[PATCH ath-next] wifi: ath12k: reset REOQ LUT addresses before firmware stop

[Jeff Johnson]

On Fri, 19 Jun 2026 17:37:51 +0530, Aishwarya R wrote:
> During module removal, REOQ LUT cleanup writes 0 to the REOQ/ML-REOQ
> LUT address registers. That cleanup runs from ath12k_core_stop(),
> after ath12k_qmi_firmware_stop() has already stopped the
> firmware (mode OFF), so the register writes can hit an invalid target
> access.
> 
> Move the REOQ LUT register reset before ath12k_qmi_firmware_stop(),
> so the registers are cleared before stopping the firmware,
> while register access is still valid.
> 
> [...]

Applied, thanks!

[1/1] wifi: ath12k: reset REOQ LUT addresses before firmware stop
      commit: fe2b006c15f6b1f81524b4c1af8013bc32fa0abc

Best regards,
-- 
Jeff Johnson <jeff.johnson at oss.qualcomm.com>