capabilities: (0xe2ffdbe018778000):
>                     320MHz in 6GHz Supported
>     [...]
>                     Beamformee SS (320MHz): 7
>     [...]
>                     Number Of Sounding Dimensions (320MHz): 3
>     [...]
>                 EHT MCS/NSS: (0x22222222222222222200000000):
>
> This is also reflected in the beacons sent by a mesh interface started on
> that band. They erroneously advertise 320MHZ support too.
>
> This should not happen as the spec at section 9.4.2.323.3 says we should
> not set the 320MHz related fields when not operating on a 6GHz band.
> For example it says about Bit 0 "Support For 320 MHz In 6 GHz"
>
>   "Reserved if the EHT Capabilities element is indicating capabilities for
>    the 2.4 GHz or 5 GHz bands."
>
> Fix this by clearing the related bits when converting from WMI eht phy
> capabilities to mac80211 phy capabilities, for bands other than 6GHz.
>
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00218-QCAHKSWPL_SILICONZ-1
>
> Signed-off-by: Nicolas Escande <nico.escande at gmail.com>
> ---
>  drivers/net/wireless/ath/ath12k/wmi.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c
> index 84c29e4896a4..14947fdb9813 100644
> --- a/drivers/net/wireless/ath/ath12k/wmi.c
> +++ b/drivers/net/wireless/ath/ath12k/wmi.c
> @@ -4888,6 +4888,7 @@ static void ath12k_wmi_eht_caps_parse(struct ath12k_pdev *pdev, u32 band,
>  				       __le32 cap_info_internal)
>  {
>  	struct ath12k_band_cap *cap_band = &pdev->cap.band[band];
> +	u8 *phy_cap = (u8 *)&cap_band->eht_cap_phy_info[0];
>  	u32 support_320mhz;
>  	u8 i;
>  
> @@ -4901,8 +4902,14 @@ static void ath12k_wmi_eht_caps_parse(struct ath12k_pdev *pdev, u32 band,
>  	for (i = 0; i < WMI_MAX_EHTCAP_PHY_SIZE; i++)
>  		cap_band->eht_cap_phy_info[i] = le32_to_cpu(cap_phy_info[i]);
>  
> -	if (band == NL80211_BAND_6GHZ)
> +	if (band == NL80211_BAND_6GHZ) {
>  		cap_band->eht_cap_phy_info[0] |= support_320mhz;
> +	} else {
> +		phy_cap[0] &= ~IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ;
> +		phy_cap[1] &= ~IEEE80211_EHT_PHY_CAP1_BEAMFORMEE_SS_320MHZ_MASK;
> +		phy_cap[2] &= ~IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_320MHZ_MASK;
> +		phy_cap[6] &= ~IEEE80211_EHT_PHY_CAP6_MCS15_SUPP_320MHZ;
> +	}
>  
>  	cap_band->eht_mcs_20_only = le32_to_cpu(supp_mcs[0]);
>  	cap_band->eht_mcs_80 = le32_to_cpu(supp_mcs[1]);

Hello people from QCA.

Is there interest for this patch ?
I can make additionnal changes if need be.

Thanks