[PATCH v2] wifi: ath12k: restore country code during resume

[Baochen Qiang]

On 7/20/2026 8:09 PM, Stian Knudsen wrote:
> The country code configured before suspend is lost after resume:
> the device is powered down in suspend_late and powered back up in
> resume_early, so firmware reboots with its default regulatory
> settings and the previously set country code is no longer applied.
> 
> On WCN7850 the firmware comes back in the world regulatory domain
> (country 00) and takes ~7 seconds to rediscover the country code
> from AP beacons, part of a ~16 second total delay before wifi
> reconnects after resume.
> 
> Restore it by resending WMI_SET_CURRENT_COUNTRY_CMDID during resume
> if a country code was set before suspend, i.e. when ar->alpha2 is
> valid. This follows the same approach as ath11k commit 7f0343b7b871
> ("wifi: ath11k: restore country code during resume").
> 
> Note that only single_pdev_only devices support suspend/resume (see
> ath12k_core_continue_suspend_resume()), so handling the first and
> only pdev is sufficient.
> 
> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
> 
> Fixes: 8d5f4da8d70b ("wifi: ath12k: support suspend/resume")
> Suggested-by: Baochen Qiang <baochen.qiang at oss.qualcomm.com>
> Link: https://lore.kernel.org/r/-_iDJ_M5RrqACWB0qmtleg@pokerfj.es
> Signed-off-by: Stian Knudsen <stian at pokerfj.es>
> ---
> v2:
> - Add Fixes tag, per Baochen's review comment.
> - Link to v1: https://lore.kernel.org/r/20260717130254.36732-1-stian@pokerfj.es
> ---
>  drivers/net/wireless/ath/ath12k/core.c | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git a/drivers/net/wireless/ath/ath12k/core.c b/drivers/net/wireless/ath/ath12k/core.c
> --- a/drivers/net/wireless/ath/ath12k/core.c
> +++ b/drivers/net/wireless/ath/ath12k/core.c
> @@ -197,6 +197,7 @@ EXPORT_SYMBOL(ath12k_core_resume_early);
> 
>  int ath12k_core_resume(struct ath12k_base *ab)
>  {
> +	struct ath12k *ar;
>  	long time_left;
>  	int ret;
> 
> @@ -211,6 +212,26 @@ int ath12k_core_resume(struct ath12k_base *ab)
>  		return -ETIMEDOUT;
>  	}
> 
> +	/* So far only single_pdev_only devices can reach here,

bad block comment, '/*' should be on the first line by itself

/*
 * comment start here
 *
 */

no need to respin for this, suppose Jeff can fix it.

> +	 * so it is valid to handle the first, and the only, pdev.
> +	 */
> +	ar = ab->pdevs[0].ar;
> +	if (ab->hw_params->current_cc_support &&
> +	    ar->alpha2[0] != 0 && ar->alpha2[1] != 0) {
> +		struct wmi_set_current_country_arg arg = {};
> +
> +		memcpy(&arg.alpha2, ar->alpha2, 2);
> +
> +		reinit_completion(&ar->regd_update_completed);
> +
> +		ret = ath12k_wmi_send_set_current_country_cmd(ar, &arg);
> +		if (ret) {
> +			ath12k_warn(ab, "failed to set country code during resume: %d\n",
> +				    ret);
> +			return ret;
> +		}
> +	}
> +
>  	return 0;
>  }
>  EXPORT_SYMBOL(ath12k_core_resume);
> --
> 2.50.0

Reviewed-by: Baochen Qiang <baochen.qiang at oss.qualcomm.com>