[PATCH ath-next 2/2] wifi: ath12k: fix NULL deref in change_sta_links for unready link

Wei Zhang wei.zhang at oss.qualcomm.com
Mon May 11 21:49:05 PDT 2026


_ieee80211_set_active_links() calls _ieee80211_link_use_channel() for
each newly-added link and WARN_ON_ONCE()s if it fails. The call uses
assign_on_failure=true, which allows mac80211 to continue despite
driver failures, but when a mac80211-level channel validation fails
(e.g., combinations check, DFS, or no available radio),
drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create()
is only called from that path, arvif->is_created remains false and
arvif->ar remains NULL for the failed link.

The subsequent drv_change_sta_links() call reaches
ath12k_mac_op_change_sta_links(), which allocates an arsta and sets
ahsta->links_map |= BIT(link_id) for the broken link before checking
whether the link is ready. When the vdev was never created, only
station_add() is skipped, but the link remains in links_map.

Any subsequent operation iterating links_map and dereferencing arvif->ar
without a NULL check will crash. Two observed examples are NULL deref in
ath12k_mac_ml_station_remove() on disconnect and in ath12k_mac_op_set_key()
when wpa_supplicant installs PTK keys.

  BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
  pc : ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
  Call trace:
   ath12k_mac_station_post_remove+0x40/0xe8 [ath12k]
   ath12k_mac_op_sta_state+0xb60/0x1720 [ath12k]
   drv_sta_state+0x100/0xbd8 [mac80211]
   __sta_info_destroy_part2+0x148/0x178 [mac80211]
   ieee80211_set_disassoc+0x500/0x678 [mac80211]

  BUG: Unable to handle kernel NULL pointer dereference at 0x00000000
  pc : ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
  Call trace:
   ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k]
   drv_set_key+0x70/0x100 [mac80211]
   ieee80211_key_enable_hw_accel+0x78/0x260 [mac80211]
   ieee80211_add_key+0x16c/0x2ac [mac80211]
   nl80211_new_key+0x138/0x280 [cfg80211]

Fix this by checking arvif->is_created before calling
ath12k_mac_alloc_assign_link_sta(). This prevents the broken link from
entering links_map, so all subsequent operations iterating the bitmap
are protected. The reliability of arvif->is_created across all error
paths is ensured by the preceding patch.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3

Fixes: a27fa6148dac ("wifi: ath12k: support change_sta_links() mac80211 op")
Signed-off-by: Wei Zhang <wei.zhang at oss.qualcomm.com>
---
 drivers/net/wireless/ath/ath12k/mac.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 8f8456509468..529a693fdd28 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -8045,16 +8045,16 @@ int ath12k_mac_op_change_sta_links(struct ieee80211_hw *hw,
 			continue;
 
 		arvif = wiphy_dereference(hw->wiphy, ahvif->link[link_id]);
-		arsta = ath12k_mac_alloc_assign_link_sta(ah, ahsta, ahvif, link_id);
+		if (!arvif || !arvif->is_created)
+			continue;
 
-		if (!arvif || !arsta) {
+		arsta = ath12k_mac_alloc_assign_link_sta(ah, ahsta, ahvif, link_id);
+		if (!arsta) {
 			ath12k_hw_warn(ah, "Failed to alloc/assign link sta");
 			continue;
 		}
 
 		ar = arvif->ar;
-		if (!ar)
-			continue;
 
 		ret = ath12k_mac_station_add(ar, arvif, arsta);
 		if (ret) {
-- 
2.34.1




More information about the ath12k mailing list