[PATCH ath-next 2/2] wifi: ath12k: fix MLO peer delete race

[Baochen Qiang]

On 6/29/2026 1:34 PM, Rameshkumar Sundaram wrote:
> On 6/17/2026 2:58 PM, Baochen Qiang wrote:
>> ath12k_peer_mlo_link_peers_delete() sends WMI peer_delete for every
>> link before waiting for any peer_unmap / peer_delete_resp event. The
>> shared per-radio completion ar->peer_delete_done could not
>> disambiguate which peer a response was for: every call to
>> ath12k_peer_delete_send() did
>> reinit_completion(&ar->peer_delete_done), so when an event for the
>> first link arrived between two sends it raised the count to 1 and
>> the second send promptly cleared it; the wait for the second link
>> then timed out with
>>
>>      Timeout in receiving peer delete response
>>
>> Replace the shared completion with a per-radio waiter list, with
>> each pending ath12k_peer_delete() caller queueing an
>> ath12k_peer_delete_wait carrying its (vdev_id, addr) and a private
>> struct completion. ath12k_peer_delete_resp_event() matches the
>> response against the list under ar->data_lock and signals the
>> matching waiter.
>>
>> Also correct the endian conversion in ath12k_peer_delete_resp_event()
>> logging, and add the missing \n in some logging.
>>
>> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
>>
>> Fixes: 8e6f8bc28603 ("wifi: ath12k: Add MLO station state change handling")
>> Signed-off-by: Baochen Qiang <baochen.qiang at oss.qualcomm.com>
>> ---
>>   drivers/net/wireless/ath/ath12k/core.c |   2 +-
>>   drivers/net/wireless/ath/ath12k/core.h |   5 +-
>>   drivers/net/wireless/ath/ath12k/mac.c  |   2 +-
>>   drivers/net/wireless/ath/ath12k/peer.c | 130 ++++++++++++++++++++++++++-------
>>   drivers/net/wireless/ath/ath12k/peer.h |  19 ++++-
>>   drivers/net/wireless/ath/ath12k/wmi.c  |  16 ++--
>>   6 files changed, 136 insertions(+), 38 deletions(-)
>>
>> diff --git a/drivers/net/wireless/ath/ath12k/core.c b/drivers/net/wireless/ath/ath12k/
>> core.c
>> index 742d4fd1b598..f71650039292 100644
>> --- a/drivers/net/wireless/ath/ath12k/core.c
>> +++ b/drivers/net/wireless/ath/ath12k/core.c
> 
> { ... }
> 
>> diff --git a/drivers/net/wireless/ath/ath12k/peer.h b/drivers/net/wireless/ath/ath12k/
>> peer.h
>> index 49d89796bc46..3dc720a3dc12 100644
>> --- a/drivers/net/wireless/ath/ath12k/peer.h
>> +++ b/drivers/net/wireless/ath/ath12k/peer.h
>> @@ -9,13 +9,28 @@
>>     #include "dp_peer.h"
>>   +struct ath12k_peer_delete_wait {
>> +    struct list_head list;
>> +    u32 vdev_id;
>> +    u8 addr[ETH_ALEN];
>> +    struct completion done;
>> +};
>> +
>> +void ath12k_peer_delete_wait_register(struct ath12k *ar,
>> +                      struct ath12k_peer_delete_wait *wait,
>> +                      u32 vdev_id, const u8 *addr);
>> +void ath12k_peer_delete_wait_unregister(struct ath12k *ar,
>> +                    struct ath12k_peer_delete_wait *wait);
> 
> 
> The struct and functions appear to be used only within peer.c and are not referenced
> elsewhere. Could the function be made static in peer.c ?

Yeah, I can do that.

> 
>> +void ath12k_peer_delete_resp_signal(struct ath12k *ar, u32 vdev_id, const u8 *addr);
>> +void ath12k_peer_delete_wait_flush(struct ath12k *ar);
> 
> 
> -- 
> Ramesh