[PATCH ath-current v2 0/8] wifi: ath12k: support firmware-allocated MLD peer ID

[Rameshkumar Sundaram]

On 7/20/2026 12:13 PM, Baochen Qiang wrote:
> ath12k currently assumes the host allocates the MLD peer ID and passes
> it down to firmware via WMI_PEER_ASSOC_CMDID. This works on QCN9274
> but breaks WCN7850/QCC2072, whose firmware always picks the ID itself
> and reports it back through HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP. As a
> result dp_hw->dp_peers[] is never populated for MLO peers and the data
> path lookup fails. On QCC2072 the firmware additionally crashes on MLO
> disconnect when ATH12K_WMI_FLAG_MLO_PEER_ID_VALID was set in the peer
> assoc command.
> 
> Add a host_alloc_ml_id hw_param to branch behavior, defer the
> dp_peers[] publish to the HTT event for firmware-allocated chips, and
> propagate the firmware-assigned ID through the existing host
> bookkeeping when it arrives.
> 
> Patch summary:
> 
> 1: fix for an out-of-bounds clear_bit() in
>       ath12k_mac_dp_peer_cleanup().
>    2: group peer assoc send-and-wait into a helper
>    3: refactor, keep ATH12K_PEER_ML_ID_VALID set in ahsta->ml_peer_id
>       so later patches do not have to OR or mask it at every call site;
>    4: parse the HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP message;
>    5: introduce hw_param host_alloc_ml_id, set true on QCN9274 family
>       and false on WCN7850/QCC2072;
>    6: on host_alloc_ml_id == false, leave peer_id_valid unset and send
>       ml_peer_id == 0 in WMI_PEER_ASSOC_CMDID;
>    7: on host_alloc_ml_id == false, mark ahsta->ml_peer_id and
>       dp_peer->peer_id as ATH12K_MLO_PEER_ID_PENDING and skip the
>       dp_hw->dp_peers[] publish until the firmware reports the ID;
>    8: in the MLO_RX_PEER_MAP handler, propagate the firmware-assigned
>       ID into dp_peer->peer_id, every dp_link_peer in
>       dp_peer->link_peers[], and ahsta->ml_peer_id, all under
>       dp_hw->peer_lock.
> 
> ---
> Changes in v2:
> - patch 5/8: initialize ret before goto err handling in ath12k_mac_allocate()
> - Link to v1: https://lore.kernel.org/r/20260713-ath12k-fw-allocated-ml-peer-id-v1-0-d0a2a1a519eb@oss.qualcomm.com
> 
> ---
> Baochen Qiang (8):
>        wifi: ath12k: fix out-of-bounds clear_bit in ath12k_mac_dp_peer_cleanup()
>        wifi: ath12k: factor out peer assoc send-and-wait into a helper
>        wifi: ath12k: keep ATH12K_PEER_ML_ID_VALID set in ath12k_sta::ml_peer_id
>        wifi: ath12k: add support for HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP
>        wifi: ath12k: introduce host_alloc_ml_id hardware parameter
>        wifi: ath12k: do not advertise MLD peer ID for firmware-allocate devices
>        wifi: ath12k: defer dp_peer registration when firmware allocates MLD peer ID
>        wifi: ath12k: resolve PENDING ML peer ID from MLO_PEER_MAP HTT event
> 
>   drivers/net/wireless/ath/ath12k/core.c     |   2 +
>   drivers/net/wireless/ath/ath12k/core.h     |   3 +
>   drivers/net/wireless/ath/ath12k/dp_htt.c   |  49 +++++++++
>   drivers/net/wireless/ath/ath12k/dp_htt.h   |  12 +++
>   drivers/net/wireless/ath/ath12k/dp_peer.c  |  75 +++++++++++--
>   drivers/net/wireless/ath/ath12k/dp_peer.h  |   2 +
>   drivers/net/wireless/ath/ath12k/hw.h       |   2 +
>   drivers/net/wireless/ath/ath12k/mac.c      | 165 ++++++++++++++++++++---------
>   drivers/net/wireless/ath/ath12k/peer.c     |  31 +++++-
>   drivers/net/wireless/ath/ath12k/peer.h     |   1 +
>   drivers/net/wireless/ath/ath12k/wifi7/hw.c |  12 +++
>   11 files changed, 293 insertions(+), 61 deletions(-)
> ---
> base-commit: 951dc0a744e4dc8490935316d3b76e23990bde3c
> change-id: 20260527-ath12k-fw-allocated-ml-peer-id-2b456891157f
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram at oss.qualcomm.com>